l skins etc.
Op donderdag 10 juli 2025 om 21:24:37 UTC+2 schreef Anton
vanNwnhzn@GMail:
Digging deeper, (blankly) observe that reading
Weatherflow_Tempest and output towards CWOP, HWA, Weathercloud
and WUnderground still running without problems.
Reason
Digging deeper, (blankly) observe that reading Weatherflow_Tempest and
output towards CWOP, HWA, Weathercloud and WUnderground still running
without problems.
Reason to keep alive, and study what is still (re)usable.
Op 10-7-2025 om 19:50 schreef vince:
If you can do so, imaging a new SD card a
Jacques,
Agreed that we should not use different nomenclature than WMO (because
it will only increase confusion),
but trying to reduce ambiguity is always useful.
Op 7-5-2024 om 13:06 schreef Jacques Terrettaz:
Yes, correct understanding !
The term "sunshine" and "sunshine duration" is the o
WMO (World Meteorological Organization ) defines sunshine-duration as
the accumulating time each day that direct sunshine-radiation exceeds a
level of 120 W/m2
That definition is simple enough, and many PWSes calculate along that
setup, but 'devil is in the details'.
Perhaps puristic approach, b
Based on my experience with naval equipment, real watertightness has a
high price.
As alternative, the more ventilation, the better:
just try to prevent that drops, dust and insects may enter the box.
The protecting box when able to 'breath' probably can get rid of
condensation.
That said, you
Can the 'faulty' values be traced back to values in the input-files from
either WU, or from AWEKAS?
If that is the case, it looks like a doubtful data source.
If no link visible, (/perhaps open door/) have a look in completely
different direction:
did you properly set the type of PWS (_not_ to
Please describe what you mean with
unfortunately the data is displayed incorrectly
Is scaling fitting the units listed in the API-description?
Be aware that
epoch-times are related to a specific timezone, with an offset relative
to UTC as given under 'timeoffset'.
Anton
--
You received this
Thanks!
Confirms my view on the matter related to WeeWx.
Further confirmed by effort last night from Weatherflow under their
'remote control':
- looking at the status reports from Weatherflow apparently repeated
resets from their side
- such resets resulted in short sequences with 'realisti
Vince,
Nothing changed in the network.
Therefore have to assume that this defect is 'own initiative' of the
Tempest-hub.
Sure, hints in
https://help.weatherflow.com/hc/en-us/articles/360050786593-Troubleshooting-Guide-Setup-WiFi-Hub-Tempest-Device-
The simple remdy of reboot of hub, router an
Some 24 hours ago I observed a 'freezing' of the WeeWX-picture at
https://vannwnhzn.nl/WeeWX0/index.html
Still continues.
First thought is that upload for the html-file has stopped.
Because for upload using the FTP-function in WeeWX, implicitly it means
that WeeWX has to be checked.
Observation
Yesterday (and day before) had impression that*/my /*calls-for-data were
blocked due to exceeding the allowed quotum/rate, but reading these
messages might be another, internal WU-problem.
Op 7-2-2022 om 11:36 schreef Nate Bargmann:
Looks like the site continues to be up and down since last ni
If I look at the sensor-map you inserted in weaterheflowudp.py for your
Tempest, I see codes like AR-8830 and SK-8830
In my opinion there is the error, causing time-out.
The required sensor-code you find by going to the Weatherflow-webpage
showing the info from your Tempest-station:
easi
Addition to description of *Sequence1*.
Once weewx has been started, at Putty's CLI appears the expected stream
of print-out.
At the keyboard break that stream ends with an error report.
Perhaps that error report also provides some relevant info?
See below the last printout from the loop and th
Is the info on this url of any use?
https://www.baranidesign.com/meteohelix-message-decoder
Seems example set of payload-decoder.
if somebody could develop a frontend for weewx, you are able to make
direct connection between TTN and WeeWX and/or between SigFox and WeeWX,
without use of FTP etc.
For clear-sky reference values you could look at https://www.openuv.io/
That site provides info dedicated for the location you ask:
info includes much more than UVI only.
For automatic extraction of info a script will be needed.
If you want automatic info on attenuation by clouds, then
https://w
An open source for getting UV-values calculated for your location is at
https://www.openuv.io/
*Be aware* that the outputdata is for 'clear-sky':
for a cloudy or rainy day the value must be recalculated by yourself ...
But at least you get good reference/ceiling-values for the bright days.
A
Crossing communications:
Stefan's response is clear (and closing)
Op 28-12-2020 om 12:33 schreef Anton vanNwnhzn@GMail:
This message in the forums Domoticz/Stackoverflow explains why ftplib
is not suitable:
https://www.domoticz.com/forum/viewtopic.php?p=259314#p259314
Have myself tri
This message in the forums Domoticz/Stackoverflow explains why ftplib is
not suitable for sftp:
https://www.domoticz.com/forum/viewtopic.php?p=259314#p259314
As explained in the Domoticz-thread myself also looking for an 'easy'
alternative.
Tried paramiko-variants like pysftp, and also rsync.
T
'End of 2021' seems ample time to find an alternative solution for the API.
Op 8-4-2020 om 3:12 schreef Xant:
To note, this is not an "usual" social forum (profanity not allowed).
All constructive and educated points are welcome, in benefit of the
whole WX developers and enthusiasts.
DarkSk
Another entry for comparison:
https://www.wxsim.com/accu.htm
Op 29-2-2020 om 22:17 schreef vince:
On Saturday, February 29, 2020 at 12:09:13 PM UTC-8, p q wrote:
In a word, microclimates.
I'm using NWS now. It's good, but I found that WU was more
accurate. Summer high/lows were cl
20 matches
Mail list logo
