[weewx-user] Microsoft Edge with Steel Guages

Dont normally use Edge but a school that uses my website has just reported that the Steel Gauge's look a bit odd. If you view www.sheringhamweathercentre.uk you will see what I mean Firefox and Chrome are OK but the school cant use these for reasons I cant remember. I know that Edge is a bit stra

[weewx-user] Added time to produce report on Ver 4.3

Hi I upgraded from v4.1.1 to v4.4 and noticed in the logs that a report took 36 seconds to generate where it use to be only 1 second. Starting back from v4.1.1 I found that the extra time started when I upgraded from v4.2 to v4.3. Im using a Pi4 and on a Pi3 the time was over 70 seconds. After e

Re: [weewx-user] Added time to produce report on Ver 4.3

weewxd, then post the log through > the first reporting cycle. Or, if it's easier, you can use wee_reports. > > > On Mon, Feb 15, 2021 at 9:02 AM philip@gmail.com > wrote: > >> Hi >> I upgraded from v4.1.1 to v4.4 and noticed in the logs that a report took >>

Re: [weewx-user] Added time to produce report on Ver 4.3

Sorry guys upgraded my main machine and its all working OK. On Monday, February 15, 2021 at 8:40:40 PM UTC philip@gmail.com wrote: > I have 2 davis consoles connected to the same Pi, the second one is only > used to record sun hours via the rain terminal and is then stored

Re: [weewx-user] Added time to produce report on Ver 4.3

C tke...@gmail.com wrote: > Just for posterity, what upgrade did you do? > > On Tue, Feb 16, 2021 at 9:33 AM philip@gmail.com > wrote: > >> Sorry guys upgraded my main machine and its all working OK. >> >> >> On Monday, February 15, 2021 at 8:40:40 PM UTC phi

[weewx-user] Realtime-_gauge-data.txt

Hi Guys Ive tried and failed to get the rsync to work using realtimeguagedata I never get passed gauge-data.txt file will not be exported. Here is an extract of the log. May 17 11:38:34 raspberrypi weewx-weewx[352] INFO user.rtgd: version is 0.5.5 May 17 11:38:34 raspberrypi weewx-weewx[352] INFO

[weewx-user] Re: Realtime-_gauge-data.txt

and got it to work your ideas on why I cant get rsync to work with RTGD would be most welcome Thanks On Tuesday, May 17, 2022 at 12:00:44 PM UTC+1 philip@gmail.com wrote: > Hi Guys > Ive tried and failed to get the rsync to work using realtimeguagedata > > I never get passed ga

Re: [weewx-user] Re: Realtime-_gauge-data.txt

and move on to the next if this data is > older > # than 4 seconds. > > On May 19, 2022, at 6:37 AM, philip@gmail.com > wrote: > > Just to update > > Have a cron job working Ok with > rsync -v /home/weewx/public_

Re: [weewx-user] Re: Realtime-_gauge-data.txt

entries need to be under an Rsync section: > [RealtimeGaugeData] > . > . > . > [Rsync] > rsync_server=xxx > Rsync_user=LushEr21 > etc. > > If that doesn’t work, I will install the extension and get it working. > > On May 21, 2022, at 3:18 AM, philip@gm

Re: [weewx-user] Re: Realtime-_gauge-data.txt

gd: Thread exiting. Reason: 'dateTime' Phil On Sunday, May 22, 2022 at 2:08:31 PM UTC+1 jo...@johnkline.com wrote: > Oh, yes, two brackets. What failures did you get with two brackets? > > On May 22, 2022, at 2:59 AM, philip@gmail.com > wrote: > > Thanks John

Re: [weewx-user] Re: Realtime-_gauge-data.txt

self.exporter.export(data) > +self.exporter.export(data, packet['dateTime']) > # log the generation > if weewx.debug == 2: > log.info("gauge-data.txt (%s) generated in %.5f &

Re: [weewx-user] Re: Realtime-_gauge-data.txt

g the rsync in weewx? > > On May 23, 2022, at 1:15 PM, philip@gmail.com > wrote: > > Im using rsync to copy the public_html folder to my server using a cron > job every 10mins = rsync -a /home/weewx/public_html/ > lush...@192.xxx.x.xxx etc etc > > Then t

[weewx-user] Database Disk Image Is malformed

Hi Guys I have two RaspPi's running weewx seperatly with there own console from the same the weather station. At 8.40 on one and 08.50 on the other they both failed with the same thing Database Disk Image is malformed. Both have been running for a long time without problems. They are both at V

Re: [weewx-user] Database Disk Image Is malformed

Thanks Everybody It was a database that gets stored on a NAS that had become corrupted luckily I do daily backups. On Saturday, April 17, 2021 at 5:43:59 PM UTC+1 vince wrote: > Wild guess here, but do you have your database(s) remotely mounted on a > NAS or some kind of fileserver ? > > -- Y

[weewx-user] Steel Gauges on https

When I use https:// the steel gauges will not display (http:// is OK) Have tried this on Firefox and Edge Is there something I need to change to get this to work Thanks for any help Phil -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubsc

[weewx-user] Re: Steel Gauges on https

:40:22 AM UTC-7 philip....@gmail.com wrote: > >> When I use https:// the steel gauges will not display (http:// is OK) >> Have tried this on Firefox and Edge >> Is there something I need to change to get this to work >> >> > We'd need a 'lot'

[weewx-user] Re: Steel Gauges on https

com wrote: > >> Hi, >> >> Wild guess : do you have a recent enough version of the steel series? >> See this issue : >> https://github.com/mcrossley/SteelSeries-Weather-Gauges/pull/18 >> >> Regards, >> >> >> On Tuesday, June 22, 2021 at 10:0

[weewx-user] Trying to gee AS3935 to work with weewx 4.5.1

Have a new install of weewx installed (4.5.1) on a Raspberry Pi and using the Simulator driver loaded the zip file from as3935 · weewx/weewx Wiki · GitHub with no problems Stopped and Started weewx but will not start now. Jul 26 20:27:08 raspberrypi

[weewx-user] Re: Trying to gee AS3935 to work with weewx 4.5.1

Thanks Vince Changed Line 233 to except Exception as e: It then moved to Line 73 === no such module but sudo pip3 install RPi_AS3935 seems to have cured that (Installed ver 0.2.0 OK) Now it stuck on Line 153 'object not callable. (address=addr, bus=bus) In weewx.conf I have [AS3935] address = 3

[weewx-user] Re: Trying to gee AS3935 to work with weewx 4.5.1

y >> 4.x releases. Python 4.0.0 and later are also python 3 compatible. It all >> comes down to what dependencies you have installed and what version of >> python WeeWX is run under. >> >> Gary >> >> On Tuesday, 27 July 2021 at 19:51:04 UTC+10 philip@gmail.com

[weewx-user] Re: Trying to gee AS3935 to work with weewx 4.5.1

In the as3935.py On Saturday, July 31, 2021 at 10:45:17 AM UTC+1 philip@gmail.com wrote: > Thanks Doug but it didnt make any difference > As Im trying to use a DFRobot AS3935 I started again but this time on > Python2 > The i2cdetect -y 1 shows 03 show it appears the Raspberr

[weewx-user] Re: Trying to gee AS3935 to work with weewx 4.5.1

the field names changed ?? The test will be when I get any lightning I shall keep you posted. On Saturday, July 31, 2021 at 12:59:38 PM UTC+1 philip@gmail.com wrote: > In the as3935.py > > On Saturday, July 31, 2021 at 10:45:17 AM UTC+1 philip@gmail.com > wrote: > >&g

[weewx-user] Re: Trying to gee AS3935 to work with weewx 4.5.1

06:06 PM UTC+1 philip@gmail.com wrote: > In the as3935.py I noticed for LOOP working I have to put that in the > weewx.conf file which then showed lightning_strikes = 0 > When checking the weewx.sdb it didnt have a lightning_strikes field its > called lightning_strikes_cou

[weewx-user] Re: Trying to gee AS3935 to work with weewx 4.5.1

om: > > from RPi_AS3935 import RPi_AS3935 > > to: > > from RPi_AS3935.RPi_AS3935 import RPi_AS3935 > > Seems to be related to the situation discussed here > > https://stackoverflow.com/questions/4534438/typeerror-module-object-is-not-callable > On Saturday, 7 August

[weewx-user] Re: Trying to gee AS3935 to work with weewx 4.5.1

elate to some other figure Thanks in anticipation Phil On Sunday, August 8, 2021 at 4:32:05 PM UTC+1 philip@gmail.com wrote: > Im using python2 so as to get a lightning detector to work to that > Just had several lightning strikes overhead but it only recorded 1 strike > 10km away an

[weewx-user] Generating Monthly HTML reports

Using $SummaryByMonth (Month-%Y-%m.html.tmpl) I produce a monthly report in HTML format and to make it easier to view I would like a full list of all months in a drop down list on all reports. Using #for $monthYear in $SummaryByMonth only gives a list up to the report date nothing beyond. Using

Re: [weewx-user] Re: Davis AirLink and PurpleAir

Ive loaded John's weewx-airlink-master.zip but get the following Sep 28 13:02:57 raspberrypi weewx-weewx[25663] ERROR user.airlink: Could not get concentrations from any source. Sep 28 13:02:58 raspberrypi weewx-weewx[25663] ERROR user.airlink: Found no fresh concentrations to insert. Sep 28 13:0

Re: [weewx-user] Re: Davis AirLink and PurpleAir

Monday, September 28, 2020 at 7:45:35 PM UTC+1 jo...@johnkline.com wrote: > Did you edit weewx.conf and specify the correct host (which could be an IP > address)? > > [AirLink] > [[Sensor1]] > enable = True > hostname = airlink <<<< This needs

Re: [weewx-user] Re: Davis AirLink and PurpleAir

ohn > > On Sep 28, 2020, at 12:16 PM, philip@gmail.com > wrote: > > No hadn't done that and now looks a little more promising but now I get > Sep 28 20:08:41 raspberrypi weewx-weewx[4553] INFO user.airlink: airlink > reading not sane: {'data': {'d

Re: [weewx-user] Re: Davis AirLink and PurpleAir

Hi John The log is all clear and you can have a look at the demo page at http://sheringhamweather.ddns.net/airlink/index.html Thanks Phil On Monday, September 28, 2020 at 11:05:17 PM UTC+1 philip@gmail.com wrote: > Thanks John Appreciate all your hard work > Will let you know

Re: [weewx-user] Re: Davis AirLink and PurpleAir

ing me know. > > On Sep 29, 2020, at 2:52 AM, philip@gmail.com > wrote: > > Hi John > > The log is all clear and you can have a look at the demo page at > http://sheringhamweather.ddns.net/airlink/index.html > Thanks > Phil > > On Monday, Septemb

[weewx-user] weectl extension install ~/Downloads/weewx-steelseries-master.zip

Hi Using a Pi5 with a clean install of all software (Debian 12 bookworn). Loaded weewx v5.0.2 using Installation on Debian based systems all OK Then tried loading extensions using weectl which all worked OK until I tried weectl extension install ~/Downloads/weewx-steelseries-master.zip. It failed w

[weewx-user] Re: weectl extension install ~/Downloads/weewx-steelseries-master.zip

eleases> and install > from the package file. > > Gary > > On Sunday 3 March 2024 at 23:16:34 UTC+10 philip@gmail.com wrote: > >> Hi >> Using a Pi5 with a clean install of all software (Debian 12 bookworn). >> Loaded weewx v5.0.2 using Installation o

[weewx-user] Loading Xtides with Forecast

Im loading weewx V5 from new and while installing the forecast program I notice that XTides is no longer available. Can somebody point me in the right direction please as to how I can get XTides to work Thanks -- You received this message because you are subscribed to the Google Groups "weewx

[weewx-user] Re: Loading Xtides with Forecast

pts... or snippets from > your weewx.conf file... sorry, nobody can help much > > On Sunday, June 16, 2024 at 10:09:59 AM UTC-7 philip....@gmail.com wrote: > >> Im loading weewx V5 from new and while installing the forecast program I >> notice that XTides is no longer

[weewx-user] Re: Loading Xtides with Forecast

Im trying yours again John and its OK when I do ./configure but when I try make it replies make: ***No targets specified and no makefile found. Stop I take it thats not what I should get back Phil On Sunday, June 16, 2024 at 6:44:59 PM UTC+1 philip@gmail.com wrote: > Im using

Re: [weewx-user] Re: Loading Xtides with Forecast

No targets specified and no makefile found. Stop > >I take it thats not what I should get back > > That’s hard to imagine if you are in the correct directory. Exactly what > directory were you in when you typed make? > > > On Jun 16, 2024, at 11:41 AM, philip@gmail.c

Re: [weewx-user] Re: Loading Xtides with Forecast

Hi John Still no joy Unzipped your file and loaded it into directory xtide-2.15.5 as tide In weewx.conf under [[XTide]] prog = /home/phil/xtide-2.25.5/tide Then carried on from your readme notes sudo apt install xtide-data sudp apt instal xtide-data-nonfree Both loaded OK created /etc/xtide.conf A

Re: [weewx-user] Re: Loading Xtides with Forecast

Thought that your file needs to be an executable so from the xtide-2.15.5 directory On Monday, June 17, 2024 at 10:15:51 AM UTC+1 philip@gmail.com wrote: > Hi John > Still no joy > > Unzipped your file and loaded it into directory xtide-2.15.5 as tide > In weewx.conf under

Re: [weewx-user] Re: Loading Xtides with Forecast

Sorry sent to early Thought that your file needs to be an executable so from the xtide-2.15.5 directory sudo chmod +x tide Still no tidal events On Monday, June 17, 2024 at 10:23:15 AM UTC+1 philip@gmail.com wrote: > Thought that your file needs to be an executable so from the xtide-2.1

Re: [weewx-user] Re: Loading Xtides with Forecast

; I don’t see a “prog = “ line in the XTide section (per my instructions). > Did you do that? > And did you create a /etc/xtide.conf file? > > Would you please follow the instructions line by line? > > On Jun 17, 2024, at 2:26 AM, philip@gmail.com > wrote: > > S

Re: [weewx-user] Re: Loading Xtides with Forecast

n how you have set this up (but probably > journalctl). > > On Jun 17, 2024, at 6:52 AM, philip@gmail.com > wrote: > > If you look at my 1015 post it has this in it > > created /etc/xtide.conf > Added /usr/share/xtide into the file > > Ive sent you my weewx.c

Re: [weewx-user] Re: Loading Xtides with Forecast

xtide directory: > > rm -rf xtide-2.15.5 > tar -zxvf xtide-2.15.5.tar.gz > > Then try executing tide again. If that works, restart weewx and see if it > works. > > On Jun 17, 2024, at 8:04 AM, philip@gmail.com > wrote: > > phil@raspberrypi:~ $ /home/phil/xti

Re: [weewx-user] Re: Loading Xtides with Forecast

> point to try make. > > I am surprised that you can’t configure since we’re running the same OS. > I have the lite version of Bookworm 64-bit installed. Do you have the > full version? > > > On Jun 17, 2024, at 9:36 AM, philip@gmail.com > wrote: > > 

Re: [weewx-user] Re: Loading Xtides with Forecast

sh: tide: command not found As this didnt work I stopped as I believe you said if that does not work its no good Have put all this in the text file I hope ?? On Monday, June 17, 2024 at 7:17:49 PM UTC+1 philip@gmail.com wrote: > I use the Raspberry Pi Imager with Pi5 and Pi 5 64 Bit s

Re: [weewx-user] Re: Loading Xtides with Forecast

OOPs Yes I did Oh well 3rd time luck On Tuesday, June 18, 2024 at 2:42:45 PM UTC+1 John Kline wrote: > > Then used tar -zxvf xtide-2.15.5.tar.gz and changed to that directory > > Which tar did you use? You cannot use the file I sent you. > > On Jun 18, 2024, at 6:24 AM, ph

Re: [weewx-user] Re: Loading Xtides with Forecast

This time i used the correct file but as you can see from the file Im attaching going down your readme file when I get to make it seems to fail so I didnt go any further On Tuesday, June 18, 2024 at 3:49:28 PM UTC+1 philip@gmail.com wrote: > OOPs Yes I did > Oh well 3rd time luck

Re: [weewx-user] Re: Loading Xtides with Forecast

2 PM UTC+1 John Kline wrote: > Try: > sudo apt install libfreetype6 > > And then re-run configure. Again, there is no need to run make (which you > did again) if the configure ends in an error. > > On Jun 18, 2024, at 11:37 AM, philip@gmail.com > wrote: > > This

Re: [weewx-user] Re: Loading Xtides with Forecast

ookworm and I am building on lite. Try this for the configure step: > > ./configure --with-x=no > > That *should* build what I am building (tide, but not xtide). I’m > guessing this will work, but let me know. If it does, I’ll update the > README. > > > On Jun 18,

Re: [weewx-user] Re: Loading Xtides with Forecast

sorry forgot to add the txt file On Tuesday, June 18, 2024 at 10:13:45 PM UTC+1 philip@gmail.com wrote: > It looks more promising. > I haven't gone pass makebut if its what you expected will carry on > but not until tomorrow. > But thanks so far > Phil > > &

[weewx-user] weewx-aqi

Am trying to get the weewx-aqi to calculate to the - United Kingdom's Daily Air Quality Index It works ok to the default standard = user.aqi.us.NowCast I take it the change is made in the weewx.conf file [AqiService] [[standard]] data_binding = aqi_binding standard = user.aqi.us.NowCast

[weewx-user] Re: weewx-aqi

Found it. Its user.aqi.uk.DailyAirQualityIndex Phil On Friday, April 28, 2023 at 2:17:23 PM UTC+1 philip@gmail.com wrote: > Am trying to get the weewx-aqi to calculate to the > >- United Kingdom's Daily Air Quality Index > > It works ok to

Re: [weewx-user] Re: Loading Xtides with Forecast

de command not found On Tuesday, June 18, 2024 at 10:31:58 PM UTC+1 John Kline wrote: > I checked your output. It looks like configure and make succeeded. You > should be good to go. > > On Jun 18, 2024, at 2:16 PM, philip@gmail.com > wrote: > > sorry forgot to add

Re: [weewx-user] Re: Loading Xtides with Forecast

Do make again and then send a listing of the directory. > ls -l /home/phil/xtide-2.15.5 > > On Jun 19, 2024, at 2:17 PM, philip@gmail.com > wrote: > > Added location = "Palo Alto Yacht Harbor, San Francisco Bay, California" > prog = /home/phil/xtide-2.15.5/tide > su

Re: [weewx-user] Re: Loading Xtides with Forecast

t: XTideThread: XTide: saved 108 forecast records > 2024-06-19T15:15:03.585208-07:00 judygirldog5 weewxd[1638636]: INFO > user.forecast: XTideThread: XTide: deleted forecasts prior to 1716416103 > > On Jun 19, 2024, at 2:44 PM, philip@gmail.com > wrote: > > The tide pr

Re: [weewx-user] Re: Loading Xtides with Forecast

put Cromer (no quotes) in weewx.conf. > > On Jun 20, 2024, at 4:08 AM, philip@gmail.com > wrote: > > Sorry bad wording on my part. Didnt move anything just went into > different sun-directories from the terminal prompt. > > > Have deleted forecast.sdb and get the same

Re: [weewx-user] Re: Loading Xtides with Forecast

ontains “/usr/share/xtide” > In turn, /usr/share/xtide contains: > harmonics-dwf-20100529-nonfree.tcd harmonics-dwf-20191229-free.tcd > > > On Jun 20, 2024, at 11:25 AM, philip@gmail.com > wrote: > > Changed weewx.conf > > Deleted forecast.sdb > Restarted weewx

Re: [weewx-user] Re: Loading Xtides with Forecast

n (ls -l) on > file and directory that we need to access. > > In particular, starting with bookworm, a user’s home directory is not > acessible by other users. As such, > ls -ld /home/phil > would be particularly useful command to run. > > On Jun 20, 2024, at 12:28 PM, phili

Re: [weewx-user] Re: Loading Xtides with Forecast

following: > chmod 755 /home/phil > > And then see if the tides populate on the next run. > > On Jun 20, 2024, at 1:22 PM, philip@gmail.com > wrote: > > Not familiar with much to do with permissions but as a starting point is > this what you meant > > phil@raspberr

Re: [weewx-user] Re: Loading Xtides with Forecast

philip@gmail.com wrote: > phil@raspberrypi:~ $ ls -ld /home/phil > drwx-- 15 phil phil 4096 Jun 20 20:31 /home/phil > > phil@raspberrypi:~ $ chmod 755 /home/phil > > > phil@raspberrypi:~ $ ls -ld /home/phil > drwxr-xr-x 15 phil phil 4096 Jun 20 20:31 /home/phil

[weewx-user] UDEV Rules for USB0/1 Ports

Im using weewx V5.02 and Im using https://github.com/weewx/weewx/wiki/weewx-multi to connect 2 vantage pro consoles. All is working as expected. However when I moved the raspberry pi and connected the power back on the /dev/ttyUSB 0 and 1 had switched over. In the wiki I found a document on U

[weewx-user] Re: UDEV Rules for USB0/1 Ports

Thanks Matthew Cant find anything different for the 2 dataloggers so it looks like each datalogger has to be on its own raspi On Sunday, July 7, 2024 at 12:09:06 PM UTC+1 matthew wall wrote: > On Sunday, July 7, 2024 at 6:38:23 AM UTC-4 philip....@gmail.com wrote: > > They look identi

[weewx-user] Eco Lightning into the rtgd guage-data.txt

Im trying to get Steel Gauges to display lightning counts from ecowitt so was wondering if its possible to get the lightning count into the gauge-data.txt. Phil -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and s

Re: [weewx-user] UDEV Rules for USB0/1 Ports

sb bus - look beyond the simple attributes > *⊣GE⊢* > > On 8 Jul 2024, at 3:56 AM, philip@gmail.com > wrote: > > Cant find anything different for the 2 dataloggers > > > -- You received this message because you are subscribed to the Google Groups "weewx-user"

[weewx-user] Rsync on V5..0.2 not working and alos on v5.1

Ive built a new build on raspi 5 with weewx 5.02 and it all works ok apart from rsync to my local server . Ive set up ssh-keygen from the home directory and to the root withh sudo -i rsync works in a .sh file via crontab Ive tried the following phil@raspberrypi:~ $ rsync -a /etc/weewx/webpage

Re: [weewx-user] Rsync on V5..0.2 not working and alos on v5.1

eewx (the default for V5.x), root, LushEr21, or something > else? > > See the wiki *rsync troubleshooting > <https://github.com/weewx/weewx/wiki/rsync-troubleshooting>*. > > On Wed, Jul 10, 2024 at 7:57 AM philip@gmail.com > wrote: > >> Ive built a new buil

Re: [weewx-user] Rsync on V5..0.2 not working and alos on v5.1

LushEr...(at)192.168.1.157 > vs > server = 192.68.1.157 > > > On Thursday 11 July 2024 at 8:17:53 pm UTC+10 philip@gmail.com wrote: > >> Thanks Tom >> Ive confused myself so any help is appreciated. >> I loaded weewx via Debian on a new build if thats any help w

Re: [weewx-user] Rsync on V5..0.2 not working and alos on v5.1

92.168.1.157. > > > On Thu, Jul 11, 2024 at 5:44 AM philip@gmail.com > wrote: > >> Thanks Glenn and well spotted. >> But still fails. >> It now has an extra line in the logs " Host key verification failed" >> Now the ssh keys have been add

Re: [weewx-user] Rsync on V5..0.2 not working and alos on v5.1

as? > > 2. You can determine the user weewxd is running as with the command: > > *systemctl show -p User weewx* > > 3. What is the home directory for that user? > > > > > On Fri, Jul 12, 2024 at 4:20 AM philip@gmail.com > wrote: > >> Hi Tom >> I

Re: [weewx-user] Rsync on V5..0.2 not working and alos on v5.1

've > manually changed things > > (from my /etc/passwd in a clean 5.1.0-4 installation) > weewx:x:104:109::/var/lib/weewx:/usr/sbin/nologin > > > On Friday, July 12, 2024 at 8:05:04 AM UTC-7 philip@gmail.com wrote: > >> User=weewx >> home directory for w

Re: [weewx-user] Rsync on V5..0.2 not working and alos on v5.1

allation) per the /etc/password file definition of > its home directory, so it would be /var/lib/weewx > > > On Friday, July 12, 2024 at 9:32:05 AM UTC-7 philip@gmail.com wrote: > >> Vince >> I thought weewx $Home directory is where the bin/init.d folders are which

[weewx-user] UKMO weather forecast via weather-forcast extension

Hi Im having trouble with The 3 hourly forecast from the UKMO using datapoint. It can be a couple of days between updates, I report it via there helpdesk which responds DATAPOINT IS NOW UNSUPPORTED AND WILL BE CEASED ON DEC 2025, The updates then start for a few days then stop again. Has anyb

[weewx-user] Re: UKMO weather forecast via weather-forcast extension

UTC+1 philip@gmail.com wrote: > Hi > Im having trouble with The 3 hourly forecast from the UKMO using > datapoint. It can be a couple of days between updates, I report it via > there helpdesk which responds DATAPOINT IS NOW UNSUPPORTED AND WILL BE > CEASED ON DEC 2025, T

[weewx-user] Forecast V3.4.ob2 Problems

weewx V 5.1.0 Been having problems getting downloads from UKMO for a while now but only started to look into it. It downloads 4/5 cycles Ok and then fails 025-08-04T12:50:17.090123+01:00 raspberrypi weewxd[1790]: ERROR user.forecast: UKMOThread: UKMO: missing field 'Location' 2025-08-04T12:50:17

[weewx-user] Forecast Program

Sorry to have to ask and its probably a question for John K or Mathew H but is there any thoughts to add UKMO datahub to the the forecast program Thanks in Advance Phil -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this grou

Re: [weewx-user] Forecast V3.4.ob2 Problems

reason. > > https://claydonsweather.org.uk > > On 4 Aug 2025, at 13:21, philip@gmail.com > wrote: > >  > > weewx V 5.1.0 > Been having problems getting downloads from UKMO for a while now but only > started to look into it. > It downloads 4/5 cycles Ok and then

Re: [weewx-user] Forecast V3.4.ob2 Problems

; > https://claydonsweather.org.uk > > On 4 Aug 2025, at 13:21, philip@gmail.com > wrote: > >  > > weewx V 5.1.0 > Been having problems getting downloads from UKMO for a while now but only > started to look into it. > It downloads 4/5 cycles Ok and then fails > > 025-08-

Re: [weewx-user] Forecast V3.4.ob2 Problems

; > https://claydonsweather.org.uk > > On 4 Aug 2025, at 13:21, philip@gmail.com > wrote: > >  > > weewx V 5.1.0 > Been having problems getting downloads from UKMO for a while now but only > started to look into it. > It downloads 4/5 cycles Ok and then fails >