My Davis system has been running really well for the last 2 years. Needed
no maintenance from me etc. Then the Envoy started tripping the circuit
fuse (I think it was the Envoy rather than the power chord as I replaced
with new Envoy and tripping stopped). I directly changed out the Envoy and
r
eeWX was restarted through until the two archive periods
> have passed. Post the log back here without alteration. It’s important you
> capture the full WeeWX startup.
>
> Gary
>
> On Monday, 22 February 2021 at 18:28:14 UTC+10 monmul wrote:
>
>> My Davis system has
> good place to start. The instructions are now in the wiki rather than the
> User Guide but the link I have provided should work.
>
> Gary
> On Monday, 22 February 2021 at 19:43:26 UTC+10 monmul wrote:
>
>> Feb 22 22:39:02 WeatherPi systemd[1]: Starting LSB: weewx weather
&g
/dev/ttyUSB0*
>
>
>
> On Tue, Feb 23, 2021 at 9:19 PM monmul wrote:
>
>> No change in USB port.
>>
>> pi@WeatherPi:~ $
>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0
>> minicom: cannot open /dev/ttyUSB0: Device or resource busy
>> pi@WeatherP
/dev/ttyUSB0
bash: lsof: command not found
pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0
sudo: lsof: command not found
pi@WeatherPi:~ $
On Thursday, 25 February 2021 at 17:17:03 UTC+13 gjr80 wrote:
> Try prefixing lsof with sudo.
>
> Gary
>
> On Thursday, 25 February 2021 at 14:15:17 UTC+
it manually. Try:
>
> $ sudo apt update
> $ sudo apt install lsof
>
> then try running lsof.
>
> Gary
>
> On Thursday, 25 February 2021 at 14:19:30 UTC+10 monmul wrote:
>
>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop
>> [ ok ] Stopping weewx (via sys
about screen.
>
> Gary
>
> On Thursday, 25 February 2021 at 15:58:07 UTC+10 monmul wrote:
>
>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop
>> [ ok ] Stopping weewx (via systemctl): weewx.service.
>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0
>> lsof: WARN
ting out of my depth now.
>
> Gary
>
> On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul wrote:
>
>> I am using VNC Viewer (and always have) rather than SSHnot sure if
>> that makes any difference?
>>
>> On Thursday, 25 February 2021 at 19:13:29 U
day, 26 February 2021 at 11:19:41 UTC+13 vince wrote:
> So go ahead and restart it now.
>
> On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul wrote:
>
>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop
>> [ ok ] Stopping weewx (via systemctl): weewx.service.
>&g
ecial keys
On Saturday, 27 February 2021 at 02:19:42 UTC+13 tke...@gmail.com wrote:
> Monmul, we have not definitively heard whether or not you are able to do
> the test listed under *Establishing connectivity
> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-sta
February 2021 at 08:04:10 UTC+10 monmul wrote:
>
>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0
>> minicom: cannot open /dev/ttyUSB0: Device or resource busy
>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop
>> [ ok ] Stopping weewx (via systemctl): weewx.service.
>
problem.
>
>
> On Sat, Feb 27, 2021 at 3:54 PM monmul wrote:
>
>> The screen shows blank when I get to the point above.after hitting
>> enter a few times, it just sends the cursor down the screen..I tried
>> typing TEST but no response...just a dark screen
Sorry, I don't quite understand what you mean by "reseat"?
On Sunday, 28 February 2021 at 14:40:11 UTC+13 tke...@gmail.com wrote:
> You can try reseating the logger.
>
> On Sat, Feb 27, 2021 at 5:16 PM monmul wrote:
>
>> Neither TEST nor NVER returns
Envoy (or console) and remaking the
> connection by reseating can sometimes fix this.
>
> Gary
>
> On Sunday, 28 February 2021 at 12:53:17 UTC+10 monmul wrote:
>
>> Sorry, I don't quite understand what you mean by "reseat"?
>>
>> On Sunday
it
would go. Am I missing something?
On Sunday, 28 February 2021 at 19:42:44 UTC+13 monmul wrote:
> Thank you, I will give that a try!
>
> On Sunday, 28 February 2021 at 19:31:21 UTC+13 gjr80 wrote:
>
>> Reseat means to remove the logger from the Envoy and then reinstall the
March 2021 at 17:38:18 UTC+13 monmul wrote:
> I have not had time to do the reseating yethopefully later today. One
> thing strikes me (probably becuase it has been so long since I set it up) I
> just switched envoys, how does the net envoy know what to do...I have not
> gone to an
ke...@gmail.com wrote:
>
>> What do you mean by "net Envoy"? If you are using a serial port like
>> /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a
>> network connector. Or, are you using an IP logger?
>>
>> On Wed, Mar 3, 202
e days), then
> what serial port are you plugging it into?
>
>
>
> On Thu, Mar 4, 2021 at 11:59 AM monmul wrote:
>
>> Yes, apologieswas in a rush typing and did not review."new
>> envoy"..it should be...and "initiation" is the other typo!
>
Not using serial...using USB.
On Friday, 5 March 2021 at 10:34:32 UTC+13 monmul wrote:
> pi@WeatherPi:~ $ lsusb
> Bus 001 Device 006: ID 0403:6001 Future Technology Devices International,
> Ltd FT232 Serial (UART) IC
> Bus 001 Device 005: ID 13fe:4100 Kingston Technology Compan
pi@WeatherPi:~ $ lsusb
Bus 001 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash
drive
Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514
Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Stan
So everything reseated and restarted...unplugged USB to ensure that the Pi
was seeing the USB..used "screen /dev/ttyUSB0 19200" after shutting
down weewxstill blank screen (after a number Enters) with no echo back
to TEST and NVR
On Friday, 5 March 2021 at 17:29:45 UTC+13 mo
minicom.
>
> If nothing works, a call to Davis is in order.
>
> -tk
>
> On Fri, Mar 5, 2021 at 5:00 PM monmul wrote:
>
>>
>> So everything reseated and restarted...unplugged USB to ensure that the
>> Pi was seeing the USB..used "screen /dev/ttyUS
dhcpcd[361]: wlan0: soliciting a DHCPv6 lease
On Sunday, 7 March 2021 at 00:34:16 UTC+13 tke...@gmail.com wrote:
> Nothing that we haven't seen before: your RPi cannot connect with the
> logger.
>
> On Fri, Mar 5, 2021 at 7:18 PM monmul wrote:
>
>> Thanks for that, I
Hmmm! while it appears to be working with the "old" Envoy (if my reading of
the log is correct)..the website is not updatingso I am wondering
if any data is getting through!
On Sunday, 7 March 2021 at 18:45:08 UTC+13 monmul wrote:
> OK, so I decided to put the "
Weather Underground also not updating and showing station as
offline.Hmmm!
On Sunday, 7 March 2021 at 19:17:32 UTC+13 monmul wrote:
> Hmmm! while it appears to be working with the "old" Envoy (if my reading
> of the log is correct)..the website is not updatingso I
ff:feb7:82a1
Mar 7 19:22:45 WeatherPi dhcpcd[361]: wlan0: soliciting a DHCPv6 lease
Mar 7 19:22:47 WeatherPi ntpd[519]: 122.252.188.99 local addr 10.1.1.8 ->
Mar 7 19:22:50 WeatherPi dhcpcd[361]: wlan0: Router Advertisement from
fe80::724f:57ff:feb7:82a1
Mar 7 19:22:50 WeatherPi dhcpcd[361
Even curiouserthe photo which is supposed to update every 20 minutes
does updatebut not the weather data...still stuck on 21/2/2021
www.wilsonbayweather.com
On Sunday, 7 March 2021 at 19:25:07 UTC+13 monmul wrote:
> Mar 7 19:20:15 WeatherPi weewx[789] DEBUG weewx.drivers.vant
weewx.WeeWxIOError: Unable to read hardware type
On Monday, 8 March 2021 at 02:16:46 UTC+13 tke...@gmail.com wrote:
> *WeeWX generates HTML pages, but it does not update them
> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#weewx-generates-html-pages-but
t in touch
> with Davis or their agent.
>
> Gary
>
> On Tuesday, 9 March 2021 at 15:36:38 UTC+10 monmul wrote:
>
>> Is this telling me that my "old" Envoy is indeed broken?
>>
>> pi@WeatherPi:~ $ wee_device --clear-memory
>> Using configurat
o come
> with some sort of terminal program. Not sure about a Mac. Certainly no need
> to install WeeWX, you just want to run the connectivity test with your
> Envoy(s) to prove it(they) respond(s).
>
> Gary
>
> On Tuesday, 9 March 2021 at 16:30:25 UTC+10 monmul wrote:
>
>
Tue, Mar 9, 2021 at 5:15 PM monmul wrote:
>
>> Cool, thanks, will get on that with my laptop in the next day or
>> sothank you!
>>
>> On Tuesday, 9 March 2021 at 19:37:16 UTC+13 gjr80 wrote:
>>
>>> Anything will do, no grunt needed, all you need is a
Been MS free since 2008. Never used Apple. Got Lineage on my phone.
On Tuesday, 9 March 2021 at 21:55:46 UTC+13 gjr80 wrote:
> Someone who has seen the light! :)
>
> On Tuesday, 9 March 2021 at 18:27:36 UTC+10 monmul wrote:
>
>> Thanks, I only have Ubuntuan
udDrive
Output information may be incomplete.
pj@pj-selgbuild:~$
On Tuesday, 9 March 2021 at 21:58:49 UTC+13 monmul wrote:
> Been MS free since 2008. Never used Apple. Got Lineage on my phone.
>
> On Tuesday, 9 March 2021 at 21:55:46 UTC+13 gjr80 wrote:
>
>> Someone who has seen t
TEST
TEST
OK
1.82
On Thursday, 11 March 2021 at 14:14:18 UTC+13 monmul wrote:
> Hmm! nothiing shows...I have a USB port plugged into this pc...and none of
> the USBs show?!?!
>
> pj@pj-selgbuild:~$ sudo lsof /dev/ttyUSB0
> [sudo] password for pj:
> lsof: WARNING: can
as a text string. This command
> is only supported by Vantage Pro2 (Firmware 1.90 or later) and Vantage Vue.
>
>
> Gary
> On Thursday, 11 March 2021 at 11:23:43 UTC+10 monmul wrote:
>
>> j@pj-selgbuild:~$ sudo lsof /dev/ttyUSB0
>> lsof: WARNING: can't s
New Envoy shows no response to TEST or NVER...so that one is definately
dead I think!
On Thursday, 11 March 2021 at 15:39:36 UTC+13 monmul wrote:
> "WRD"<0x12><0x4d>, ACK .not sure hot to use this commandis it just
> "WRD"?
> This is the old Env
I notice the old Envoy beeps twice when I plug it in but the new one only
beeps once.
On Thursday, 11 March 2021 at 16:01:11 UTC+13 monmul wrote:
> New Envoy shows no response to TEST or NVER...so that one is definately
> dead I think!
>
> On Thursday, 11 March 2021 at 15:
known-working data logger and cable?
>
> On 11 Mar 2021, at 2:09 pm, monmul wrote:
>
> New Envoy shows no response to TEST or NVER...so that one is definately
> dead I think!
>
>
>
--
You received this message because you are subscribed to the Google Groups
"wee
sure a search of the
>> forum archive would see if that was relevant
>>
>> On 11 Mar 2021, at 2:17 pm, monmul wrote:
>>
>> Yes I am using the original data logger and cable that came with the old
>> EnvoyI take out the data logger from he old one and put
ÀÿÿÿPÿ 5‘? ÿÿÿ½ b 2
¤LOO1 =vŠ 4I ÀÿÿÿPÿ 5‘? ÿÿÿ½ b 2
âYLOO1 =vŠ 4I ÁÿÿÿPÿ 5⊑? ÿÿÿ½ b 2
¾LOO1 =vŠ 4I Áÿÿÿ
On Friday, 12 March 2021 at 12:40:56 UTC+13 monmul wrote:
> But from the te
.
.
.
Again no return of TEST or NVER
On Friday, 12 March 2021 at 12:46:43 UTC+13 monmul wrote:
> So, having put the old Envoy back on the Rpi (having shown it worked on
> the PC) this is what I getlooks like some kind of continuous Loop
> situation.
>
> pi@WeatherPi:~ $ sudo /etc/in
other thought occurs to me...I have a powered USB Hub attached to the
RPi(its a 3B)maybe I should disconnect the hub and try the Envoy
directly into the RPi..if minicom works that would point to the Hub as
being the culpit!!??
On Friday, 12 March 2021 at 12:51:51 UTC+13 monmul wrote
Hmmm! even more curiouserI notice from my webpage that data was
collected and posted yesterdayafter having nothing updated for almost 2
weeks!
On Friday, 12 March 2021 at 13:06:27 UTC+13 monmul wrote:
> So, if it is the RPi then it is either a sofward corruption on the card
>
Yep fully functional againupdating on the website...WTF!.are these
things sent to us to just test our patience!!
On Friday, 12 March 2021 at 13:30:30 UTC+13 monmul wrote:
> Hmmm! even more curiouserI notice from my webpage that data was
> collected and posted yesterday...
A big THANK YOU to all who helped me out on this, I really appreciate the
help and guidancesorry it turned into a wild goose chase!
On Friday, 12 March 2021 at 16:24:28 UTC+13 monmul wrote:
> Yep fully functional againupdating on the website...WTF!.are these
> things sent to
t; an incompatible Envoy/logger or if there is some other issue with one or
> the other. If your original Envoy just started working again it could just
> as easily stop as well; having a backup would be handy.
>
> Gary
> On Saturday, 13 March 2021 at 10:38:16 UTC+10 monmul wrote:
&g
I have weewx running, very happily and very successfully, (thanks to all
here who helped me!) on a Rpi3B. The Pi is running Raspian and the standard
SD card. Now, I got to thinking that this is probably not the most secure
long tern setup - due to wear and tear on the SD card etc. So, I was
thi
Thank you for that Wes, very interesting, I had not come across that
particular solution before!
On Wednesday, 8 April 2020 04:38:39 UTC+12, Wes Witt wrote:
>
> for usb boot i recommend using an MSATA drive. 100% reliable, easy to
> install. i'm using the following products:
>
> https://www.ama
UTC-7, monmul wrote:
>>
>> I have weewx running, very happily and very successfully, (thanks to all
>> here who helped me!) on a Rpi3B. The Pi is running Raspian and the standard
>> SD card. Now, I got to thinking that this is probably not the most secure
>> long tern se
OK! Thank you for that!
On Thursday, 9 April 2020 04:21:13 UTC+12, Rob Cranfill wrote:
>
> monmul,
>
> I’ll go ahead and answer your question even though I have nothing of great
> value to add, because I happen to have done exactly this about 2 weeks ago.
>
> Yes, you
I am not sure if this is the right place to post this help request...please
direct me elsewhere if not. I am new to weewx and am trying to set it up on
my Rpi 3. I have a Davis Vantage weather station. I have a serial Envoy
data logger attaced to my Rpi with a serial/usb converter. In following
r weewx.conf ie:
>
> $ sudo weewxd /etc/weewx/weewx.conf
>
> Gary
>
> PS. Would be appreciated if you started a new thread for new issues,
> having multiple issues throughout one thread is confusing for everybody.
>
> On Sunday, 6 January 2019 11:06:32 UTC+10, monmul wrote
I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
Vantage weather station. I have a serial Envoy data logger attaced to my
Rpi with a serial/usb converter. In following the set up instructions, I
get these errors!
sudo weewxd weewx.conf
Traceback (most recent call last):
ict['Station'])
File "/usr/share/weewx/weewx/station.py", line 49, in __init__
self.latitude_f = float(stn_dict['latitude'])
ValueError: invalid literal for float(): -45.060031 168.566948
pi@Weatherpi:/ $
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote
Sorry my errorthe latitude and longitude were formatted incorrectly in
the config file.works now!
On Sunday, 6 January 2019 16:25:56 UTC+13, monmul wrote:
>
> OK, with the correct path!still no joy!
>
>
> pi@Weatherpi:/ $ sudo weewxd /etc/weewx/weewx.conf
> Trac
ndrew Milner wrote:
>
> what have you set latitude and longitude to in weewx.conf?? The error
> implies latitude is wrongly set
>
>
>
> On Sunday, 6 January 2019 05:25:56 UTC+2, monmul wrote:
>>
>> OK, with the correct path!still no joy!
>>
>>
>
Great! I have managed to get my information through to Weather Underground!
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a serial Envoy data logger attaced to my
&
: 154670292
On Sunday, 6 January 2019 16:56:39 UTC+13, monmul wrote:
>
> Great! I have managed to get my information through to Weather Underground!
>
> On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>>
>> I am new to weewx and am trying to set it up on my Rpi 3. I
January 2019 17:08:51 UTC+13, gjr80 wrote:
>
> Depends, are loop and archive records being properly (and regularly)
> received/created ? If so it is fine, if not then we look deepre.
>
> Gary
>
> On Sunday, 6 January 2019 14:04:26 UTC+10, monmul wrote:
>>
>> Is
:20 Weatherpi avahi-daemon[468]: New relevant interface
eth0.IPv6 for mDNS.
On Sunday, 6 January 2019 17:52:24 UTC+13, gjr80 wrote:
>
> On Sunday, 6 January 2019 14:20:09 UTC+10, monmul wrote:
>>
>> Hmmm! I would have to pass on that oneI am not sure I even know what
>
Is there a ¨How To¨ for setting up the NTP on the RPi?
On Sunday, 6 January 2019 18:39:44 UTC+13, monmul wrote:
>
> This is all I could find on the syslogno errors given so I will ignore
> the LOOP etc
>
> Jan 6 18:25:20 Weatherpi weewx[831]: engine: Loading stati
e here
>
> On Saturday, January 5, 2019 at 10:43:45 PM UTC-8, monmul wrote:
>>
>> Yes it does!
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails fro
Duh! thanks Gary!
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a serial Envoy data logger attaced to my
> Rpi with a serial/usb converter. In followin
: [ 4432.550891] usb 1-1: USB disconnect,
device number 58
Jan 7 15:04:24 Weatherpi kernel: [ 4432.750745] Indeed it is in host mode
hprt0 = 00021501
Jan 7 15:04:24 Weatherpi kernel: [ 4432.950736] usb 1-1: new high-speed
USB device number 59 using dwc_otg
On Sunday, 6 January 2019 14:37:
Ah! there seems to be a power problem with my WiFi dongle! I will try it
headless and on the LAN.
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a serial Envoy da
Ah! there seems to be a power problem with my WiF
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a serial Envoy data logger attaced to my
> Rpi with a serial/u
ected...ad
Jan 07 18:51:32 Weatherpi weewx[786]: vantage: LOOP try #2; error:
Expected...ad
Hint: Some lines were ellipsized, use -l to show in full.
pi@Weatherpi:~ $
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3
-07
15:0...b'
Jan 07 18:38:01 Weatherpi weewx[800]: manager: Added record 2019-01-07
15:1...b'
Jan 07 18:38:01 Weatherpi weewx[800]: manager: Added record 2019-01-07
15:1...b'
Hint: Some lines were ellipsized, use -l to show in full.
pi@Weatherpi:~ $
On Sunday, 6 January 2019 1
et you know how it goes.
>
> Gary
>
> On Monday, 7 January 2019 15:54:22 UTC+10, monmul wrote:
>>
>> This is what I get headless and with the LAN as opposed to the wifi
>> dongle!
>>
>> pi@Weatherpi:~ $ sudo systemctl status weewx
>> ● weewx.service
Ooops! one more thing.how do I do a wind offset? I cannot see it in the
config file?!
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a serial Envoy data logger a
legroups.com > *On Behalf Of *monmul
> *Sent:* Monday, January 7, 2019 12:18 AM
> *To:* weewx-user >
> *Subject:* [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and
> running
>
>
>
> Yes, thank you Gary for your help..it is very much my problem an
ies (4) exceeded.
Jan 8 11:07:33 Weatherpi weewx[750]: engine: Caught WeeWxIOError: Max
tries exceeded while getting LOOP data.
Jan 8 11:07:33 Weatherpi weewx[750]: Waiting 60 seconds then
retrying...
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to we
sure you read through the
> Vantage wee_device notes first, make sure you stop weeWX before using
> wee_device (only one thing can talk to the console at once) and check the
> setting afterwards with wee_device --info
>
> Gary
>
> On Monday, 7 January 2019 16:22:40 UTC+10,
Great, thanks, it seems to be working ok now.and I will just stick with
the 600 sec.
On Tuesday, 8 January 2019 19:18:12 UTC+13, gjr80 wrote:
>
>
> On Tuesday, 8 January 2019 08:14:28 UTC+10, monmul wrote:
>>
>> I notice an error in the archival interval - see bel
al = 300 to archive_interval = 600 under [StdArchive]
> in weewx.conf and you should not see that message again.
>
> Gary
>
> On Tuesday, 8 January 2019 16:24:17 UTC+10, monmul wrote:
>>
>> Great, thanks, it seems to be working ok now.and I will just stick
>> with th
As usual, Gary, spot on.all working nicely again now!.Thank you so
much I really appreciate your help an advice.
On Saturday, 12 January 2019 14:03:17 UTC+13, gjr80 wrote:
>
> On Saturday, 12 January 2019 07:12:04 UTC+10, monmul wrote:
>>
>> weewx.UnitError: Unit
or so? Thanks in advance.you guys have been fabulous in
helping a newbie!
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a serial Envoy data logger attaced to my
&
of the day it will likely depend on your
> setup.
>
> You have started on the slippery slope of customising your weeWX install,
> the process can appear daunting but do persist and feel free to continue to
> ask if not sure.
>
> Gary
>
> On Sunday, 13 January 2019 11:25:
uot;, line 1680, in open
raise ReadError("file could not be opened successfully")
tarfile.ReadError: file could not be opened successfully
On Sunday, 13 January 2019 17:15:11 UTC+13, monmul wrote:
>
> WOW! thank you so much, Gary, for the pointers.I will get on to tha
I am searching for how to turn off showing the "internal temperature" graph
but cannot see a anything in skin.conf or in weewx.conf.what am I
missing?
On Sunday, 13 January 2019 17:15:11 UTC+13, monmul wrote:
>
> WOW! thank you so much, Gary, for the pointers.I wil
wrote:
>
> Look towards the bottom of the index.html.temp file in the skins/standard
> directory. You will see .
> Comment out this line.
>
>
>
> Tom
>
>
>
> *From:* weewx...@googlegroups.com > *On Behalf Of *monmul
> *Sent:* Sunday, January 13, 20
OK, got the jpg after the ISS signal working it seemsnot sure how!
On Monday, 14 January 2019 11:40:45 UTC+13, monmul wrote:
>
> Thanks Tom, got that now!my jpg is appearing before and not after
> the ISS signal quality..I cannot find a ref to the signal quality in
&g
mage to your web server if you wish. There are many
> different ways to achieve this, I have outlined one and I am sure other
> will have other ways. At the end of the day it will likely depend on your
> setup.
>
> You have started on the slippery slope of customising your weeWX
I presume that $rainyear.rain.sum will become $rainalltime.rain.sum?
On Monday, 14 January 2019 22:21:01 UTC+13, monmul wrote:
>
> In installing xstats manually, the read_me suggests the following for step
> 1:
>
> cp bin/user/xstats.py /home/weewx/bin/user
>
> I can fi
OK, thanks Garythe xstats.py is already in that directory i.e.
/usr/share/weewx/user.
On Monday, 14 January 2019 22:40:17 UTC+13, gjr80 wrote:
>
> Hi,
>
> The location of the different weeWX components depends on how you
> installed weeWX. Have a look at Where to find things (
> http://www
OK thanks, I am trying to get the total rain over the calendar
year..and show the maximum year of the series.
On Monday, 14 January 2019 22:55:31 UTC+13, gjr80 wrote:
>
> Um, no. $rainyear is a special version of $year. $year gives stats from
> midnight at the start of 1 January of the curre
No, I only want a number for the full calendar year Jan 1 to Dec 31for
the data that I havethen I want to find the maximum value in that
series. I am not interested in a running total. Sorry, I did not make
myself very clear. Very basic, old fashioned, total rain in each calendar
year.
.format("%Y")
> #else
> No rainfall data available
> #end if
>
> to display something like:
>
> Maximum annual rainfall was 1326.4 mm in 2015
>
>
> The code between the #else and #end if is there to catch the case where
> there may have been no rainfall
ation and
> this summary data is stored on a per day basis. Hence it is very easy to
> get the wettest day, unfortunately weeWX does not record summary data on a
> year (or month or week) basis so finding the wettest year, month or week
> requires a bit of code.
>
> Gary
>
So, here is my first attempt at putting all the advice together into the
all time template..how am I doing?
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a ser
to try it. You will need to fix the missing # and maxsumm typo
> but otherwise it should work. But how it looks and does it display what you
> want will be another thing completely :)
>
> Gary
>
> On Tuesday, 15 January 2019 14:54:43 UTC+10, monmul wrote:
>>
>> So, h
or] section
> <http://weewx.com/docs/customizing.htm#[CheetahGenerator]> of the
> Customization Guide.
>
> Gary
>
> On Wednesday, 16 January 2019 05:57:22 UTC+10, monmul wrote:
>>
>> Thank you again Gary,...now after I have made these changeshow do I
>>
[[[RSS]]]
template = RSS/weewx_rss.xml.tmpl
[[[Mobile]]]
template = mobile.html.tmpl
On Wednesday, 16 January 2019 19:21:04 UTC+13, monmul wrote:
>
> So, here is what happenedthe report got ignored!!
>
> i@raspberrypi:~ $ sudo tail -f /var/log/syslog
&g
data
On Wednesday, 16 January 2019 20:35:42 UTC+13, monmul wrote:
>
> H.I thought the error was in skin.confbut you think it might
> be in weewx.conf.
>
> On Wed, Jan 16, 2019 at 8:04 PM gjr80 wrote:
>
>> Jan 16 19:17:34 raspberrypi weewx[530]: repo
AwesomeI thought that weeimport could only deal with csv files and so
went and converted them allbut kept the txt files for backup!
On Thursday, 17 January 2019 22:35:30 UTC+13, gjr80 wrote:
>
> Ok, that explains the csv file you provided having a different name
> structure to what I had
icial" readings. Is this the case? Is there a way I can get the live
gust speed?
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a serial Envoy data logger attaced
14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a serial Envoy data logger attaced to my
> Rpi with a serial/usb converter. In following the set up instructions, I
> get these errors!
>
Is there a way to see whether the data is getting through from the Vantage
to weewx, my Rpi has not undated the skins or WU since last night. I have
tested all connectionsthere seems to be ftp happeningbut nothing
gets updated!!
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote
5.78 seconds
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
> Vantage weather station. I have a serial Envoy data logger attaced to my
> Rpi with a serial/usb converter. In following the set u
Voltage normalised
(0x)
Jan 26 11:18:29 raspberrypi kernel: [ 1137.766503] Under-voltage detected!
(0x00050005)
Jan 26 11:18:35 raspberrypi kernel: [ 1144.006449] Voltage normalised
(0x)
On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>
> I am new to weewx and am tr
1 - 100 of 149 matches
Mail list logo
