just to be clear, if you want to capture data from a weather station that is
sending data to weather underground, then you might want to start with 'sniff
mode for any WU client' section:
===
Example: sniff mode for any
Have you looked at making your CS CR1000 write a file that FileParser
will recognize and use that to input to WeeWx? That has been one
suggestion.
I have not worked on a similar project to modify FileParser to be 'less
robust' and just taking a strictly ordered file and stuffing those
va
> On Apr 8, 2025, at 07:30, Steve Shuff wrote:
>
> Hi All,
> I am making an attempt to get Weewx to communicate with my Campbell
> Scientific CR1000 based weather station.
> I have the station successfully uploading to WeatherUnderground and I would
> like to configure the interceptor driver
Hi Matthew ,
Thanks for the reply.
The CR1000 based station is on the home local network , the Raspberry pi
running Weewx is on the same network.
Assuming the interceptor is expecting to use two network interfaces I
would have to remove the CR1000 from the home network and plug it into the
Raspb
Also the Raspberry pi is on a wireless connection to the network,
Thanks
On Tue, Apr 8, 2025 at 2:37 PM Steve Shuff wrote:
> Hi Matthew ,
> Thanks for the reply.
>
> The CR1000 based station is on the home local network , the Raspberry pi
> running Weewx is on the same network.
> Assuming the
