- DVD-író
- webcam 0.3 MP
- 2 év garancia
2160.- RON áfástól
köszi,
Füley István
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Sorry for this, my mistake :(
On 2011.06.14. 21:54, Füley István wrote:
Szia,
ezt a laptopot tudnám ajánlani:
Asus X52JU-SX244D
- kijelző 15.6 ColorShine HD (1366x768) LCD
- processzor INTEL Core i3 350M (2.26 GHz, cache 3 MB, FSB MHz)
- memória 2+1 GB DDR3 (1066 MHz)
- HDD 500 GB 5400 rpm
2011.11.11. 3:14 keltezéssel, Torgeir Veimo írta:
Am wondering if it would be hard to enhance the femon plugin to show a
graph of signal quality and correction statistics?
Basically, a histogram with STR, SNR, BER and UNC, so that one doesn't
have to oogle the screen constantly to see how signal
Just a question:
Do you need to transcode the audio stream? Why don't use the elementary
audio stream from the DVB source?
something like this:
http://www.fuley.ro:3014/ES/S1.0W-1536-705-30511+1
István
On 2011.12.06. 17:00, Teemu Suikki wrote:
Hi!
I need a mp3 audio stream of live tv channel
On 2011.12.18. 1:23, Kartsa wrote:
How about DLNA? I found something about DLNA server plugin but was not
sure how it was used. If I would install that plugin and byu a DLNA
player could that combination work? Or better yet does anyone have any
experience on such combination?
I'm using vdr + st
Hi,
I'm not using such a card, but I use a multituner (4 tuner) VDR setup,
and I really like this 8 tuner/1slot idea.
I have two major problems with my setup;
1. Using PCI cards I'm limited to a maximum of 5 tuners, and I also need
to use a PCI gigabit network adapter, so I have 4 tuners. I ha
Hello,
I'm using latest xineliboutput in client-server environment, and it
works fine for me. I have dozens of DVD images on a nfs share (created
with dd), and they are working well, no freezes, no crashes. DVD images
(.img) files appear with a letter "D" ahead in the browser menu, and
they'r
Subcribe.
On 2013.03.13. 15:40, Teemu Suikki wrote:
Hi!
Is there any simple audio output device?
I have two sound cards in my system. I would like to use one to play
audio of one tv channel, while the other is used normally with softhddevice.
I can probably hack it with streamdev and some mp3
Eepg is working fine here, even running in background by vdr's EPG scan.
The single issue I have is that the plugin is filling the log with
various messages, even if I set loglevel to a low value (1).
Regards,
István
On 2013.04.14. 11:05, Dimitar Petrovski wrote:
Hi, I maintain the eepg plug
On 2013.04.21. 15:54, Klaus Schmidinger wrote:
(...)
The question I have now is: will it be enough to have *one* single
positioner
in any given setup, or are there actually users who have more than one
positioner?
(...)
Klaus
Currently I have 4 tuners, each of them is connected to several
2013.10.20. 16:09 keltezéssel, Tony Houghton írta:
I recorded it from the 4Seven channel because I forgot about the first
showing on C4HD, and it seems only this channel is affected. Maybe
they haven't set deinterlacing flags correctly?
You should check the following line in ~/.xine/config_xine
Why do you need a DVB-C card?
You can use the FF DVB-S card for playback (output) only:
" -Pdvbsddevice --outputonly "
regards,
István
2013.11.17. 13:09 keltezéssel, Brian-Imap írta:
Hi,
dont kill me please..
I'm using a 4 Tuner Cine 2 DVB S2 setup for recording TV programs.
For
I'm also using this solution on one of my vdr clients, but of course
there is one limitation: you can only playback MPEG2 recordings, no
MPEG4 nor HD.
2013.11.17. 14:04 keltezéssel, Brian-Imap írta:
On 11/17/2013 12:16 PM, Füley István wrote:
Why do you need a DVB-C card?
You can use t
Hello,
I'm using a pretty complex vdr configuration, with 4 DVB-S2 devices,
every one of them is connected to 5 or 6 LNB's. The main
(streamdev-server) vdr instance is using all the 4 adapters, and
vdr-sxfe for output. I also run 2 more vdr instaces with stremdev-client
(without real DVB adap
2013.11.29. 15:19 keltezéssel, Frank Schmirler írta:
Hi István,
On Fri, 29 Nov 2013 12:17:58 +0200, Füley István wrote
The "channel not available" message is the expected behaviour when a negative
priority is configured on the client. With a priority of 0 or higher on the
client,
Bought a Raspberry Pi and am trying that with Openelec, and that seems
to work
pretty well as a client. Quite a cheap solution.
Cheers Brian
You should also try the "new" rpi output plugin from here:
http://www.vdr-portal.de/board18-vdr-hardware/board98-arm-co/120344-prototyp-rpi-ausgabeplug
Hello,
Can somebody tell me if using a Rasberry pi + rpihddevice plugin I get
picture on R-Pi's analog (RCA) TV out?
thanks,
István
2014.07.07. 20:08 keltezéssel, Norm Dressler írta:
Hi all, I just set up a couple of RPI's with the configuration of a
Raspberry Pi, rpihddevice and streamdev-c
Hello,
Can somebody tell me if using a Rasberry pi + rpihddevice plugin I get
picture on R-Pi's analog (RCA) TV out?
I would like to answer myself: it works perfectly :) Tested on Raspberry
Pi Model B, 512MB RAM.
BTW: awesome plugin, thanks!
István
2014.12.20. 17:54 keltezéssel, Brian-Imap írta:
What advantages does this software have over the stuff I am using?
Well, it depends. I'm using vdr for about 10 years, and I'm used to vdr
"behaviour" (menu, osd). Using rpihddevice plugin on a Raspberry Pi i
can continue to use VDR's menu.
Usi
2014.12.20. 20:41 keltezéssel, VDR User írta:
almost no resources to run VDR + mplayer plugin + mpv-player. With
How did you installed mpv-player on RPI? Did you compile it, or are you
using Jessie instead of Wheezy?
How stable it is? Does it using hw acceleration on PI?
thanks,
István
Hello,
I'n using mplayer with omxplayer, here is my mplayer.sh:
pi@pi01 ~ $ cat /var/lib/vdr/plugins/mplayer.sh
#!/bin/bash
export IFS="
"
omxplayer --key-config /var/lib/vdr/plugins/omxplayer/key.conf $1
killall -9 omxplayer.bin
exit
and my key.conf:
pi@pi01 ~ $ cat /var/lib/vdr/plugins/omx
I know, it's not a proper answer for your problem, but I think at the
moment the best native vdr client is a Raspberry Pi with Thomas Reufer's
great plugin. It's small, cheap and (using with vdr) it's fast.
I moved from vdr-sxfe to rpihddevice with all my 3 clients in the house.
regards,
Istv
2015.04.17. 10:24 keltezéssel, Patrick Boettcher írta:
Hi all,
And you are using streamdev-server on your vdr-host (which has all the
DVB-cards) and client on the RPI?
Yes, this is the basic arhitecture, but it is changing for time to time :)
I have 4 DVB-S2 cards on my headless server, which
2015.04.17. 13:07 keltezéssel, Reiner Bühl írta:
Hello István,
which USB DVB-S2 receiver do you use on your Raspberry Pi?
It's an old Terratec Cinergy S2:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_S2
I used it several years ago on my main server, but I had a problem with
it: i n
2016.02.09. 11:19 keltezéssel, Nicolas Huillard írta:
The mplayer plugin seem very old and may not work neatly with the
rpihddevice output.
I use mplayer plugin on my old RPI, and it's working fine, even with HD
.mkv-s. It's patched for using omxplayer instead of mplayer.
See details here (ne
>> Hm... I'm using a DVB-S FF card as TV-out and two budget DVB-T cards as the
>> input. I do not even have a sat dish. My FF does ONLY do TV-out.
>
> So the answer appears to be yes then. Thanks for clearing that up.
Great! This means, that I can go on with my budget-upgrade, the only issue
wi
On Sun, 18 Nov 2007, Klaus Schmidinger wrote:
Does anybody have a recommendation for such a board?
I'm afraid such a board does not exist, at least it is not an ordinary
desktop MB. Novadays an ordinary full ATX mobo has 3 PCI, 1 PCI-e 16x and
1 PCI-e, mATX boards have only 2 PCI ports. All
PCI-Express has nothing to do with PCI, they're different slots.
I'm selling hardware, and as I said before, current motherboards does not
have 5 PCI slots.
The last boards with 5 PCI slots were these: Asus P5P800, with AGP port,
socket 775 on board 10/100 LAN, DDR 1 support.
I have couple of th
> hi
>
> i bought the p5gc recently; it is the only board with
> 6x PCI, but without onboard graphics.
Ooops, you're right. P5GC has 6 PCI, and Gbit on board! On my list it
appears to have only 3 PCI ports, but I looked at the Asus site, and yes,
it has 6 PCI ports.
Great news (also for me!) :)
Hello list,
I followed the recent messages about the future of VDR with great
interest .
I would like to share my recent experiences about HDTV. As I
consider myself
to be open for "new technologies" like HDTV is now, I recently
bought an HDTV receiver.
It doesn't matter who produced it, I th
> Oops, that's really not so good... one can't comment about HDTV with a
> resolution which is not full HDTV : 1920x1080...
Ok, this means that my setup is a low-end instead of being "average" as I
stated before, therefore my considerations about HDTV was totally wrong.
But to buy a 1000+ Euro T
Did yiu tried xmltv (tv_grab_xx) and xmltv2vdr ?
I'm using it with good results in my country (Hu).
István
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
___
vdr mailing list
vdr@linuxtv.
On Thu, 22 Nov 2007, Gregoire Favre wrote:
> First you could try it on a computer monitor : tremendous !!!
Yes, I did it once, about two years ago, on a 24" CRT monitor I tried
Euro1080, or something like this, it was DVB-S, MPEG2, but unfortunately
my CPU has not enough power to decode it flaw
On Thu, 22 Nov 2007, VDR User wrote:
> Btw, do you still prefer music on cassette tape? ;) (just kidding)
No, I never liked casette tapes. But I prefer LPs instead of CDs...
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_
files) but I cant see any of the red-yellow-green-blue buttons at the bottom
of each OSD menu. Any ideas as of what to start with?
Your OSD area is set to a too high value. Go to Menu/Settings/OSD, and set
a smaller area.
EnigmaNG uses more memory than standard skins and your 2MB onboard memor
> Here is my setup.conf (part of it)
Just try to move your setup.conf from vdr's config dir, and let vdr to
create a plain setup.conf and see if it works.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
__
I recently added to my single-FF-card VDR-box a second card, it's a
TT-S2-3200.
It's working fine with the multiproto dirvers and vdr-1.5.14, i can watch
SDTV on the nexus-s' tv out or HDTV (quite well) via vdr-xine.
I have one issue with my dishes. I know that few of the vdr users have
motoriz
On Sun, 3 Feb 2008, Klaus Schmidinger wrote:
> Should there be a stable version 1.6.0 now, based on what's in
> version 1.5.14, but without DVB-S2 or even H.264 support?
Yes, I think it would be a good idea to have a stable and up-to-date VDR
version in the
main distros based on the kernel
> For the final result all votes given here on the ML and on vdrportal.de
> will be added up.
>
> Klaus
Shall it definitely be 1.6.0?
Can't the 1.5.x improvements (subtitle support, utf, etc) be backported to
1.4 branch and call it 1.4.8?
--
This message has been scanned for viruses and
danger
On Sat, 2 Feb 2008, Füley István wrote:
I have one issue with my dishes. I know that few of the vdr users have
motorized dish, well I have two of them :) The first one, a 1.8m prime
focus is controlled fine with Diseqc 1.2 commands in diseqc.conf. But I
have a second one connected to my S2-3200
On Mon, 4 Feb 2008, Christian Schuld wrote:
On Montag, 4. Februar 2008, Füley István wrote:
Yes, thats true :) But IMHO implementing this feature would require only a few
dozen lines of addtional source code. May be someone else can do it?
Don't look at me ;-)
Lol :) That's
> implemented in VDR. More generally spoken VDR would need a separate
> diseqc.conf for each receiving device.
I know that. But I'm afraid that's not a priority for Klaus, at least not
now when there's a war between features like H.26 and subtitles :)
> To circumvent this situation with current
>> You're absolutely right. But:
>> UPC Direct removed couple of days ago the Czech and Hungarian DVB
>> subtitle from BBC Prime (on S19.2E) and now it only has teletext subtitles
>> :( This means that after about a year I have to install teletext subtitle
>> plugin again.
>
> Did they give any rea
>> I'm not sure about that. At least the ZDF here in Germany uses DVB
>> subtitles now, but I don't think the other broadcasters will follow very
>> fast.
>
> I believe the ARD is also looking into this.
>
> At any rate, using DVB subtitles would be the optimal solution.
>
> Klaus
You're absolute
On Mon, 4 Feb 2008, Christian Schuld wrote:
> During tuning VDR selects the right device using the sourcecaps patch and
> looks up the right diseqc sequence for that satellite source in diseqc.conf.
> It should work right away, if you setup sourcecaps and disqec correctly.
It works :) Both of my
On Wed, 6 Feb 2008, Morfsta wrote:
> Isn't that the fun part of it? I don't watch much TV, but I like
> fiddling and tuning the VDR!
What you said here is absolutely right, i totally agree :)
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to
> I run vdr-xine with the following syntax:
> xine --fullscreen -r anamorphic --hide-gui -V xv -A alsa -D --post
> vdr_video --post vdr_audio vdr://tmp/vdr-xine/stream#demux:mpeg_pes
>
to redirect logging from console:
xine --fullscreen -r anamorphic --hide-gui -V xv -A alsa -D --post
vdr_video --p
Please read the following carefully:
Date: Sun, 17 Feb 2008 15:46:42 +0100
From: Klaus Schmidinger <[EMAIL PROTECTED]>
Subject: [vdr] [ANNOUNCE] VDR developer version 1.5.15
NOTE:
=
This is the final step towards a stable version 1.6.0.
Please report any bugs as soon as possible, so that
> External data source simply need to provide the strings in the
> encoding used on your local system (presumably UTF-8).
>
> Klaus
This is what I did in my xmltv grab process:
iconv --silent --from-code=ISO-8859-2 --to-code=UTF-8
--output=/opt/tigervdr/xmltv/hu-utf.xml /opt/tigervdr/xmltv/all.x
d) any other solution?
X + tvtime, it uses the MPEG2 decoder of the FF card.
István
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxt
Great, it's working :)
I have vdr-xine + ffmpeg. The sound is not perfect, I think the CPU is not
enough (AMD 2350 BE).
Here is a screenshot:
http://www.tigercomp.ro/~ifuley/itvhd.jpg
Thanks for the info, Morfsta.
Istvan
--
This message has been scanned for viruses and
dangerous content by Mai
Hello,
I'm watching this channels about couple of years ago. Here is my
channels.conf :
DEV-STRM-0;BSkyB:12441:VO0S0:S28.5E:27500:2305:2307=eng,2308=eng,2310=eng,2313=eng,2315=eng,2327=eng:2326:0:6880:2:2038:0
DEV-STRM-1;BSkyB:12441:VO0S0:S28.5E:27500:2329:2330=eng,2331=eng:2332:0:6881:2:2038:0
Hello list,
After 4 yeras of SD-VDR I tried to move to HD with my VDR box.
Current hardware:
Asus M3N78-VM with GF9400
Athlon BE2350
TT3200 DVB-S2
Software:
Ubuntu 9.04 x86
S2API drivers from linuxtv.org/hg/v4l-dvb hg
xine-vdpau
xine-ui cvs
plain vdr-1.7.9
I'm mainly focused on S9.0E source, b
On Mon, 9 Nov 2009, Goga777 wrote:
are you using vdr-xine plugin 093 or vdr-xineliboutput ? which version ?
First I used vd-xine-0.9.3. Then I tried vdr-xineliboutput based on this
wiki:
http://www.vdr-wiki.de/wiki/index.php/Ubuntu_VDR_DVB-S2_mittels_Xine_und_VDPAU_-_VDR_Plugins
what about a
your channels list is wrong
wrong modulation - should be everytime S1 and O35 or O25
The channels.conf was as vdr generated it, but I tried different
modifications, so maybe that time I changed the modulation, but it didn't
helped.
read please man vdr about this parameters
Believe me, I read
On Tue, 10 Nov 2009, Gerald Dachs wrote:
I will reinstall Ubuntu 9.04 on this weekend, and I hope that will help.
This is never a good idea, this way you will never find out the reason for
the problem. So there is no warranty that it will not happen again.
Gerald
I agree. But I miss my vdr
Yes, i have signal, as my LNB cable is coming from the Kathrein's
loopthrough, and channels are fine on Kathrein's Enigma2.
I also tried to connect my LNB directly to TT3200, with same results.
I compared Engima2's lamedb channels list to vdr's channels.conf, and I
can see only one difference.
Hello list,
after some unsuccesfull tests with HD-VDR on Ubuntu, I decided to return
to
Opensuse (i'm using it for SD-VDR for about 4 years). I installed a
fresh 11.2 x64 version, compiled v4l-dvb-b8eb9e860545 drivers, installed
NVIDIA-Linux-x86_64-190.32, compiled xine-lib-1.2
patched with
On Tue, 24 Nov 2009, Torgeir Veimo wrote:
and in your .xine/config
# vdpau: HD deinterlace method
# { bob half temporal half temporal_spatial temporal
temporal_spatial }, default: 3
video.output.vdpau_deinterlace_method:temporal
Or whichever method you'd like to try. Not all hardware suppor
On Thu, 26 Nov 2009, Jouni Karvo wrote:
True. I don't know, however, if it is reasonable to request YLE to
change the pids before the actual programme stream starts.
Couple of weeks ago I reported to the Hugarian Hello HD provider,
[1], that they
are not sending the correct encoding for thei
"Left" and "Right" are used to page up/down within long list, and that's
not going to change. However, we could use the Green and Yellow buttons
(and additionally the kPrev and kNext keys) for this.
Klaus
Green and Yellow would be a perfect solution.
István
--
This message has been scanned for
From the VDR's INSTALL file:
"Executing commands before and after a recording:
You can use the '-r' option to define a program or script that gets called
before and after a recording is performed, and after an editing process
has finished.
The pr
I know that some of you (especially Klaus :) ) already own this card, as
a few arrived to dvbshop.
I'm asking you to share some experiences, as I hardly understand german
discussions on vdrportal.
Currently I'm having two VDR machines, one with DVB-S Premium + CRT TV,
and another one with DVB-S2
On 2011.04.19. 20:18, Roland Behme wrote:
"There are no artifacts while zapping around. The picture turns black,
returns and that's it. On 1080i channels there is sometimes a still
picture for 0.5 seconds, but afterwards the picture gets fine again
immediately.
Zapping intervals are around 1-2s
64 matches
Mail list logo
