Re: [vpp-dev] RFC: move the “1”st instance of the community meeting 3 hours earlier to reduce impact for earlier time zone

+1. Hope more PRC guys will join and contribute to VPP community! From: vpp-dev@lists.fd.io On Behalf Of qian xu Sent: Wednesday, November 23, 2022 9:28 AM To: vpp-dev@lists.fd.io Cc: Li, Jokul Subject: Re: [vpp-dev] RFC: move the “1”st instance of the community meeting 3 hours earlier to reduc

Re: [vpp-dev] #lb vpp lb does not works with my configuration

Hi Jinlei, It seems that you run LB feature in bridge domain, which is unexpected. VPP LB is a Layer 3/Layer 4 LB, which will first pass through ip4-input-no-checksum and ip4-lookup. Here is the packet trace for your reference: Packet 1 00:03:33:529453: dpdk-input TenGigabitEthernet5/0/0 rx q

[vpp-dev] (VPP-1734) Worker Thread stops reading from its Handoff Queue

Hi folks, Could some guy help to take a look at this issue: https://jira.fd.io/browse/VPP-1734 The issue is a side effect of changes introduced by https://github.com/FDio/vpp/commit/80965f599aa90288c8c139e7e3a31726b89eb9a4#diff-f660570fc2dc57455f2c52b20880bfd8 in VPP 19.04. It's a difficult /

Re: [vpp-dev] vpp with gtpu

: Ni, Hongjun ; vpp-dev@lists.fd.io Subject: RE: vpp with gtpu Hi, Hongjun Packets are attached Thanks, -Ruijing From: Ni, Hongjun mailto:hongjun...@intel.com>> Sent: Thursday, October 31, 2019 3:12 PM To: Guo, Ruijing mailto:ruijing@intel.com>>; vpp-dev@lists.fd.io<

Re: [vpp-dev] vpp with gtpu

Hi Ruijing, It seems that there may be some issue on the gtpu decapsulation. Could you help to capture the traffic between the vpp1 side and vpp2 side? Thanks, Hongjun From: Guo, Ruijing Sent: Thursday, October 31, 2019 2:57 PM To: vpp-dev@lists.fd.io Cc: Ni, Hongjun Subject: vpp with gtpu

Re: [vpp-dev] VPP core dump with PPPoE

Hi Raj, I tried to reproduce your issue on VPP 20.01 as per your steps for some times, but cannot reproduce it. From your description, please set a breakpoint in vnet_pppoe_add_del_session(). And to see what happened when you create your second pppoe session with traffic in first pppoe session.

Re: [vpp-dev] lb vpp hang and unrecoverable

Hi Cipher, Has submitted a patch to fix the VPP hang issue. I tested in my server, and it does not hang again. https://gerrit.fd.io/r/#/c/vpp/+/22329/ Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Cipher Chen Sent: Tuesday, September 24, 2019 4:28 PM To: vpp

Re: [vpp-dev] #vpp #lb vpp hang and unrecoverable

Hi Cipher, Which VPP version are you using? We have found similar issue before and had a patch fixed it in VPP 19.08. https://jira.fd.io/browse/VPP-1680 Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Cipher Chen Sent: Tuesday, September 24, 2019 11:14 AM To:

[vpp-dev] UDPI project has been approved to an incubation project by FD.io TSC

list: https://lists.fd.io/g/udpi-dev Thanks, Hongjun From: Ni, Hongjun Sent: Tuesday, August 27, 2019 1:03 AM To: Ni, Hongjun ; Edward Warnicke Cc: t...@lists.fd.io; vpp-dev@lists.fd.io; Wang, Xiang W ; Hong, Yang A ; Chang, Harry ; gu.ji...@zte.com.cn; Shan Jianghua ; Zhang Yang ; Li Xingfu

Re: [vpp-dev] [tsc] Project Proposal for uDPI

Welcome Alibaba join UDPI as a founder, and Pengjie Li, Zhao Zhang, Zhangpeng Xie as initial committers. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Monday, August 19, 2019 8:10 AM To: Ni, Hongjun ; Edward Warnicke Cc: t...@lists.fd.io

Re: [vpp-dev] VPP 19.08 release is available!

Congratulations to all guys involved! -Original Message- From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Andrew Yourtchenko Sent: Wednesday, August 21, 2019 1:58 PM To: vpp-dev ; csit-dev Subject: [vpp-dev] VPP 19.08 release is available! Hi all, the VPP release 1

Re: [vpp-dev] [tsc] Project Proposal for uDPI

Welcome Netgate join UDPI as a founder and Jim Thompson as initial committer. Thanks, Hongjun From: t...@lists.fd.io [mailto:t...@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Saturday, August 17, 2019 4:28 AM To: Edward Warnicke Cc: t...@lists.fd.io; vpp-dev@lists.fd.io; Wang, Xiang W ; Hong

Re: [tsc] [vpp-dev] Project Proposal for uDPI

Thanks Xingfu, Vrako, Christian for your helpful comments! Thanks, Hongjun From: Vratko Polak -X (vrpolak - PANTHEON TECHNOLOGIES at Cisco) [mailto:vrpo...@cisco.com] Sent: Friday, August 16, 2019 9:03 AM To: 李幸福(Xingfu Li) ; Ni, Hongjun ; Alexey ; t...@lists.fd.io Cc: vpp-dev@lists.fd.io

Re: [vpp-dev] [tsc] Project Proposal for uDPI

Hi Ed, The next TSC meeting on August 29 is preferable. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Edward Warnicke Sent: Thursday, August 15, 2019 3:13 AM To: Ni, Hongjun Cc: t...@lists.fd.io; vpp-dev@lists.fd.io; Wang, Xiang W ; Hong, Yang A ; Chang

Re: [vpp-dev] [tsc] Project Proposal for uDPI

Hi Ed, Thank you for scheduling the proposal review. I think a TSC meeting after Aug 21 is better, to follow the FD.io TSC policy. Thanks, Hongjun From: Ed Warnicke [mailto:hagb...@gmail.com] Sent: Wednesday, August 14, 2019 5:09 AM To: Ni, Hongjun Cc: t...@lists.fd.io; vpp-dev@lists.fd.io

Re: [vpp-dev] Project Proposal for uDPI

, and C language, using Apache 2.0 License. We plan to support most industry network protocols/applications. Both have different scopes, features, implementations and Licenses. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Friday, August 9

Re: [vpp-dev] Project Proposal for uDPI

Hi Alexey, Could you give some thoughts on this? Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Alexey Sent: Friday, August 9, 2019 6:54 PM To: Ni, Hongjun ; t...@lists.fd.io Cc: vpp-dev@lists.fd.io; Wang, Xiang W ; Hong, Yang A ; Chang, Harry ; gu.ji

[vpp-dev] Project Proposal for uDPI

Hello FD.io TSCs Please accept this project proposal for uDPI for consideration. https://wiki.fd.io/view/Project_Proposals/uDPI So far, this project has 11 founders and 15 initial committers from Intel, ZTE, China Telecom, HuachenTel, Inspur, Yxlink, Sunyainfo, Tencent, China Unicom, Huawei, Qin

Re: [vpp-dev] build error in VPP master branch

Hi Zhiyong, You need to run below command first: make install-ext-deps Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Florin Coras Sent: Friday, May 17, 2019 10:55 AM To: Yang, Zhiyong Cc: vpp-dev@lists.fd.io Subject: Re: [vpp-dev] build error in VPP master

[vpp-dev] Sweetcomb 19.08 Release Plan

Hi Folks, Below are the 19.08 Release Plan we discussed in weekly meetings. Please correct me if something missed. If you have more requirements, Please let us know. # Integrate gNMI with Sysrepo # Restconf support # ACL * - Add OC Yang Models. * - Add OC Translation Layer. *

[vpp-dev] FW: Sweetcomb 19.04 Released

FYI. In case some guys are not in the dev mail list. Thanks, Hongjun From: t...@lists.fd.io [mailto:t...@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Tuesday, April 30, 2019 5:44 PM To: sweetcomb-...@lists.fd.io Cc: t...@lists.fd.io Subject: [tsc] Sweetcomb 19.04 Released Hey all, The Sweetcomb

Re: [vpp-dev] HQoS

Hi Abeeha, There is a patch submitted to fix the API change. https://gerrit.fd.io/r/#/c/16839/ Could you help to give it a try? Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Abeeha Aqeel Sent: Monday, May 6, 2019 6:32 PM To: Ni, Hongjun Cc: b

Re: [vpp-dev] HQoS

3:28 PM To: Ni, Hongjun Cc: b...@xflowresearch.com; vpp-dev@lists.fd.io Subject: [vpp-dev] HQoS Hi Hongjun, I have been trying to implement downstream bandwidth limiting using HQoS plugin in vpp. It works fine for a certain number of clients (less than 5) but doesn’t assign proper bandwidth for

Re: [vpp-dev] VPP PPPoE Plugin

Hi Aqeel, Actually, we have tested 64K PPPoE sessions on 18.01 release, and it works well. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Wednesday, April 17, 2019 4:04 PM To: Abeeha Aqeel ; vpp-dev@lists.fd.io Cc: b...@xflowresearch.com

Re: [vpp-dev] VPP PPPoE Plugin

Hi Aqeel, Could you send out the core dump log when VPP crash with 7000 sessions? Thanks, Hongjun From: Abeeha Aqeel [mailto:abeeha.aq...@xflowresearch.com] Sent: Tuesday, April 16, 2019 8:01 PM To: Ni, Hongjun ; vpp-dev@lists.fd.io Cc: b...@xflowresearch.com Subject: VPP PPPoE Plugin Dear

Re: [vpp-dev] performance compare between vpp loadbalancer and LVS

Hi Ruijing, Here is the deck that will be presented on ONS NA 2019 this week. VPP Accelerated High Performance & Scalable L3DSR L4 Load Balancer on Top Clos https://events.linuxfoundation.org/wp-content/uploads/2018/07/ONS.NA_.2019.VPP_LB.merged.pdf There is some performance data on VPP L3DSR (on

Re: [vpp-dev] Status of PPPoE Plugin

Thanks Damjan. Will look into it and find some way to resolve it. Thanks, Hongjun From: Damjan Marion [mailto:dmar...@me.com] Sent: Friday, March 22, 2019 3:41 PM To: Ni, Hongjun Cc: l...@cisco.com; vpp-dev@lists.fd.io Subject: Re: [vpp-dev] Status of PPPoE Plugin On 22 Mar 2019, at 07:34

Re: [vpp-dev] Status of PPPoE Plugin

:34 PM To: dmar...@me.com; Ni, Hongjun Cc: vpp-dev@lists.fd.io Subject: Re: [vpp-dev] Status of PPPoE Plugin Thanks for citing the PPPoE RFC 2516, Damjan. The RFC goes on to describe how to resolve the MAC address for PPPoE sessions in Section 5 in discovery stage. As such, there is really

Re: [vpp-dev] Status of PPPoE Plugin

...@xflowresearch.com; Ni, Hongjun Subject: Re: [vpp-dev] Status of PPPoE Plugin I commented out the offending parts and now PPPoE is working fine. diff --git a/src/vnet/ethernet/node.c b/src/vnet/ethernet/node.c index 53d5b4eb0..7c5f673e0 100755 --- a/src/vnet/ethernet/node.c +++ b/src/vnet/ethernet

[vpp-dev] Sweetcomb 19.01 Released

Hey all, The Sweetcomb 19.01 Release is out. Packages can be downloaded from Package Cloud: https://packagecloud.io/fdio/1901 Many thanks to all contributors and members for your great contribution and help! Especially thanks to Ed Warnicke, Vanessa and Drenfong for setting infra quickly. The

Re: [vpp-dev] Streaming Telemetry with gNMI server

Hi Yohan and Stevan, Thank you for your great work! FD.io has a sub-project named Sweetcomb, which provides gNMI Northbound interface to upper application. Sweetcomb project will push its first release on Feb 6, 2019. Please take a look at below link for details from Pantheon Technologies: https

[vpp-dev] How to add Sweetcomb to FD.io Code Contribution Metrics?

Hi folks, Could someone help to guide how to add Sweetcomb to FD.io Code Contribution Metrics? http://stackalytics.com/?release=all&project_type=fdio-group&metric=commits Thanks, Hongjun -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#11742): http

Re: [vpp-dev] Status of PPPoE Plugin

Hi Raj, For the issue you mentioned, Alp Arslan in the To list will submit a patch to fix it. To Alp Arslan, Thank you for your great help! Thanks, Hongjun -Original Message- From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Raj Sent: Tuesday, December 18, 2018 8:11

Re: [vpp-dev] vpp router plugin threads? (vpp + router + netlink + FRRouting)

Hi Burt and Brian, VPP has leveraged cmake to compile code after release 18.10, but vppsb still use make to compile code. We tried to port router plugin to VPP, and it can work, but it is not accepted by VPP community. https://gerrit.fd.io/r/#/c/15062/ You need to rework VPPSB’s building system

Re: [vpp-dev] Maintainer router plugin

Hi Justin, There is no plan to use memif at present. Welcome your contribution if you will. In router plugin, we inject links, routes, etc. from different namespace in Kernel into different VRFs In VPP. Not support multi-instance mode. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@

Re: [vpp-dev] PPPOE

Hi Xiangyun, VPP only supports PPPoE plugin, which can integrate with Control Plane to act as PPPoE server. Please refer to below link for some slides: https://schd.ws/hosted_files/onsna18/cf/Accelerated%20Open%20Source%20vBRAS%20Solution%20Based%20on%20OpenBRAS%20and%20VPP%26DPDK.PPTX There is

Re: [vpp-dev] [sweetcomb-dev] Initial code for Sweetcomb project has been upstreamed

v@lists.fd.io ____ 王传国 山东华辰泰尔信息科技股份有限公司 研发中心 电话：0531-62325309 88877658-8019 手机：18615184689 传真：0531-88870859 网址：http://www.huachentel.com<http://www.huachentel.com/> 地址：山东省济南市高新区舜华路2000号

Re: [vpp-dev] [sweetcomb-dev] Initial code for Sweetcomb project has been upstreamed

it could be claimed as production quality. I wish luck to all sweetcomb contributors on this long journey. Rastislav From: sweetcomb-...@lists.fd.io<mailto:sweetcomb-...@lists.fd.io> mailto:sweetcomb-...@lists.fd.io>> On Behalf Of Ni, Hongjun Sent: Monday, November 19, 201

[vpp-dev] Initial code for Sweetcomb project has been upstreamed

Hi all, Initial code for Sweetcomb project has been upstreamed as a code base. It is contributed by Cisco (written by Rastislav Szabo) and HuachenTel. https://gerrit.fd.io/r/#/c/16020/ Initial code commit for Sweetcomb project But there are many rework to do and new features to be added. If you a

Re: [vpp-dev] PPPoE plugin documentation/support

h.com [mailto:alp.ars...@xflowresearch.com] Sent: Friday, November 9, 2018 4:04 PM To: Ni, Hongjun ; vpp-dev@lists.fd.io Subject: RE: [vpp-dev] PPPoE plugin documentation/support Yes, that seems to be the problem. The control plane interface is dropping the replies with error "L3 MAC MISMATCH&qu

Re: [vpp-dev] [tsc] Project Proposal for Sweetcomb

: sweetcomb-...@lists.fd.io<mailto:sweetcomb-...@lists.fd.io> Thank you again, Hongjun From: t...@lists.fd.io [mailto:t...@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Thursday, November 8, 2018 10:57 PM To: Ni, Hongjun ; Edward Warnicke Cc: t...@lists.fd.io; vpp-dev@lists.fd.io; Wang, Dr

Re: [vpp-dev] [tsc] Project Proposal for Sweetcomb

Hi TSC members, Our Initial code has been refactored and gone through internal legal review. How can we submit the code to the fd.io Foundation for IPR Review? Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Thursday, November 8, 2018 12

Re: [vpp-dev] PPPoE plugin documentation/support

to set your control interface to l2 mode. Thanks, Hongjun -Original Message- From: alp.ars...@xflowresearch.com [mailto:alp.ars...@xflowresearch.com] Sent: Thursday, November 8, 2018 6:38 PM To: Ni, Hongjun ; vpp-dev@lists.fd.io Subject: RE: [vpp-dev] PPPoE plugin documentation/support S

Re: [vpp-dev] [tsc] Project Proposal for Sweetcomb

Welcome Cisco to join Sweetcomb project! https://wiki.fd.io/view/Project_Proposals/Sweetcomb Thanks a lot, Hongjun From: t...@lists.fd.io [mailto:t...@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Thursday, November 1, 2018 8:40 AM To: Ni, Hongjun ; Edward Warnicke Cc: t...@lists.fd.io; vpp-dev

Re: [E] [vpp-dev] VPPSB Netlink build failing

Hi Florin, Netlink/router plugin is implemented as some graph nodes in the data plane, It is better to use C FIB APIs to update FIB. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Florin Coras Sent: Monday, November 5, 2018 11:06 AM To: Ni, Hongjun Cc

Re: [E] [vpp-dev] VPPSB Netlink build failing

...@me.com] Sent: Monday, November 5, 2018 1:32 AM To: Ni, Hongjun Cc: alp.ars...@xflowresearch.com; Kevin Yan ; vpp-dev@lists.fd.io Subject: Re: [E] [vpp-dev] VPPSB Netlink build failing Personally i think it should stay in vppsb. I agree we miss integration with open source routing protocol

Re: [E] [vpp-dev] VPPSB Netlink build failing

Hi Guys, We are working on moving VPPSB Netlink to VPP main repo: https://gerrit.fd.io/r/#/c/15062/ Port VPPSB's rtnetlink & router plugin to VPP main This patch is under review and consolidating, but it could work well and you can use it. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp

Re: [vpp-dev] [tsc] Project Proposal for Sweetcomb

Welcome ZTE to join! Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Thursday, October 25, 2018 9:22 AM To: Edward Warnicke Cc: t...@lists.fd.io; vpp-dev@lists.fd.io; Wang, Drenfong ; ??? ; chen...@huachentel.com; lizhuo

Re: [vpp-dev] [tsc] Project Proposal for Sweetcomb

-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Edward Warnicke Sent: Tuesday, October 23, 2018 9:47 PM To: Ni, Hongjun Cc: t...@lists.fd.io; vpp-dev@lists.fd.io; Wang, Drenfong ; ??? ; chen...@huachentel.com; lizhuo...@cmhi.chinamobile.com; ??? ; zhijl@chinatelecom.cn; changlin

Re: [vpp-dev] PPPoE plugin documentation/support

- From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of alp.ars...@xflowresearch.com Sent: Wednesday, October 24, 2018 2:49 PM To: Ni, Hongjun ; vpp-dev@lists.fd.io Subject: Re: [vpp-dev] PPPoE plugin documentation/support Dell - Internal Use - Confidential Dear Hongjun, I was able

Re: [vpp-dev] [tsc] Project Proposal for Sweetcomb

Hi Ed, OK. I or some project proposer will join the Nov 8 8am PT TSC meeting and present the proposal. Thanks a lot, Hongjun From: t...@lists.fd.io [mailto:t...@lists.fd.io] On Behalf Of Edward Warnicke Sent: Tuesday, October 23, 2018 9:15 PM To: Ni, Hongjun Cc: t...@lists.fd.io; vpp-dev

[vpp-dev] Project Proposal for Sweetcomb

Hello FD.io TSCs Please accept this project proposal for Sweetcomb for consideration. https://wiki.fd.io/view/Project_Proposals/Sweetcomb This project has nine founding companies: Intel, HuachenTel, China Mobile, China Unicom, China Telecom, NXP, Tieto, Tencent, Alibaba. If possible, I would li

Re: [vpp-dev] PPPoE plugin documentation/support

PM To: Ni, Hongjun ; vpp-dev@lists.fd.io Subject: Re: [vpp-dev] PPPoE plugin documentation/support Dell - Internal Use - Confidential Dear Hongjun, Thanks for the reply. I am using the VPP version 18.07. If the tap_cli is still present, can you please point me towards what could be the

Re: [vpp-dev] PPPoE plugin documentation/support

Hi Alp Arslan, Since tap_cli code is going to be deprecated in favour of tapv2. I suggest you leverage tapv2, and also need some rework for PPPoE plugin. Thanks, Hongjun -Original Message- From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of alp.ars...@xflowresearch.com S

Re: [vpp-dev] Unable to build router plugin

anks, Hongjun -Original Message- From: Carlito Nueno [mailto:carlitonu...@gmail.com] Sent: Thursday, October 18, 2018 11:16 AM To: Ni, Hongjun Cc: Mehran Memarnejad ; vpp-dev@lists.fd.io Subject: Re: [vpp-dev] Unable to build router plugin Hi Hongjun, Thanks for the patch. I tried to compile

Re: [vpp-dev] PPPoE plugin config #vpp #vpp

Hi Berk, As per previous email mentioned: “tap_cli code we don't want to test. as it is going to be deprecated in favour of tapv2. Code is not done yet just because people were ignoring requests to move to the new code (inc. VIRL).” I suggest you leverage tapv2, and also need some rework for PP

Re: [vpp-dev] PPPoE plugin config #vpp #vpp

Hi Berk, You need to create a tap or AF_packet interface in VPP, and Openbras bind to this interface. There is unnecessary to put clients and CP to the same bridge. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of berk...@gmail.com Sent: Monday, October 15,

Re: [vpp-dev] Unable to build router plugin

Hi guys, I have submitted a patch to fix the build issue in VPPSB project: https://gerrit.fd.io/r/#/c/15135/ Fix build issue due to vpp's function parameters change I have tested it and it works well in my server. Thanks, Hongjun -Original Message- From: vpp-dev@lists.fd.io [mailto:vpp-

Re: [vpp-dev] To support plugin's statistics

Thank you Ole! Will give it a try. Thanks, Hongjun -Original Message- From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Ole Troan Sent: Thursday, September 6, 2018 10:39 PM To: Ni, Hongjun Cc: vpp-dev Subject: Re: [vpp-dev] To support plugin's statistics Ho

[vpp-dev] To support plugin's statistics

Hi Ole and all, I get that you guys have developed a new statistics infrastructure recently. Could you help to give me some guide on how to add plugin's stats to the new stats infra? Thanks a lot, Hongjun -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply O

Re: [vpp-dev] Move NSH plugin to VPP project as a separate plugin

: Ni, Hongjun Cc: nsh_sfc-...@lists.fd.io; hc2...@lists.fd.io; Edward Warnicke ; Kinsella, Ray Subject: Re: [nsh_sfc-dev] Plan to move NSH plugin to VPP project as a separate plugin Hi Hongjun , As part of our requirement we are trying to use UDP as a transport layer inline with https

Re: [vpp-dev] IP reassembly doesn't work in VPP 18.07

Thank you Ole ! Will give it a try. -Original Message- From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Ole Troan Sent: Monday, August 6, 2018 4:35 PM To: Ni, Hongjun Cc: vpp-dev ; Hu, Xuekun Subject: Re: [vpp-dev] IP reassembly doesn't work in VPP 18.07 Looks

[vpp-dev] IP reassembly doesn't work in VPP 18.07

Hi all, We performed below test on VPP 18.07, and it seems that IP reassembly doesn't work in VPP 18.07. Below is the test topology: Machine A is the VPP DUT, while machine B is just a standard Linux server. Network topology: Machine A (VPP) <> Machine B ; And set both MTU to 1500 Issue: "pi

Re: [vpp-dev] [csit-dev] VPP Release 18.07 is out!

Congratulations to the VPP community !! From: csit-...@lists.fd.io [mailto:csit-...@lists.fd.io] On Behalf Of Edward Warnicke Sent: Tuesday, July 31, 2018 10:57 AM To: vpp-dev ; csit-...@lists.fd.io Subject: [csit-dev] VPP Release 18.07 is out! VPP Release 18.07 is out. Packages are in the usua

Re: [vpp-dev] GTPu

Thanks Kingwei for your effort on improving GTPU plugin. Please submit some patches and add chengqiang@intel.com as one of reviewers. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Edward Warnicke Sent: Friday, June 8, 2

Re: [vpp-dev] Raydonetworks's implementation of pppoeclient for vpp

Below is the copyrights from your based open source pppd project: I think BSD-style license is ok. Not sure whether GPL is acceptable for VPP community? VPP is under Apache License, Version 2.0. Copyrights: *** All of the code can be freely used and redistributed. The individual source

Re: [vpp-dev] How to add plugin's statistics into stats thread

/2/src/plugins/lb/lb.api Thank you, Hongjun From: Jerome Tollet (jtollet) [mailto:jtol...@cisco.com] Sent: Monday, May 7, 2018 3:15 PM To: Ni, Hongjun ; vpp-dev Cc: Mori, Naoyuki ; Yusuke Tatsumi Subject: Re: [vpp-dev] How to add plugin's statistics into stats thread Hi Hongjun, Coul

[vpp-dev] How to add plugin's statistics into stats thread

Hi all, We want to add plugin's statistics into VPP stats thread. But it seems that current stats thread only support codebase (i.e. vnet) statistics. Is there some mechanism to support adding plugin's statistics into stats thread? Thanks, Hongjun

Re: [vpp-dev] problem in pppoe testing

Hi xyxue, This is a implementation mechanism: To set up a PPPoE session, you need to first go through PPPoE discovery stage. Via which VPP will learn a PPPoE link entry. Then you can create a PPPoE session successfully. You cannot configure a oE session directly without PPPoE discovery stage.

Re: [vpp-dev] openSUSE build fails

Hi Marco, Thank you for your explanation. Would contact you if I ran into similar issue again. Thanks, Hongjun From: Marco Varlese [mailto:mvarl...@suse.de] Sent: Friday, January 26, 2018 4:21 PM To: Ni, Hongjun ; Ole Troan Cc: Dave Barach (dbarach) ; Gabriel Ganne ; Billy McFall ; Damjan

Re: [vpp-dev] openSUSE build fails

I rechecked this patch twice, and it built successfully now. But why need to recheck twice? -Hongjun From: Ole Troan [mailto:otr...@employees.org] Sent: Friday, January 26, 2018 2:53 PM To: Ni, Hongjun Cc: Dave Barach (dbarach) ; Marco Varlese ; Gabriel Ganne ; Billy McFall ; Damjan Marion

Re: [vpp-dev] openSUSE build fails

Hi Ole, I have no OpenSUSE at hand, and could not give it a try. -Hongjun From: Ole Troan [mailto:otr...@employees.org] Sent: Friday, January 26, 2018 2:08 PM To: Ni, Hongjun Cc: Dave Barach (dbarach) ; Marco Varlese ; Gabriel Ganne ; Billy McFall ; Damjan Marion (damarion) ; vpp-dev

Re: [vpp-dev] openSUSE build fails

Hi all, It seems that OpenSUSE build failed for this patch: https://jenkins.fd.io/job/vpp-verify-master-opensuse/1285/console Please help to take a look at it. Thanks a lot. Thanks, Hongjun From: vpp-dev-boun...@lists.fd.io [mailto:vpp-dev-boun...@lists.fd.io] On Behalf Of Dave Barach (dbarac

Re: [vpp-dev] [csit-dev] VPP 18.01 Release artifacts are now available on nexus.fd.io

Congratulations to VPP community! From: csit-dev-boun...@lists.fd.io [mailto:csit-dev-boun...@lists.fd.io] On Behalf Of Dave Wallace Sent: Thursday, January 25, 2018 1:23 PM To: vpp-dev@lists.fd.io; csit-...@lists.fd.io Subject: [csit-dev] VPP 18.01 Release artifacts are now available on nexus.fd

[vpp-dev] 1G hugepage support in VPP //RE: "ftruncate: Invalid argument" in VPP startup

Hi all, I also tested master and stable/1710 release using 1G hugepage. Below is the test result: For stable/1710, it could work well using 1G hugepage. For master, it failed to start up when using 1G hugepage, just like below. Because 1G hugepage support is required for some performance tests, a

Re: [vpp-dev] [tsc] [nsh_sfc-dev] Stepping down as NSH_SFC PTL

Hi all, Thank you all for your great help and support! Will continue to contribute and promote FD.io project. Thanks again, Hongjun From: tsc-boun...@lists.fd.io [mailto:tsc-boun...@lists.fd.io] On Behalf Of Ed Warnicke Sent: Thursday, January 18, 2018 12:07 AM To: Kinsella, Ray Cc: t...@list

Re: [vpp-dev] VPP native vhost-user issue on stable/1710

Hi Steven, Thank you for your clarification. It is clear to me now. Thanks a lot, Hongjun From: Steven Luong (sluong) [mailto:slu...@cisco.com] Sent: Friday, January 12, 2018 11:42 PM To: Ni, Hongjun ; vpp-dev@lists.fd.io Cc: Ramakrishnan, Kuralamudhan Subject: Re: [vpp-dev] VPP native vhost

[vpp-dev] VPP native vhost-user issue on stable/1710

Hi all, I am trying to use VPP native vhost-user to communicate between Host and Containers. But I met an issue, Could you help to give some advice on it? Thanks a lot. My setup is as bellows: Inside Host: vppctl create vhost socket /tmp/sock0 server vppctl set int state VirtualEthernet0/0/0 up

Re: [vpp-dev] [nsh_sfc-dev] Stepping down as NSH_SFC PTL

Thank you all for voting. Really appreciated! From: vpp-dev-boun...@lists.fd.io [mailto:vpp-dev-boun...@lists.fd.io] On Behalf Of Keith Burns Sent: Wednesday, January 10, 2018 8:27 AM To: Zhou, Danny Cc: t...@lists.fd.io; nsh_sfc-...@lists.fd.io; a...@yunify.org; vpp-dev@lists.fd.io Subject: Re

Re: [vpp-dev] kube-proxy test fail

Hi Gabriel, Thank you. Will take a look at this patch. -Hongjun From: Gabriel Ganne [mailto:gabriel.ga...@enea.com] Sent: Wednesday, December 20, 2017 5:12 PM To: Ni, Hongjun ; vpp-dev@lists.fd.io Subject: Re: kube-proxy test fail Oh, I understand. Sorry. Well, since I had a look, I came

Re: [vpp-dev] kube-proxy test fail

Hi Gabriel, Currently, kube-proxy plugin only supports NAT44, so skip other test cases. NAT66, NAT46 and NAT64 will be added later. Thanks, Hongjun From: Gabriel Ganne [mailto:gabriel.ga...@enea.com] Sent: Wednesday, December 20, 2017 4:03 PM To: Ni, Hongjun ; vpp-dev@lists.fd.io Subject: Re

Re: [vpp-dev] kube-proxy test fail

Hi Gabriel, I used below command and it works well: make test TEST=test_kubeproxy Could you give it a try? Thanks, Hongjun From: Gabriel Ganne [mailto:gabriel.ga...@enea.com] Sent: Tuesday, December 19, 2017 8:54 PM To: vpp-dev@lists.fd.io; Ni, Hongjun Subject: kube-proxy test fail Hi

Re: [vpp-dev] [SFC] Query regarding SFC classifier configuration for ip4 traffic

Hi Phaneendra, Please see inline comments. -Hongjun From: Phaneendra Manda [mailto:mphaneen...@gmail.com] Sent: Sunday, November 5, 2017 1:18 AM To: Ni, Hongjun Cc: vpp-dev@lists.fd.io; nsh_sfc-...@lists.fd.io Subject: Re: [vpp-dev] [SFC] Query regarding SFC classifier configuration for ip4

Re: [vpp-dev] gtpu tunneling decap-next ip4 issue

) [mailto:nra...@cisco.com] Sent: Thursday, November 2, 2017 8:36 PM To: Ni, Hongjun ; Ryota Yushina ; vpp-dev@lists.fd.io Subject: Re: [vpp-dev] gtpu tunneling decap-next ip4 issue Hi Hongjun, We need an ARP entry on the tunnel interface? That’s not great. If a GTPu interface is point to point we

Re: [vpp-dev] gtpu tunneling decap-next ip4 issue

Hi Ryota, Below is my configuration to test GTP-U encapsulation for your reference: set int state TenGigabitEthernet5/0/0 up set int ip table TenGigabitEthernet5/0/0 0 set int ip address TenGigabitEthernet5/0/0 192.168.50.72/24 ip route add 192.168.50.71/24 via 192.168.50.72 TenGigabitEthernet5/0

Re: [vpp-dev] [SFC] Query regarding SFC classifier configuration for ip4 traffic

Hi Phaneendra, Please refer to below link to see how to configure it and packet trace: https://wiki.fd.io/view/File:NSH-Classifier-Output.png -Hongjun From: Phaneendra Manda [mailto:mphaneen...@gmail.com] Sent: Wednesday, November 1, 2017 4:39 PM To: Ni, Hongjun Cc: vpp-dev@lists.fd.io

Re: [vpp-dev] [SFC] Query regarding SFC classifier configuration for ip4 traffic

Hi Phaneendra, Please try below scripts: classify table mask l3 ip4 proto classify session l2-input-hit-next input-node nsh-classifier table-index 0 match l3 ip4 proto 6 opaque-index 47615 set int l2 bridge TenGigabitEthernet5/0/0 1 1 set interface l2 input classify intfc TenGigabitEthernet5/0/0

Re: [vpp-dev] Query on configuration on multithread mode

y, October 17, 2017 9:28 PM To: Ni, Hongjun Cc: vpp-dev Subject: Re: [vpp-dev] Query on configuration on multithread mode My wild guess here is that you are doing barrier sync on each session.With more workers sync takes longer…. On 17 Oct 2017, at 08:56, Ni, Hongjun mailto:hongjun...@intel.c

[vpp-dev] Query on configuration on multithread mode

Hi vpp-dev, We are doing performance test in multithread mode, and have a doubt: (1). For one main thread and one worker thread, then configuring 16K PPPoE sessions took about 100 seconds. (2). For one main thread and eight worker thread, then configuring 16K PPPoE sessions took about 260 secon

Re: [vpp-dev] Multiple VRFs in 1609

Hi Michael and Neale, As per my previous fixing experience on router plugin, I guess that the cause may locate at: Function tap_inject_enabel(): add IPv4 multicast route. Please take a look at this function and multicast route involved. -Hongjun From: vpp-dev-boun...@lists.fd.io [mailto:vpp-dev

Re: [vpp-dev] Failed to build vpp with vppsb

Hey, I have created a patch to remove vlib_buffer_chain_validate() on July, https://gerrit.fd.io/r/#/c/7382/ Remove unused call vlib_buffer_chain_validate() But it is not merged yet. For router plugin in vppsb, it works well on VPP 17.01, but it lacks maintenance since then. -Hongjun From: vpp

Re: [vpp-dev] mprove Performance of Kube-proxy and GTP-U using VPP

From: Tran Long [mailto:long...@gmail.com] Sent: Wednesday, September 27, 2017 6:51 PM To: Ni, Hongjun Subject: mprove Performance of Kube-proxy and GTP-U using VPP Dear Mr Hongjun ni I have read your slide Improve Performance of Kube-proxy and GTP-U using VPP. It's very useful for me. Than

Re: [vpp-dev] using vpp as pppoe client

Hi Jonathan, Yes, you are right. Current VPP plus PPPoE plugin implements the data plane of a PPPoE server, such as vBRAS. It can be integrated with Control Plane, such as Open BRAS with link: https://github.com/wfnex/openbras Currently, it could not be used as a PPPoE client. For now, there is

Re: [vpp-dev] vhost-user stable implementation?: VPP native or DPDK

Hi, We also tested VPP vhost-user last week, and it did not work too. Jianfeng Tan and I tried to locate the cause using DPDK testpmd, And found that VPP vhost works well, but VPP virtio-user in container does not work. -Hongjun From: vpp-dev-boun...@lists.fd.io [mailto:vpp-dev-boun...@lists.

Re: [vpp-dev] Regarding vxlan_tool.py in SFC vNF

a [mailto:srikanth.ling...@nxp.com] Sent: Thursday, September 7, 2017 5:10 PM To: Ni, Hongjun Cc: Yang, Yi Y ; vpp-dev@lists.fd.io; nsh_sfc-...@lists.fd.io Subject: RE: Regarding vxlan_tool.py in SFC vNF Hi Hongjun, Sometime back, we are discussing about VPP in the place of vxlan_tool.py. Now, I am abl

Re: [vpp-dev] Do we have any plan to support DNAT

Hi Ole, Thank you for detailed explanation. Will give it a try. -Hongjun -Original Message- From: Ole Troan [mailto:otr...@employees.org] Sent: Tuesday, August 15, 2017 4:24 AM To: Ni, Hongjun Cc: vpp-dev Subject: Re: [vpp-dev] Do we have any plan to support DNAT Hongjun, > Do

[vpp-dev] Do we have any plan to support DNAT

Hey guys, Do we have any plan to support DNAT feature? Thanks, Hongjun ___ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev

Re: [vpp-dev] PPPOE

mailto:vpp-dev-boun...@lists.fd.io] On Behalf Of Ni, Hongjun Sent: Tuesday, July 18, 2017 10:59 AM To: Ole Troan Cc: vpp-dev Subject: Re: [vpp-dev] PPPOE Adds the link to OpenBras we are using: https://github.com/wfnex/openbras Correct below type error: //Configure CP path and DP session in C

Re: [vpp-dev] VPP router plugin

-vpp-native/router/lib64/router.so.0.0.0 /usr/lib/vpp_plugins/router.so -Hongjun From: Bhanu Chander Gaddoju [mailto:bhanu.gadd...@nxp.com] Sent: Tuesday, July 18, 2017 11:02 PM To: Ni, Hongjun Subject: VPP router plugin Hi Hongjun, We are trying to build dynamic routing daemon with VPP

Re: [vpp-dev] PPPOE

-mac 00:11:01:00:00:01 vppctl ip route add 100.1.1.2/24 via pppoe_session0 Thanks, Hongjun -Original Message- From: Ni, Hongjun Sent: Tuesday, July 18, 2017 10:35 AM To: Ni, Hongjun ; Ole Troan Cc: vpp-dev Subject: RE: [vpp-dev] PPPOE Hi all, The initial PPPoE plugin code has been

  1   2   >