Re: [vdr] BBC HD went DVB S2

your vdr did everything alright. > DVB-S to DVB-S2, my VDR did not > notice that, it is set to 3 (update PIDs and Names). neither Audio-/Video- Pids nor the names of these channels changed. --- Mario Schulz schrieb am Sa, 11.6.2011: > Von: Mario Schulz > Betreff: [vdr] BBC HD went DVB S2 > An

Re: [vdr] Skystar USB HD + VDR + Astra 23.5E 11817 V / 8psk, fec=5/6

have you tried this patch written by Old_Man? http://www.vdr-portal.de/board16-video-disk-recorder/board85-hdtv-dvb-s2/p977938-stb0899-fec-3-4-tester-gesucht/#post977938 kind regards Newsy --- N. D. schrieb am Do, 22.11.2012: > Von: N. D. > Betreff: Re: [vdr] Skystar USB HD + VDR + Astra 23.

Re: [vdr] NTSC closed captions

Hi Klaus! Hi Alex! Actually I know one channel receivable in Europe that uses CC directly included into the V-PID. VLC can decode those CC subtitles. It's MSNBC on Telstar 12 15°West 12509 V 3198 7/8 kind regards Newsy Klaus Schmidinger schrieb am S

[vdr] Possible PAFF interlaced stream bug(s) fixed in FFMPEG

Hi! Premiere introduced thix system for their HDTV some days ago. With thix bugfix it's working fine again! Unfortunately it seems to need more cpu power than the normal system :( regards Newsy __ Gesendet von Yahoo! Mail. Dem pfi

Re: [vdr] In Atention of vdr-xine developer.

hi! this is the way I compile ffmpeg + xine1.2 in ffmpeg folder: CLFAGS="MYCFLAGS" ./configure --prefix=/usr --ALLOTHEROPTIONS in xine-lib1.2 folder: CPPFLAGS="-I/usr/include/libavcodec -I/usr/include/libavdevice -I/usr/include/libavformat -I/usr/include/libavutil -I/usr/include/libpostproc"

[vdr] how to prevent xineplayer to go in slow-motion mode

Hi! if I get short drop outs on a channel (NO Signal for example) the video goes on in normal speed, but after 3 or 4 further drop-outs the sound disappears and the video is in some kind of slow motion. I have to switch to another channel and back to get picture and sound normal. How to preven

Re: [vdr] New Video Decode and Presentation API from NVidia

isn't there support for VDPAU support for xine if you compile xine with option --with-externel-ffmpeg ? kind regards Newsy --- HighlyCaffeinated <[EMAIL PROTECTED]> schrieb am Di, 25.11.2008: > Von: HighlyCaffeinated <[EMAIL PROTECTED]> > Betreff: Re: [vdr] New Video Decode and Presentation

[vdr] Fwd: GOTOX patch for 1.7.5 -> rotor plugin

Why not using rotor plugin? It's working ok even with 1.7.11, but there's a bug with my s2-3200. I don't know if it's a HW or SW bug, but if I am on a High Band transponder (22khz is active) the rotor doesn't move, so I have to switch to a low band transponder first. Workround would be to disab

Re: [vdr] reelchannelscan & rotor plugin don't compile with vdr 1.7.13

anybody got vdr 1.7.14 working with rotor plugin + this patch. It's compiling without any probs but when I go to rotor menu I cannot select satellite, there always "position: 0" and it can't be toggled. regards Newsy --- Goga777 schrieb am So, 7.3.2010: > Von: Goga777 > Betreff: Re: [vdr] r

Re: [vdr] reelchannelscan & rotor plugin for VDR 1.7.14

Hi Goga, I already got rotor plugin patched with rotor-0.1.5-vdr-1.7.13.diff and I patched vdr 1.7.14 with vdr-1.7.9-rotor.diff manually. Still suffering that problem Did I miss something? regards Newsy --- Goga777 schrieb am Sa, 27.3.2010: > Von: Goga777 > Betreff: Re: [vdr] reelchannelsca

Re: [vdr] reelchannelscan & rotor plugin for VDR 1.7.14

thx Goga for your quick answer but there's no difference after I used extension patch on a clean vdr 1.7.14. regards Newsy --- Goga777 schrieb am Sa, 27.3.2010: > Von: Goga777 > Betreff: Re: [vdr] reelchannelscan & rotor plugin for VDR 1.7.14 > An: vdr@linuxtv.org > Datum: Samstag, 27. März

Re: [vdr] reelchannelscan & rotor plugin for VDR 1.7.14

I made a patch -p1 -i ExtP-NG-vdr-1.7.14-V1.diff in vdr root dir. then I copied Make.config.template to Make.config, uncommented rotor =1 line for rotor I did a patch -p1 -i rotor-0.1.5-vdr-1.7.13.diff from src/rotor dir. all hunks succeeded. regards Newsy --- Goga777 schrieb am Sa, 27.3

Re: [vdr] reelchannelscan & rotor plugin for VDR 1.7.14

yes I already took patch nr. 2 from http://www.forum.free-x.de/wbb/index.php?page=Thread&postID=13727#post13727 Seems for me like a bug. rotor plugin can't find out which satellite current channel is. regards Newsy --- Goga777 schrieb am Sa, 27.3.2010: > Von: Goga777 > Betreff: Re: [vdr] ree

Re: [vdr] reelchannelscan & rotor plugin don't compile with vdr 1.7.13

thx Goga, this at least helped to find out what is not working. I always used gotox not gotoposition. When I choose goto position, this method is working, but gotox is not. there one thing that's really wierd. After I changed rotor.conf like you suggested (before I had a 0 for all positions, as

Re: [vdr] reelchannelscan & rotor plugin don't compile with vdr 1.7.13

anybody found the bug in rotor plugin? did the name of function to get satellite positions change? In 1.7.11 it still worked fine, I didn't test 1.7.12 + 1.7.13, but at least 1.7.14 has this bug regards Newsy --- Goga777 schrieb am So, 28.3.2010: > Von: Goga777 > Betreff: Re: [vdr] reelcha

[vdr] dvb-s2 transponder can be received but channels are not automatically found

hi! I noticed a new vdr problem concerning only some of those dvb-s2 transponders. If I create a new channel in channel list with these transponder datas and "add new channels" is activated in vdr settings nothing happens either. But when I set manually SID manually video + audio pids are found

Re: [vdr] dvb-s2 transponder can be received but channels are not automatically found

sorry, one more thing to mention: I just deleted all those channels on that frequency. Ned3 HD Film1 HD Sport1 HD were automatically added but the other were not. kind regards Newspaperman --- Newsy Paper schrieb am Fr, 7.5.2010: > Von: Newsy Paper > Betreff: dvb-s2 transponder

[vdr] vdr and aac support

Hi! there are some channels using aac for audio. I.e. SABC1 at 23.5°East 10758 V 22000 8/9 DVB-S2 Seems vdr doesn't support aac as no pid is entered neither for apid nor for ddpid. I think xine should support acc or doesn't it? So it should be no big deal do extend vdr to support aac. kind re

Re: [vdr] dvb-s2 transponder can be received but channels are not automatically found

er_name_length: 13 (0x0d) service_provider_name: "Canaldigitaal" -- Charset: Latin alphabet service_name_length: 10 (0x0a) Service_name: "Sport 1 HD" -- Charset: Latin alphabet CRC: 4053997927 (0xf1a31967) ==

Re: [vdr] vdr and aac support

> Betreff: Re: [vdr] vdr and aac support > An: vdr@linuxtv.org > Datum: Freitag, 14. Mai, 2010 16:13 Uhr > On 07.05.2010 09:53, Newsy Paper > wrote: > > Hi! > > > > there are some channels using aac for audio. I.e. > SABC1 at 23.5°East 10758 V 22000 8/9 DVB-S2 >

Re: [vdr] vdr and aac support

but this way I can not hear sound from other channels, only > the > channels with streamtype 0x11 > is there any way to identify the audio streamtype in this > line so that > the MakeStream (buf + i, streamaudiotype, Channel-> APID > (n)); > > Excuse my English > Best

Re: [vdr] dvb-s2 transponder can be received but channels are not automatically found

alphabet --- Klaus Schmidinger schrieb am So, 16.5.2010: > Von: Klaus Schmidinger > Betreff: Re: [vdr] dvb-s2 transponder can be received but channels are not > automatically found > An: vdr@linuxtv.org > Datum: Sonntag, 16. Mai, 2010 16:24 Uhr > On 15.05.2010 14:50, Newsy

Re: [vdr] dvb-s2 transponder can be received but channels are not automatically found

er > Betreff: Re: [vdr] dvb-s2 transponder can be received but channels are not > automatically found > An: vdr@linuxtv.org > Datum: Sonntag, 16. Mai, 2010 20:31 Uhr > On 16.05.2010 19:13, Newsy Paper > wrote: > > Hi Klaus, > > > > thx very much. with this li

Re: [vdr] vdr and aac support

gt; On 16.05.2010 12:55, Klaus > Schmidinger wrote: > > On 15.05.2010 20:00, Newsy Paper wrote: > >> hi Luis, > >> > >> seems like an ugly hack. Channel I'm receiving > here has: > >> Stream_type: 15 (0x0f)  [= ISO/IEC 13818-7 > Audio wi

Re: [vdr] vdr and aac support

funny, today sound works with xine, yesterday it didn't although I had sound on all other channels with mpeg2 audio. Even recorings work fine, so aac support is perfect here :) kind regards Newspaperman --- Newsy Paper schrieb am So, 16.5.2010: > Von: Newsy Paper > Betreff: Re

[vdr] xineliboutput teletext streaming

Hi, Is there a way to stream teletext plugin with xineliboutput so that you can use the teletext function of vlc, as vlc offers teletext level 2.5. Or will vdr prevent streaming of teletext pid? kind regards Newspaperman ___ vdr mailing list vdr@

Re: [vdr] xineliboutput teletext streaming

ist'" > Datum: Mittwoch, 19. Mai, 2010 12:48 Uhr > > > -Original Message- > From: vdr-boun...@linuxtv.org > [mailto:vdr-boun...@linuxtv.org] > On Behalf Of > Newsy Paper > Sent: den 19 maj 2010 12:29 > To: vdr@linuxtv.org > Subject: [vdr] xine

[vdr] Filter filler-nalus in h264 recordings?

Hi, I read that there are often filler-nalu bytes in h264 streams. Would it be possible to filter those filler-nalus and not to same them on hdd when recording a h264 stream? Or would this corrupt the stream? kind regards Newspaperman ___ vdr mail

Re: [vdr] Unwatchable channels (vdr-xine, dxr3, vlc, mplayer)

which DVB card and which driver version do you use? I also had those problems with an old skystar 2. Nr of pid filters was too low and datarate of the stream was to high to transport it completely I was told. Later I bought a TT s2-3200 and problems were gone on these transponder but there were

Re: [vdr] [PATCH] GOTOX patch for vdr-1.7.13

Hi Alex, why not using rotor plugin? Rotor 0.1.4 mh 1.2 has this feature: http://dl.free.fr/p21k0puwn/rotor.tar.gz if you are using vdr >= 1.7.14 you need my patch http://vdr-portal.de/board/thread.php?threadid=99952&hilight=rotor&hilightuser=0&page=2 kind regards Newsy --- Bikalexander sch

Re: [vdr] Plugin for MHEG (BBC RedButton service)

hi John! sounds really great! Unfortunately this is not working with my vdr 1.7.17. Compiling all works fine as in your instructions. But if I include both plugins with -Predbutton and -Pmheg I can't connect to xineliboutput any more. :( Anybody knows what modifications are needed to fix this is

[vdr] xineliboutput: no sound with radio plugin (concerning StillPicture function)

Hi! I want to mention a bug in xineliboutput plugin concerning the StillPicture function used by the radio and music plugin. If radio plugin calls these function StillPicture will be shown but sound goes away immediately. With xine-plugin there's no such problem, it is a bug of xineliboutput.