HI Sergio,
As I mentioned that transport mode is working now.
Next I tried tunnel mode.
Here I can see successfully packet decryption. But later inner packet gets
dropped.
Outer IPSec packet is like 172.28.128.4 -> 172.28.128.5
Inner packet is 1.1.1.1 -> 2.2.2.2
I have added 2.2.2.2 on same int
Thanks Sergio,
DPDK based IPsec basic tunnel worked with multi-core config.
cpu {
main-core 0
corelist-workers 1
#skip-cores 4
workers 1
}
Now since DPDK basic IPSec is working. I will try to dig in more in detail.
One query I posted in early threads, possibly got
Jacek,
It's also been on my list for a while to add a better bulk add for MAP domains
/ rules.
Any idea of the scale you are looking at here?
Best regards,
Ole
> On 5 Sep 2017, at 15:07, Jacek Siuda wrote:
>
> Hi,
>
> I'm conducting a tunnel test using VPP (vnet) map with the following
> p
Marek,
What is the uid/gid of /dev/shm/vpe-api ?
Is the user a member of the vpp group?
Does your VPP workspace include the patch c900ccc34 "Enabled gid vpp in
startup.conf to allow non-root vppctl access" ?
Thanks,
-daw-
On 09/05/2017 06:08 AM, Marek Gradzki -X (mgradzki - PANTHEON
TECHNO
Thanks for the update John. I'll this along to our test team. Not sure when
we can schedule a retest, but when we do, I'll provide our results.
Thanks again,
Billy
On Tue, Sep 5, 2017 at 10:10 AM, John Lo (loj) wrote:
> Hi Billy,
>
>
>
> I submitted fixes for VPP-963, now merged in both 17.07 a
There are a few different ways to set cores/workers, best explained in
the following link:
https://wiki.fd.io/view/VPP/Using_VPP_In_A_Multi-thread_Model
Thanks,
Sergio
On 05/09/2017 15:10, Mukesh Yadav (mukyadav) wrote:
Thanks Sergio,
I will for sure try latest clone with a fix.
Besides w
Thanks Sergio,
I will for sure try latest clone with a fix.
Besides what is configuration to test same with worker core.
Will be helpful for me in future..
Thanks
Mukesh
On 05/09/17, 6:22 PM, "Sergio Gonzalez Monroy"
wrote:
Hi Mukesh,
I was able to find the bug. It was not direct
Hi Billy,
I submitted fixes for VPP-963, now merged in both 17.07 and master/17.10, that
I believe should address the NDR/PDR performance issue with the 10K and 1M flow
cases. The regression was caused by a bug fix in the L2 learning path to update
stale time stamp and sequence number of MAC en
Dear Jacek,
Use of the clib memory allocator is mainly historical. It’s elegant in a couple
of ways - including built-in leak-finding - but it has been known to backfire
in terms of performance. Individual mheaps are limited to 4gb in a [typical]
32-bit vector length image.
Note that the idios
Hi,
I'm conducting a tunnel test using VPP (vnet) map with the following
parameters:
ea_bits_len=0, psid_offset=16, psid=length, single rule for each domain;
total number of tunnels: 30, total number of control messages: 600k.
My problem is with simple adding tunnels. After adding more than
~
Hi Mukesh,
I was able to find the bug. It was not directly related to transport
mode but to the setup when using single core (master core) without
workers ( https://gerrit.fd.io/r/8302 ).
You can either apply the change or setup VPP to use workers (at the
moment you are running with single c
Hi,
I am having problems with running CLI against named vpp instance (g809bc74):
sudo vpp api-segment { prefix vpp0 }
sudo vppctl -p vpp0 show int
clib_socket_init: connect: Connection refused
But ps shows vpp process is running.
It worked with 17.07.
Is it no longer supported or I need some a
Hello,
Can you help me on below query related to 1G huge pages usage in VPP.
Regards,
Balaji
On Thu, Aug 31, 2017 at 5:19 PM, Balaji Kn wrote:
> Hello,
>
> I am using *v17.07*. I am trying to configure huge page size as 1GB and
> reserve 16 huge pages for VPP.
> I went through /etc/sysctl.d/8
Minimum nasm version is 12.02.
Which distro are you running? I guess if you already had an old nasm
version installed, running install-dep wouldn't check the version.
Thanks,
Sergio
On 05/09/2017 09:32, 薛欣颖 wrote:
Hi Sergio,
I have run 'make install-dep'.
The nasm version is 2.10.09.
Than
Hi Sergio,
I have run 'make install-dep'.
The nasm version is 2.10.09.
Thanks,
xyxue
From: Sergio Gonzalez Monroy
Date: 2017-09-05 16:24
To: 薛欣颖; vpp-dev
Subject: Re: [vpp-dev] Compile error
Hi,
Have you run 'make install-dep' ?
Which nasm version do you have in your system?
Thanks,
Sergi
On 04/09/2017 17:07, Mukesh Yadav (mukyadav) wrote:
HI Sergio,
I see new document as updated in latest clone is as below:
dpdk {
dev :81:00.0
dev :81:00.1
dev :85:01.0
dev :85:01.1
vdev crypto_aesni_mb0,socket_id=1
vdev crypto_aesni_mb1,socket_id=1
Hi,
Have you run 'make install-dep' ?
Which nasm version do you have in your system?
Thanks,
Sergio
On 04/09/2017 11:59, 薛欣颖 wrote:
Hi，
I got code by ： git clone https://gerrit.fd.io/r/vpp.
input ‘make dpdk-install-dev’ the error infomation is shown below：
Building IPSec-MB 0.46 library
ma
17 matches
Mail list logo
