Re: [weewx-user] Belchertown skin not linked to nginx

Hi, I suggest as a start you edit weewx.conf, set debug=1, save weewx.conf and the restart WeeWX. Let WeeWX run for at least two report cycles and then post a log extract here showing the entire WeeWX startup and the two report cycles. Then we can see what WeeWX and the skins are doing. Gary

Re: [weewx-user] New weather station UK

Which driver would this use? And sorry I have no idea what HP2551 and Ecowitt are about. On Sunday, 7 March 2021 at 13:50:43 UTC nav...@gmail.com wrote: > > Have a look at this setup available in the UK: > https://www.nevadaradio.co.uk/product/watson-w-8686/ > > Works well, and supports extra

[weewx-user] Re: Translation

Difficult to answer with that screenshot, only. You may want to look into skin.conf or weewx.conf for "meters" and replace it by "metri". ginfo...@gmail.com schrieb am Montag, 8. März 2021 um 08:43:34 UTC+1: > Sorry, “meters” to “metri” , in Italian > Thanks > > Il giorno sabato 6 marzo 2021 a

Re: [weewx-user] New weather station UK

Ecowitt is the trading arm of Fine Offset and the Watson W8686 appears to be a rebadged/clone of their HP2551. I used Weewx Interceptor in Ecowitt mode to receive the information from the unit:-https://github.com/matthewwall/weewx-interceptor which worked well. On Monday, 8 March 2021 at 08:31:

Re: [weewx-user] New weather station UK

Hmmm I wonder if this will work? Looks like a FineOffset WS2085 clone, same enough as a WS2083? Aercus Instruments WS2085 Wireless Weather Station with USB Upload + Free Beginner's Guide (eBook): Amazon.co.uk: Kitchen & Home

Re: [weewx-user] New weather station UK

Sorry, I can't offer any advice on that system. For a bit more money you can get a unit which is known to work with Weewx, offers a better display and is compatible with the latest sensors. On Monday, 8 March 2021 at 10:04:19 UTC Auchtermuchty Weather wrote: > > Hmmm I wonder if this will

[weewx-user] Re: Translation

I solved!! I put this line: meter = " metro", " metri" on weewx.conf on section "labels" Thanks!! Il giorno lunedì 8 marzo 2021 alle 10:42:45 UTC+1 kk44...@gmail.com ha scritto: > Difficult to answer with that screenshot, only. > > You may want to look into skin.conf or weewx.conf for "m

Re: [weewx-user] New weather station UK

At some point these newer clones with the newer sensors are going to have to be tried. A lot of Googling using the makes mentioned in the documentation failed to reveal any clones of the older stations - they were all 'unavailable'. Whether I am the person to do that is a different question!

[weewx-user] Tiny letters despite font being installed

My skin uses FreeMonoBold.ttf: skins/Images/skin.conf:top_label_font_path = /usr/share/fonts/truetype/freefont/FreeMonoBold.ttf skins/Images/skin.conf:unit_label_font_path = /usr/share/fonts/truetype/freefont/FreeMonoBold.ttf skins/Images/skin.conf:bottom_label_font_path = /usr/shar

Re: [weewx-user] New weather station UK

CCL Electronics is another company that makes Weather stations that are sold as rebadged clones by the likes of Bresser, Youshiko, Garni, Ventus, Logia and probably others. The WS6in1 driver for weewx supports these that are connected to the PC connected console. The WiFi versions of these are

Re: [weewx-user] New weather station UK

Newer Fine Offset clones from the various resellers have all been tested. I recommend that you reference this product matrix to learn what works with what. https://www.wxforum.net/index.php?topic=40730.0 My recommendation between the Fine Offset clones and the CCL and UCTECH clones is to stick

Re: [weewx-user] New weather station UK

Oh and I forgot to mention that you can get the GW1000 from Ecowitt if the FO Clone brand of the station and display do not offer it. It will work as long as the frequency is the same. Your choices of frequency are 433, 868, and 915 MHz. For example if you buy the Watson and they don't offer th

Re: [weewx-user] Which Raspberry Pi to use? Will more memory help at all?

I think the Pi with 4 GB RAM makes the most sense. You never know what else you may want to throw at that Pi to do simultaneously with WeeWX. Maybe you want to run Cumulus MX at the same time. Or maybe something better comes along now that the Pi 4 B has been around for almost 2 years. Then if y

[weewx-user] anyone using Wet Bulb Temperature ?

I just set up a station at a Ski Area - we would also like to display "wet bulb" temperature we are using a Davis Vantage Pro 2. Has anyone done this ? all help is appreachated. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe fro

Re: [weewx-user] Belchertown skin not linked to nginx

I've been running debug since the beginning! Attached is a text file with 200 line extract of syslog, 100 lines of "/var/log/debug", 100 lines of "/var/log/messages"; next is a copy of my weewx.conf. Let me know if you'd like to have skin.conf and graphs.conf. /David On Monday, March 8, 2021

[weewx-user] Installing Weewx on a Raspberry Pi with a Weatherlink Live

folks, complete newbie here and wondering if anyone's put together a step-by-step for installing weewx on a raspberry pi (4B) to speak to a Davis Weatherlink Live. I see a lot of threads and working out of problems, but I'm wondering if anyone's done a soup-to-nuts explainer, including weatherl

[weewx-user] Re: Installing Weewx on a Raspberry Pi with a Weatherlink Live

There is no step by step installation instruction that I am aware of for weewx with the weather link live extension. I installed weewx for my Davis Vantage Vue and Weather Link Live by following the directions given by weewx and by the maker of the Weather Link Live extension that I used. It's

[weewx-user] Re: Installing Weewx on a Raspberry Pi with a Weatherlink Live

It really is just a two step process; first install WeeWX and make sure it is working error free with the simulator and second install the Weather Link Live driver of your choice. The WeeWX install instructions should be pretty clear and are well trod. There are five Weather Link Live drivers l

Re: [weewx-user] Belchertown skin not linked to nginx

David, Looking at a generated web page is looking at the end product, there are a whole pile of intermediate steps before you get there. Best to work through from the beginning to locate where the issue is. >From your log extract it appears that your system is obtaining data from your station,

Re: [weewx-user] Re: Cydia pomonella

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thu, 17 May 2018 14:35:58 +1000 Glenn McKechnie wrote: > There is no link to the actual file. It can be inferred from > reading your notes, and you do mention that it's in the software > extension installation instructions but a link to the actua

[weewx-user] Re: Installing Weewx on a Raspberry Pi with a Weatherlink Live

Thank you both. I’m sure I’ll be back. Appreciate it. On Monday, March 8, 2021 at 8:37:29 PM UTC-5 gjr80 wrote: > It really is just a two step process; first install WeeWX and make sure it > is working error free with the simulator and second install the Weather > Link Live driver of your choic

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Is this telling me that my "old" Envoy is indeed broken? pi@WeatherPi:~ $ wee_device --clear-memory Using configuration file /etc/weewx/weewx.conf Using Vantage driver version 3.2.1 (weewx.drivers.vantage) Unable to wake up console... sleeping Unable to wake up console... retrying Traceback (most

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Possibly, but if you are using the same RPi with the same cable as you have used with your new unresponsive Envoy then perhaps the issue is with the RPi or the cable. I would be looking for another RPi or PC (Windows (ugh), Mac or whatever) and run a terminal window/program and do the basic con

Re: [weewx-user] Belchertown skin not linked to nginx

Gary: no joy. changed weewx.conf to show Belchertown HTML_ROOT as you suggested ("/home/weewx/public_html/weewx/belchertown"), stopped weewx, started weewx, ran weewx status. waited for updates, browsed to http://192.168.86.28/weewx and got the original weewx skin with correct info. Then browse

Re: [weewx-user] Belchertown skin not linked to nginx

OK. Let's forget about the browser for the time being and work with the files in /home/weewx/public_html, get them right and the browser will fall into place. Since you have made various changes to where WeeWX generated files are going, but seem to have that set correctly now, go ahead and dele

[weewx-user] Re: Tiny letters despite font being installed

Currently it looks OK to me... Auchtermuchty Weather schrieb am Montag, 8. März 2021 um 18:56:14 UTC+1: > My skin uses FreeMonoBold.ttf: > > skins/Images/skin.conf:top_label_font_path = > /usr/share/fonts/truetype/freefont/FreeMonoBold.ttf > skins/Images/skin.conf:unit_label_font_path =

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Hmmm! the only spare RPI I have at the moment is a 3A+ is that likely to have enough grunt to do the job? Oh! do you mean I could attach the "new" Envoy to a PC (running Ubuntu) and do the connectivity test? On Tuesday, 9 March 2021 at 18:47:15 UTC+13 gjr80 wrote: > Possibly, but if you are us

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Anything will do, no grunt needed, all you need is a terminal program of some sort, minicom will do the job on anything Linux. Windows used to come with some sort of terminal program. Not sure about a Mac. Certainly no need to install WeeWX, you just want to run the connectivity test with your

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Cool, thanks, will get on that with my laptop in the next day or sothank you! On Tuesday, 9 March 2021 at 19:37:16 UTC+13 gjr80 wrote: > Anything will do, no grunt needed, all you need is a terminal program of > some sort, minicom will do the job on anything Linux. Windows used to come > w

Re: [weewx-user] Which Raspberry Pi to use? Will more memory help at all?

It depends. If you are using the PI as a "one for all" device for, weewx, home automation, media server, run several other services the pi4 with enough RAM makes sense. Otherwise I'd choose the PI with the least energy consumption. Running a PI4 24/7/365 for nothing more than weewx is wasting r

[weewx-user] Re: Tiny letters despite font being installed

This is what your page looks like after you open it. Everything OK [image: Screenshot 2021-03-09 085408.png] But I still have one question: How did you integrate the tabular weather data: "Current Weather", "Last 24 hours" etc.? Are the live data also included there? -- You received this