Thanks, is there a plan to surpport 802.3ad?
Regards,
Ewan
ewan
From: John Lo (loj)
Date: 2018-01-04 00:05
To: yug...@telincn.com; otroan
CC: vpp-dev
Subject: RE: [vpp-dev] bond
VPP does support static interface bonding via DPDK link bonding PMD:
http://dpdk.org/doc/guides/prog_guide
Ole,
I found out that there is only one way to do this, write them into the vpp
start-up.conf, but there is no cmd to do such task, am I right?
Regards,
Ewan
ewan
From: Ole Troan
Date: 2018-01-03 17:58
To: yug...@telincn.com
CC: Jim Thompson; lin huang; vpp-dev
Subject: Re: [vpp-dev] bond
Hi Ole,
Yes, I need 802.3ad interface, is there a way to do it?
Regards,
Ewan
ewan yugang
杭州全维技术股份有限公司 北京研发部门
手机：17310665879
Q Q : 185237808
邮箱：yug...@telincn.com
地址：北京市朝阳区望京西路金隅国际G座2305
网站：http://www.telincn.com
From: Ole Troan
Date: 2018-01-03 17:40
To: Jim Thompson
CC: lin huang; yug
HI all,
Does vpp surpport interface bond ? How do I configure them?
Regards,
Ewan
ewan
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
)
at /home/vbras/44/VBRASV100R001/vpp1704/build-data/../src/vlib/main.c:1736
#9 0x77790f23 in thread0 (arg=140737347494560) at /home/vbr
Regards
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
Does vppctl cmd can't show too characters, if we need to, how can I fix it.
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
If I set down one of its interface and set up it, then everything is OK.
Any ideas?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-11-17 12:21
To: vpp-dev
Subject: network loop
Hi all,
My version is 17.04, sometimes there will be a large number of packets
4160b00 in ?? ()
#13 0x7f81f481a92d in vlib_unix_main (argc=, argv=)
at /home/wangzy/VBRASV100R001/vpp1704/build-data/../src/vlib/unix/main.c:606
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.
!= i6mn);
return (i6mn->i6mn_entry);
}
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-11-06 09:17
To: Neale Ranns (nranns); vpp-dev
Subject: Re: Re: [vpp-dev] IPV6 Forwarding error
Hi neale,
I've added a protection on it, but should it be invalid somehow?
Rega
Hi neale,
I've added a protection on it, but should it be invalid somehow?
Regards,
Ewan
yug...@telincn.com
From: Neale Ranns (nranns)
Date: 2017-11-04 23:01
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] IPV6 Forwarding error
Hi Ewan,
I would guess that fib_index0 is in
Hi all,
Here is ipv6 forwarding error, my version is 17.04.
Any idea?
Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault.
mfib_forward_lookup (is_v4=0, frame=0x7fffb8626f00, node=0x7fffb5cffe80,
vm=0x779aa2a0 )
at
/home/wangzy/Desktop/VBRASV100R001/vpp1704/build-data/../src
Hi neale,
Do we need to set ip address on gre interface?
Regards,
Ewan
yug...@telincn.com
From: Neale Ranns (nranns)
Date: 2017-10-24 19:07
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] GRE error on vpp 17.04
Hi Ewan,
I have more positive results;
vagrant@localhost:/vpp$ vppctl
: Misc
Regards,
Ewan
yug...@telincn.com
From: Neale Ranns (nranns)
Date: 2017-10-24 00:06
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] GRE error on vpp 17.04
Hi Ewan,
Are you adding an overlapping sub-net?
Can we see please:
sh int addr
regards,
neale
From: on behalf of &quo
0down
root@test:~# vppctl set int ip address gre0 9.9.9.1/24
exec error: Misc
root@vbras:~#
Regards,
EWAN
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
Why there is no vlan l2 forward, only bridge forward ?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
I have one main core and five worker cores, is there a way to deliver some
specific packets from one core to another?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp
Hi，
When will this be ok, any plan?
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-09-04 13:17
To: yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] snat and fragmented packet
Hi,
NAT plugin currently doesn’t support
Hi all.
Is there a way to cross compile vpp?
How to compile vpp for ubuntu on centos?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi.
It's compiled for x86 target. Would you like to give a shot?
Regards,
Ewan
yug...@telincn.com
From: Pierre Pfister (ppfister)
Date: 2017-09-11 15:24
To: yug...@telincn.com
CC: vpp-dev
Subject: Re: [vpp-dev] Build vpp on openwrt
Hello.
I didn't try it.
But the hardest is proba
Hi,
It's Linux system and It's easy to prune modules in openwrt.
Regards,
Ewan
yug...@telincn.com
From: Guo, Ruijing
Date: 2017-09-11 08:34
To: yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] Build vpp on openwrt
Hi,
I am wondering what usage for vpp on openwrt.
Thanks,
-Ruij
Thanks
yug...@telincn.com
From: Andrew Yourtchenko
Date: 2017-09-06 18:24
To: yug...@telincn.com
CC: vpp-dev
Subject: Re: [vpp-dev] acl priority
Hi,
If we you talk about acl plugin then the ACLs are evaluated in the order of
them applied and same about the ACEs within an acl - to change the
Hi all,
Is there anyone try to build vpp on openwrt?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
Does vpp acl sourpport ajust priority?
I have configured ten acl rules, if i want to move the tenth acl to be the
first acl, is there a easy way to do this?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https
Hi all,
Does node snat surpport fragmented packet? My vpp version is 17.07.
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Thanks
Regards,
Ewan
yug...@telincn.com
From: Steve Shin (jonshin)
Date: 2017-08-11 23:01
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] Policy routing
Hi Ewan,
In VPP we have a generic classifier feature that can be used to filter user
specific traffic to support PBR.
User can
Hi,
Does vpp surpport policy routing?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi,
I mean that if a src ip flow was forwarded through interface A, then no matter
what the l4 ports are, all this src ip flows must be forwarded through
interface A.
Can we do this in VPP?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-08-08 22:23
To: vpp-dev
Subject
Hi,
I've configured several equal-cost routes, and i also want some src ip flows to
be forwarded through the specified interface, not follow the equal-cost route
results, any guides?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing lis
Hi，
Please let us know about it then, thanks.
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-08-03 13:32
To: chupenghong; vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] Workers for SNAT may compete for the same outside
address and
Hi all,
Is there any plan to configure bond interface with cmd?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
I had found out a mistake, thanks.
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-15 14:36
To: vpp-dev
Subject: Re: [vpp-dev] tx_packet_error
Hi all,
If vpp is running on the vm, everything is ok. But on physical host system,
somethimes it can't work af
clue?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-15 10:21
To: vpp-dev
Subject: Re: tx_packet_error
Hi all,
With cmd "vppctl pcap tx trace on", I have caught tx packets, any guides?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 201
Thanks,
Ewan
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-07-13 19:59
To: Luke, Chris; yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] trace
Folks,
If one wants/needs to trace packets which vpp creates from whole cloth, here’s
how to do it. Typically, it’s an input-node
Hi all,
With cmd "vppctl pcap tx trace on", I have caught tx packets, any guides?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-13 12:13
To: vpp-dev
Subject: tx_packet_error
Hi all,
After hours of running, vpp can rx packets, but can't tx packets.
Her
Hi all,
Cmd "vppctl trace add" only work for input nodes? Such as "dpdk-input" and
"af-packet-input".
I found out that cmd "vppctl trace add ip4-input 1000" doesn't work.
Regards,
Ewan
yug...@telincn.com
___
12
We have checked that VNET_SW_INTERFACE_FLAG_ADMIN_UP and
VNET_HW_INTERFACE_FLAG_LINK_UP are both setted.
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Is this framework will be applied to IPoE?
Regards,
Ewan
yug...@telincn.com
From: Ni, Hongjun
Date: 2017-06-26 10:39
To: Ni, Hongjun; yug...@telincn.com; Vincent Jardin
CC: vpp-dev
Subject: RE: [vpp-dev] PPPOE
To make it clear:
The PPPoE plugin will contains fast path graph node and slow
Hi，
Linux's PPPoE is very slow on creating new session, i will figure that out.
Thanks,
Ewan
yug...@telincn.com
From: Vincent Jardin
Date: 2017-06-17 04:29
To: yug...@telincn.com
CC: vpp-dev
Subject: Re: [vpp-dev] PPPOE
FYI, 6WIND provides a full PPP stack (L2TP, PPPoE) server and cl
Hi all
Is there any plan to surpport pppoe?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi,
I have found that code, thanks.
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-06-15 16:19
To: yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] det nat expire
Hi,
Life time (expire time) is updated when packet is
Hi all,
Every nat session has it's life time, if only beyond that time, it will be
deleted.
So what if one user is downloading huge file and the downloading time is beyond
the session life time.
I have't seen any code on this, am i missed something?
Regards,
Ewan
yug...@t
Hi there,
New applications can do this themselves, but what about old applications such
as TFTP?
Regards,
Ewan
yug...@telincn.com
From: otroan
Date: 2017-05-26 16:52
To: yugang
CC: vpp-dev
Subject: Re: [vpp-dev] ALG
Hi there,
> Many applications have two channels, one is data chan
Hi Ole,
Not yet, but i don't know whether fd.io projects can provide fine-grained
traffic control as openflow does, or whether fd.io can be agile on traffic.
What's your opnion?
Regards,
Ewan
yug...@telincn.com
From: otroan
Date: 2017-05-30 15:50
To: yugang
CC: vpp-dev
Subject
Hi all,
Is there any plan to surpport openflow?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
devices.
Regards,
Ewan
yug...@telincn.com
From: otroan
Date: 2017-05-23 18:42
To: yugang
CC: vpp-dev
Subject: Re: [vpp-dev] ALG
Hi Ewan,
> Is there any plan to surpport ALG?
I am quite the non-believer with regards to ALGs.
But you can always make a proposal. What ALGs do you need and
Hi all,
Is there any plan to surpport ALG?
Regards,
Ewan
ewan
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
?? ()
#11511 0x840fff854501 in ?? ()
#11512 0x45d389480089 in ?? ()
#11513 0x3940578bed31ed31 in ?? ()
#11514 0x00401f0f79736857 in ?? ()
^C#11515 0x148b48017d8dee89 in ?? (Quit
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev
Hi,
Thanks.
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-05-22 12:55
To: yug...@telincn.com; otroan
CC: vpp-dev
Subject: RE: [vpp-dev] five tuple nat
Hi,
You probably use older VPP version, ICMP support for deterministic NAT
Hi,
There is no code to process ICMP in func "snat_det_in2out_node_fn", so it
treats ICMP packet as UDP packet, then we get the wrong output packet.
Regards,
Ewan
yug...@telincn.com
From: otroan
Date: 2017-05-20 20:00
To: yug...@telincn.com
CC: vpp-dev
Subject: Re: [vpp-dev] five
Hi all,
My mistake, sorry to bother :) .
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-05-20 15:20
To: vpp-dev
Subject: Segmentation fault in loading snat_plugin.so
Hi all,
Thanks for time.
I have adjusted snat nodes like below, then i got segmentation fault.
It seems
Hi all,
Thanks for time.
I have adjusted snat nodes like below, then i got segmentation fault.
It seems that when node snat-det-out2in is registering himself, there is no
node snat-out2in.
But node snat-out2in was already registered before that, why ?
VLIB_NODE_FUNCTION_MULTIARCH (snat_out2in_
Hi Ole,
Thanks, it seems that there is no icmp procedure in det nat, why is it like
this?
Regards,
Ewan
ewan
From: otroan
Date: 2017-04-25 16:06
To: yugang
CC: vpp-dev
Subject: Re: [vpp-dev] five tuple nat
Ewan,
> Do we have any plan to surpport five tuple nat like linux kernel?
That sh
Thanks for your advice.
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-05-15 14:29
To: yug...@telincn.com; vpp-dev
Subject: RE: RE: [vpp-dev] SNAT deterministic crash
Hi,
we don't have plan to allocate memory dynamically (
Hi,
Do we have any plan to allocate memory dynamicly, i mean use the memory when
it needed in the packets forwarding procedure?
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-05-15 13:47
To: yug...@telincn.com; vpp-dev
Thanks.
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-05-15 13:53
To: yug...@telincn.com; vpp-dev
Subject: RE: RE: [vpp-dev] snat crash
https://wiki.fd.io/view/VPP/Command-line_Arguments#.22heapsize.22_parameter
Matus
From: yug
Hi,
You me this file "/etc/vpp/startup.conf ", i have not found any para to
control heapsize yet, could you show me how to set heapsize?
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-05-15 13:44
To: yug...@telincn.com; vpp-dev
S
Hi all,
I have add compile option -DCLIB_VEC64,
if i want to get this cmd "vppctl snat deterministic add in 192.168.60.0/16 out
10.10.55.1/32" work, what else need i to do?
Or how much mem do i need here?
Regards,
Ewan
yug...@telincn.com
_
c:1248
#19 dispatch_process (vm=0x779aa2a0 , p=0x7fffb5324000,
last_time_stamp=652099886127260, f=0x0) at
/usr/src/1704/VBRASV100R001/vpp1704/build-data/../src/vlib/main.c:1291
#20 0x in ?? ()
(gdb)
Regards,
Ewan
yug...@telincn.com
_
Hi neale,
Could you leave me a msg then?
Thanks,
Ewan
yug...@telincn.com
From: Neale Ranns (nranns)
Date: 2017-05-13 20:33
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] Segmentation fault in recursivly lookuping fib entry.
Hi Ewan,
That’s a bug. I’ll fix it ASAP.
Thanks,
neale
argv=) at
/usr/src/1704/VBRASV100R001/vpp1704/build-data/../src/vlib/unix/main.c:604
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi,
I mean that these two interfaces both are l3 mode in vpp, with default config
mode,
there are two relevant interfaces which are bound to dpdk in vm are bridged to
the same phy interface.
I used VM Workstation here.
Am i clear?
Regards,
Ewan
yug...@telincn.com
From: Neale Ranns
GigabitEthernet2/a/0
yug...@telincn.com
From: Neale Ranns (nranns)
Date: 2017-05-12 20:44
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] arp_input
Hi Ewan,
Please post your configs and the output of ‘sh ip arp’.
Thanks,
neale
From: on behalf of "yug...@telincn.com&qu
.04
if (!((FIB_ENTRY_FLAG_ATTACHED & src_flags) ||
(FIB_ENTRY_FLAG_CONNECTED & src_flags))
)
{
error0 = ETHERNET_ARP_ERROR_l3_src_address_not_local;
goto drop2;
}
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@l
Thanks,
I have fixed it.
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-04-27 14:50
To: vpp-dev
Subject: [vpp-dev] ubuntu 16.04.1 EAL: Error reading from file descriptor 11:
Input/output error
Hey, guys.
Why there are so many errors.
(gdb) r -c /etc/vpp/startup.conf
criptor 11: Input/output error
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-04-27 14:30
To: Burt Silverman
Subject: Re: Re: [vpp-dev] build on ubuntu 14.04.1 failed
Hey,
Why so many errors any guide?
I started vpp in gdb and got these.
EAL: Error reading from file descriptor 11: Input/ou
ool-native/tools
/usr/vpp/vpp/build-root/../src/configure: line 2231: LT_INIT: command not found
configure: error: cannot find install-sh, install.sh, or shtool in .
"/usr/vpp/vpp/build-root/../src"/.
make: *** [tools-configure] Error 1
root@ubuntu:/usr/vpp/vpp/build-root#
Hey,
Do we have any plan to surpport five tuple nat like linux kernel?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
I can't see anything in vpp trace, so what else we need to do to setup dpdk
interface.
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-03-12 11:04
To: vpp-dev@lists.fd.io
Subject: [vpp-dev] MTU
Hi, all
Both dpdk hardware and vpp interface mtu is 9216, why it
00:0c:29:b3:30:97
Intel 82540EM (e1000)
carrier up full duplex speed 1000 mtu 9216
rx queues 1, rx desc 512, tx queues 1, tx desc 512
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/ma
Thanks, that is helpful.
Can we use rte_spinlock_lock directly on vpp? Or any other options?
Regards,
Ewan.
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-03-02 20:10
To: yug...@telincn.com; Luke, Chris; Ed Warnicke
CC: vpp-dev
Subject: RE: RE: [vpp-dev] system func in vpp
Do you
Is func rte_malloc safe to be called between rte_spinlock_lock adn
rte_spinlock_unlock or can it be only called at main thread?
Ewan
yug...@telincn.com
From: Luke, Chris
Date: 2017-03-01 20:14
To: yug...@telincn.com; Dave Barach (dbarach); Ed Warnicke
CC: vpp-dev
Subject: RE: RE: [vpp
I would like send five tuples 、 mac 、traffic etc. info out, which can be
display out some where.
I will try shared memory api.
Regards,
Ewan
yug...@telincn.com
From: Luke, Chris
Date: 2017-03-01 20:14
To: yug...@telincn.com; Dave Barach (dbarach); Ed Warnicke
CC: vpp-dev
Subject: RE: RE
Thanks.
So it's not security to use unix socket too? If i want to send some data from
vpp to linux or to another process, any options?
Regards,
Ewan
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-02-28 21:12
To: Luke, Chris; yug...@telincn.com; Ed Warnicke
CC: vpp-dev
Su
I would like to add veth interface in vpp for every phy interface, " system("ip
link add vpp type veth peer name kernel-vpp") ".
It's convenient to do this from vpp.
Regards,
Ewan.
yug...@telincn.com
From: Ed Warnicke
Date: 2017-02-28 11:44
To: yug...@telincn.com
CC
"int system(const char *command)"
I would like to use this func to start another dameon , such as "
system("zebra -d") ".
Regards,
Ewan
yug...@telincn.com
From: Ed Warnicke
Date: 2017-02-28 11:15
To: yug...@telincn.com
CC: vpp-dev
Subject: Re: [vpp-dev] sy
Hi, all
Does vpp can't use func system? Any reason to this or what can i do if i
really need ?
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi, ALL
I would like to pick out one kind of flow which without five tuple session and
lead them to the specified CPU worker.
The benifet is that we need no locker in the session creation procedure.
What your guys opinion?
Regards,
Ewan.
yug...@telincn.com
Hi all
I create a ppp interface and set ip on it, the interface route dpo is glean,
which means need to be resloved by arp? How could i to get this correct?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https
I will try that, thanks.
Ewan
yug...@telincn.com
From: Shwetha Bhandari (shwethab)
Date: 2017-01-21 16:58
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] Tuple Classify
You could use the classifier to do this:
Example: To redirect IP6 flows with destination matching to a node named
+1
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-01-21 07:58
To: Damjan Marion (damarion); t...@lists.fd.io; csit-...@lists.fd.io;
honeycomb-...@lists.fd.io; disc...@lists.fd.io; vpp-dev; nsh_sfc-...@lists.fd.io
Subject: Re: [vpp-dev] [discuss] VPP 17.01 Released
Hey Damjan
Hi, all
Is there any ways to redirect specified five tuples packet to a certain node?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
My mistake, sorry to bother, thanks.
Regards,
Ewan
yug...@telincn.com
发件人： yug...@telincn.com
发送时间： 2017-01-19 16:06
收件人： 余刚; vpp-dev
主题： 回复: [vpp-dev] send packet in vpp
Here is my node func.
VLIB_REGISTER_NODE( ip4_timer_test_node) = {
.function = ip4_timer_test_process,
.type
Here is my node func.
VLIB_REGISTER_NODE( ip4_timer_test_node) = {
.function = ip4_timer_test_process,
.type = VLIB_NODE_TYPE_PROCESS,
.name = "ip4-timer-test-process",
.state = VLIB_NODE_STATE_POLLING,
};
Regards,
Ewan
yug...@telincn.com
发件人： yug...@telincn.com
ip40);
b0->current_length = radlen + sizeof (ip4_header_t) + sizeof (udp0);
//vlib_put_frame_to_node(vm, ip4_lookup_node.index, f);
}
}
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
I have tried that now, and it's working.
Thanks,
Ewan
yug...@telincn.com
From: Damjan Marion
Date: 2017-01-16 23:16
To: yugang
CC: Dave Barach (dbarach); vpp-dev
Subject: Re: [vpp-dev] rte_timer
Have you considered to use process nodes instead?
If you search forvlib_process_suspen
sr/src/VPP16/vpp1609/build-root/build-vpp-native/dpdk/dpdk-16.07/lib/librte_timer/rte_timer.c:431
#3 0x0040fe53 in main (argc=26, argv=0xb08810) at
/usr/src/VPP16/vpp1609/build-data/../vpp/vnet/main.c:271
(gdb)
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-01-15 21:45
To: y
Hi, all.
If i would like to use dpdk timer, what extra configuration i need to make?
Since that if i just call func " rte_eal_init(argc, argv)" in vpp, it always
reminds me that there is not enough DPDK mem, why?
Regards,
Ewan.
yug...@t
Hi, thanks for your time to read this.
In function "ip4_lookup_multicast", the ethernet header is one byte
dislocation, which we get it throuch api "ethernet_buffer_get_header".
It's right in the unicast process like "ip4_lookup", is there somethin
an: GigabitEthernet2/6/0
6.0.0.3/32
unicast-ip4-chain
[@0]: dpo-load-balance: [index:14 buckets:1 uRPF:13 to:[0:0]]
[0] [@2]: dpo-receive: 6.0.0.3 on GigabitEthernet2/6/0
10.0.0.0/24
unicast-ip4-chain
[@0]: dpo-load-balance: [index:12 buckets:1 uRPF:11 to:[0:0]]
[0] [@0]: dpo-drop ip
I think you do not need to do this, because the control plane will do such
route stuff, but the premise is that you have listened to the change of the
control plane.
yug...@telincn.com
From: Matej Klotton -X (mklotton - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-01-02 23:29
To: Neale Ranns
;
u8 next_hop_address[16];
}) vl_api_ip_add_del_route_t;
Regards,
By Ewan.
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi, all, thanks for your time.
Please help me to check this, how to fix this compile error, thanks.
It's ok on some vms, but not all vms, why.
Building vlib in /usr/src/vpp1609/build-root/build-vpp-native/vlib
make[2]: Entering directory `/usr/src/vpp1609/build-root/build-vpp-native/vl
interface.
For example, if the registering interface is "host-vpp0", it's ok to find it
with func " hash_get_mem ", if the registering interface is "host-vpp1", it's
failed to
find "host-vpp0" which has already
Hi all
I would like to use kni interface on vpp to connect vpp and linux kernel, is
there any guides?
Best wishes,
By Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
#
Connection closed by foreign host.
Disconnected from remote host(Workstation) at 18:13:38.
Why, is there something missed?
yug...@telincn.com
From: yug...@telincn.com
Date: 2016-12-15 18:06
To: 余刚; John Lo (loj); vpp-dev
Subject: Re: Re: [vpp-dev] startup.conf
Hi all,
VPP could not get up with
Sorry to bother, I have figure it out, thanks.
yug...@telincn.com
From: yug...@telincn.com
Date: 2016-12-15 18:06
To: 余刚; John Lo (loj); vpp-dev
Subject: Re: Re: [vpp-dev] startup.conf
Hi all,
VPP could not get up with the first startup.conf, but it's ok with second
startup.conf.
Why
Thank you
yug...@telincn.com
From: John Lo (loj)
Date: 2016-12-15 11:57
To: yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] startup.conf
https://wiki.fd.io/view/VPP/Command-line_Arguments#.22dpdk.22_parameters
From: vpp-dev-boun...@lists.fd.io [mailto:vpp-dev-boun...@lists.fd.io] On
Thanks , everyone
I have allready found that page.
Best wishes,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2016-12-15 11:52
To: vpp-dev
Subject: startup.conf
Hi, all
Thanks for your time.
Where could i get a document which describes how to write startup.conf. I would
like to
Hi, all
Thanks for your time.
Where could i get a document which describes how to write startup.conf. I would
like to configure dpdk parameters, such as kni ports num and so on.
Best wishes,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp
Hi,
May be that your nic is not support VTx, just try to switch to intel nic.
By Ewan
yug...@telincn.com
发件人： 王鹏
发送时间： 2016-12-02 15:25
收件人： vpp-dev
主题： [vpp-dev] Can not see any interface but local0
Hello， anyone
When viewing the interfaces, (use command: sudo vppctl show interface), I
1 - 100 of 108 matches
Mail list logo
