omment or suggestions you
might have.
Regards,
Masaharu Inoue
From: Shwetha Bhandari (shwethab) [mailto:shwet...@cisco.com]
Sent: Tuesday, July 10, 2018 7:08 PM
To: 井上 勝晴 ; vpp-dev@lists.fd.io
Cc: HADI SHAIKHZAKER
Subject: Re: [vpp-dev] about iOAM configuration
IOAM trace timestamp is 4 by
om: Shwetha Bhandari (shwethab) [mailto:shwet...@cisco.com]
Sent: Thursday, July 05, 2018 1:23 PM
To: HADI SHAIKHZAKER ; vpp-dev@lists.fd.io
Cc: 井上 勝晴
Subject: Re: [vpp-dev] about iOAM configuration
Hi Hadi,
Good to know!
Classification is needed for encap and decap not for transit processing.
Tr
was not the oldest one.
I'd greatly appreciate any comment or suggestions you might have.
Regards,
Masaharu Inoue
From: Shwetha Bhandari (shwethab) [mailto:shwet...@cisco.com]
Sent: Thursday, July 05, 2018 1:23 PM
To: HADI SHAIKHZAKER ; vpp-dev@lists.
: Thursday, July 05, 2018 9:48 AM
To: HADI SHAIKHZAKER ; vpp-dev@lists.fd.io
Cc: 井上 勝晴
Subject: Re: [vpp-dev] about iOAM configuration
Hi Hadi,
> set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1 node-id 0x1
> app-data 0x1234
To setup the node id and app-data that is needed on trans
From: HADI SHAIKHZAKER
Sent: Thursday, July 05, 2018 10:01 AM
To: 'Shwetha Bhandari (shwethab)' ; vpp-dev@lists.fd.io
Cc: 井上 勝晴
Subject: RE: [vpp-dev] about iOAM configuration
Thanks Shewtha！
I am going to check the lxc setup.
https://github.com/CiscoDevNet/iOAM/tree/master/scripts/v
AM
To: Shwetha bhandari , "vpp-dev@lists.fd.io"
Cc: 井上 勝晴
Subject: RE: [vpp-dev] about iOAM configuration
Just updating.
Configuration in the LXC setup works fine.
Now all the three nodes (encap, transit and decap) works fine.
[0] ttl 0x3e node id 0x3 ts 0x1b0364ae
[1] ttl 0x
xample/simple-ip6
The scripts bring up lxc setup with 3 VPPs for encap, transit, decap along with
the necessary configs.
Thanks,
Shwetha
From: on behalf of HADI SHAIKHZAKER
Date: Tuesday, July 3, 2018 at 1:21 PM
To: "vpp-dev@lists.fd.io"
Cc: 井上 勝晴
Subject: [vpp-dev] about iOAM config
Hi vpp-dev team,
I am trying to check the iOAM feature of VPP.
Do you have any working config sample for this?
I have checked the following url's and the configuration mentioned, was
sometimes rejected by the CLI or had no effect.
[URL1] https://docs.fd.io/vpp/18.04/ioam_plugin_doc.html
[
