Hi Xyxue,
I plan to get it committed into master, and so released in the next cycle;
17.10.
Regards,
neale
From: 薛欣颖
Date: Wednesday, 28 June 2017 at 02:06
To: "Neale Ranns (nranns)" , vpp-dev
Subject: Re: Re: VPLS VPWS problem
Hi Neale,
About https://gerrit.fd.io/r/#/c/6861/. What will yo
Hi Neale,
About https://gerrit.fd.io/r/#/c/6861/. What will you do with it later?
Thanks,
Xyxue
From: xyxue
Date: 2017-06-26 19:32
To: nranns; vpp-dev
Subject: Re: Re: VPLS VPWS problem
Hi Neale,
I got the code of master branch. It's a bit different from the patch you
uploaded earlier.
Doe
Hi Neale,
I got the code of master branch. It's a bit different from the patch you
uploaded earlier.
Does the code of master branch support VPWS and VPLS?
Thanks,
Xyxue
From: Neale Ranns (nranns)
Date: 2017-05-31 21:02
To: 薛欣颖; vpp-dev
Subject: Re: VPLS VPWS problem
Hi Xyxue,
Works for me
Hi Xyxue,
Works for me with:
DBGvpp# sh ver
vpp v17.07-rc0~312-g2062ca5 built by vagrant on localhost at Wed May 31
03:29:47 PDT 2017
configs and setup attached.
Regards,
neale
From: 薛欣颖
Date: Wednesday, 31 May 2017 at 10:08
To: "Neale Ranns (nranns)" , vpp-dev
Subject: VPLS VPWS problem
Hi
Hi Neale,
We tested VPLS and VPWS ,the result :In VPLS the flow was dropped in L2.
In VPWS unable to send and receive messages continuously.Sometimes there is no
flow receive/send.
MPLS L2VPN VPLS
The configuration and trace is shown below:
PE1
crea
Hi Xyxue,
As you say, probably also:
https://gerrit.fd.io/r/#/c/6883/
thanks,
neale
From: 薛欣颖
Date: Friday, 26 May 2017 at 12:16
To: "Neale Ranns (nranns)" , vpp-dev
Subject: Re: Re: [vpp-dev] VPLS VPWS
Hi neale,
My configuration and result is shown b
Hi neale,
My configuration and result is shown below:
VPWS:
PE1
create host-interface name eth0
create host-interface name eth1
set int state host-eth1 up
set int state host-eth0 up
set interface mac address host-eth0 00:03:7F:FF:FF:FF
set interface mac add
Hi Xyxue,
Yes, I think that looks good.
To do VPLS add the mpls-tunnel and [many] host-eth to a bridge-domain, rather
than a x-connect.
Regards,
neale
From: 薛欣颖
Date: Friday, 26 May 2017 at 09:00
To: "Neale Ranns (nranns)" , vpp-dev
Subject: Re: Re: [vpp-dev] VPLS VPWS
Hi nea
mpls-tunnel0
mpls local-label add non-eos 34 mpls-lookup-in-table 0
In addtion,how to configure VPLS?
Thanks,
xyxue
From: Neale Ranns (nranns)
Date: 2017-05-25 00:32
To: 薛欣颖; vpp-dev
Subject: Re: [vpp-dev] VPLS VPWS
Hi Xyxue,
VPP does not support VP{WL]S.
However, I’ve made a patch to enable
:24
To: vpp-dev
Subject: [vpp-dev] VPLS VPWS
Hi guys,
Does VPP support VPWS 、VPLS? How should it be configured？Does my configuration
below implement VPWS?
PE1
create host-interface name eth0
create host-interface name eth1
set int state host-eth1 up
set int state host-eth0 up
set interface
Hi guys,
Does VPP support VPWS 、VPLS? How should it be configured？Does my configuration
below implement VPWS?
PE1
create host-interface name eth0
create host-interface name eth1
set int state host-eth1 up
set int state host-eth0 up
set interface ip table host-eth0 0
set int ip address ho
11 matches
Mail list logo
