Hi,
I have built a few weather stations so i'm familiar with the process but
for some reason i can't understand why weewx is not generating reports when
set to SDR mode. Because it works as soon as i change it into simulator
mode.
In simulator mode i can use a local computer to browse 192.168.
Just an update, i think i worked it out...
My [[sensor_map] did not have an underscore between sensor and map.
It's working now.
On Friday, December 18, 2020 at 5:24:02 PM UTC+4 seano...@gmail.com wrote:
> Hi,
>
> I have built a few weather stations so i'm familiar with the
h come every 16 seconds drift with respect with each other
>> until they end up being transmitted at exactly the same time and the
>> receiver can not discriminate them. After half a day or so the situation
>> recovers and is fine for a month or more.
>>
>> Peter
Hi,
Just a quick nudge about this. The Acurite 5-in-1 and the SDR are working,
but there are still times when minutes or hours can pass where the SDR is
not receiving any packets from the sensor, and therefore no broadcasts to
wind guru. Has anyone got any good ideas on troubleshooting this? He
t;
>
>
>
> *From:* weewx...@googlegroups.com *On Behalf
> Of *seano...@gmail.com
> *Sent:* Monday, January 25, 2021 1:22 AM
> *To:* weewx-user
> *Subject:* [weewx-user] Re: Acurite 5in1 and rtl_sdr
>
>
>
> Hi,
>
>
>
> Just a quick nudge about
*UPDATE*:
After 3 days of working perfectly, the pi stopped receiving from the
weather sensor and has not received a single transmission in 48 hours. When
I close weewx and run rtf_433 directly, no sensors are seen either. Today I
collected the devices and brought them home and then plugged the
Hi All,
Thanks for the feedback, very much appreciated.
@mksm... thanks, I will try your suggestions. Funny because I was
originally told to use a 17cm antenna, I'm surprised to hear you mention
31cm ??
Regarding the SDR, it is a solution to capture the broadcasts from the
Acurite 5n1 sensor
Hi,
I have a weather station with Raspberry Pi and a WeatherFlow Tempest
sensor. It has been working perfectly for a few months. Suddenly it is
reporting an incorrect wind speed on windguru. On the Weatherflow app for
iPhone it says 10 knots which is accurate according to the reality.
However,
I have a Acurite 5-in-1 and a raspberry pi with an SDR adaptor that
receives the packets which are then interpreted by weewx and uploaded to
windguru. There is something weird happening that does not make sense to me.
Randomly, for a reason that I cannot understand, the weather station will
sta
Hi,
After many months of not being able to identify why an Acurite 5-in-1
randomly goes offline or broadcasts a zero wind speed when the wind is
often above 10 knots, I have decided to try a different station. I have
purchased a weather flow tempest which works really well using the app.
I am
Hi,
I had a problem before were rtl-sdr got updated and something changed, then
suddenly weewx was receiving an incorrect unit and converting incorrectly
and as a result of that, windguru was reporting wind that was much stronger
that it really was. I seem to be having the same problem again
T
Hi,
I originally had weewx installed using the DEB package which was fine. With
the intention of using multiple instances of weewx for different stations,
I have uninstalled that and then I re-installed weewx using setup.py to the
/home/weewx/
It works perfectly when I run it directly in termi
Just a quick update.
One last attempt to get weewx running at boot before I drive out and format
the microsd card to start fresh. I followed the below article to
automatically run weewx using systemd and it is working now! Thanks for all
the support.
https://github.com/weewx/weewx/wiki/systemd
Just a quick update on this...
I managed to get my weather flow tempest weather station broadcasting to
windguru. This was done by using the weewx extension
https://github.com/captain-coredump/weatherflow-udp
Thanks for all the support. And a big thank you to everyone involved in
creating this
Hi,
My station has been running weewx + rt_sdr for a year and all is working
well. Weewx receives the station data and broadcasts it to windguru.
However, there is an occasional problem that happens and i can't figure out
what the cause is. All of a sudden, rtl_433 stops receiving from the sens
Hi,
I have done many successful installations of weewx on raspberry pi and I
previously installed weewx on MacOS successfully. About a month ago, the
MacOS station stopped reporting so I have been troubleshooting it. I can't
figure out what is going on because I am very poor with python. Can an
Hi,
I seem to be having this same error but I don't understand exactly how to
rectify it. Please can you explain in a simple way how to apply the patch?
Appreciate it, thank you.
On Wednesday, April 12, 2023 at 1:01:59 AM UTC+4 Marius Schamschula wrote:
> I ran into the same error after a rout
ine.py", line 385, in start
self.run()
File "/Users/Shared/weewx/bin/weewx/imagegenerator.py", line 42, in run
self.gen_images(self.gen_ts)
File "/Users/Shared/weewx/bin/weewx/imagegenerator.py", line 114, in
gen_images
image = plot.render()
File &qu
different file.
Appreciate the help, thanks.
On Sunday, May 21, 2023 at 12:52:13 PM UTC+4 seano...@gmail.com wrote:
> Hi Tom,
>
> Thanks for the reply. You are right, I removed the [Logging] section from
> the weewx.conf file and then it ran successfully and I can see all the
>
‘rotate’) that was removed in 4.10.2 and thus causing
>> your runtime error
>>
>> i think in macOS the default behaviour is to log under /var/log/system.log
>>
>> once the default configuration is working, no doubt you will add some
>> entries to [Logging] to u
uot; that updates how
> authentication is done. Perhaps that's the problem? Don't know. You can
> give it a try.
>
> -tk
>
> On Sun, May 21, 2023 at 8:47 AM seano...@gmail.com
> wrote:
>
>> Thank you for the replies and suggestions. The logging is now wo
em with a load
>>>>> balancing server, or something like that. It could be a problem on the
>>>>> windguru end.
>>>>>
>>>>> There's also a pending "pull request
>>>>> <https://github.com/claudobahn/weewx-windguru/pull/4&g
t;>> Re: StationRegistry
>>>> Go to http://weewx.com/stations.html. Nothing is displayed. The GET
>>>> request to /api/v2/stations/?limit=2000 is also returning a 502. So, like
>>>> you said, seems like a server issue…
>>>> rich
>>>>
>
23 matches
Mail list logo
