p-dev@lists.fd.io" , "Neale Ranns (nranns)"
Subject: Re: [vpp-dev] #vpp vpls configuration
Thanks for reply. I change my configuration vpls based on topolgy.
VPLS configuration: MPLS L2VPN VPLS
VPP1-VM1
set int state eth1 up set int s
https://wiki.fd.io/view/VPP/Command-line_Interface_(CLI)_Guide#packet_tracer
/neale
From: Omid Zeinalpour
Date: Tuesday, 1 May 2018 at 08:49
To: "vpp-dev@lists.fd.io" , "Neale Ranns (nranns)"
Subject: Re: [vpp-dev] #vpp vpls configuration
Thanks for reply. I change m
uot;
Cc: "vpp-dev@lists.fd.io"
Subject: [vpp-dev] #vpp vpls configuration
Hi, my configurtion vpls is based on toplogy.
VPLS configuration: MPLS L2VPN VPLS
VPP1-VM1
set int state eth1 up set int state eth0 up set int ip address
;vpp-dev@lists.fd.io"
Cc: "vpp-dev@lists.fd.io"
Subject: [vpp-dev] #vpp vpls configuration
[cid:image001.jpg@01D3E09D.D0514270]
Hi, my configurtion vpls is based on toplogy.
VPLS configuration:
MPLS L2VPN VPLS
VPP1-VM1
set int s
Hi, my configurtion vpls is based on toplogy.
VPLS configuration: MPLS L2VPN VPLS VPP1-VM1
set int state eth1 up set int state eth0 up set int ip address eth1
2.1.1.1/24
mpls tabel add 0 set interface mpls eth1 enable mpls tunnel l2-only via 2.1.1.2
et
t;
Date: Monday, 23 April 2018 at 09:26
To: "vpp-dev@lists.fd.io"
Cc: "vpp-dev@lists.fd.io"
Subject: [vpp-dev] #vpp vpls configuration
Hi, I configure vpls with following commands:
VPLS configuration:
MPLS L2VPN VPLS
PE1
1.create
Hi, I configure vpls with following commands:
VPLS configuration: MPLS L2VPN VPLS PE1
1.create host-interface name eth0 2.create host-interface name eth1 3.set int
state host-eth1 up 4.set int state host-eth0 up 5.set interface mac address
host-eth0 00:03
