Hi,
the tuner part of my fullfeatured card ist broken, so I want to buy a
nova card and use this fullfeatured card as output device only.
At the moment vdr tries to use this card also as receiver.
So may it be possible to tell vdr it should use this card only for
output ?
--
Best regards
Die
Hi,
On Mon, Sep 19, Dominic Evans wrote:
> Rather than having VDR emergency exit on this error, is it possible to
> have it just continue?
yes, if you set "EmergencyExit = 0" in the setup.conf file (or via osd
menu).
--
best regards
Dieter
--
I do not get viruses because I do not use MS s
Hello,
I've compiled vdr on alpinelinux 2.5.0 and get a segfault during
start of vdr.
Even without plugins I get this segfault (I didn't apply any patch to
vdr sources).
Vdr was started with the command:
/usr/local/bin/vdr --config=/etc/vdr --epgfile=/tmp/epg.data --grab=/dev/shm
--log=3.1 --mut
Hi,
On Thu, Nov 29, Dominic Evans wrote:
> On 29 November 2012 15:17, Dieter Bloms wrote:
> > does anybody see what is wrong here ?
>
> Your choice of recording? ;)
>
> > #6 0x004eb4e3 in cRecording::cRecording (this=0x2e2c650,
> > FileName=0x2e4c1
Hi Lars,
thank you for the help!
On Fri, Nov 30, Lars Hanisch wrote:
> 32: bool tComponent::FromString(const char *s)
> 33: {
> 34: unsigned int Stream, Type;
> 35: int n = sscanf(s, "%X %02X %7s %a[^\n]", &Stream, &Type, language,
> &description); // 7 = MAXLANGCODE2 - 1
> 36: if (n != 4
Hi,
On Fri, Nov 30, sundararaj reel wrote:
> %a to print a char* is not right. char* is interpreted as double (see the
> compiler warning) . If you want to print the pointer 'description', then
> use %p.
with "esyslog("dbloms: \"%X\" \"%02X\" \"%7s\" \"%p\"", Stream, Type, language,
description
Hi Werner,
On Fri, Nov 30, Dr. Werner Fink wrote:
> On Fri, Nov 30, 2012 at 11:00:52AM +0100, Dieter Bloms wrote:
> >
> > I changed it this way:
> >
> > --snip--
> > 32 bool tComponent::FromString(const char *s)
> > 33 {
> > 34 unsigned in
Hi,
On Fri, Nov 30, Dr. Werner Fink wrote:
> Maybe some more checks are required as if n != 4 this could be that one of the
> variables are not used and therefore not initialized.
>
> Before sscanf() this could be a `memset(language, 0, sizeof(language));' or
> more
> simple a `*language = 0;'
Hi,
I use alpinelinux (2.6.0) 64bit.
When I try to compile vdr I get the following error message:
--snip--
g++ -g -O3 -Wall -Werror=overloaded-virtual -Wno-parentheses -fPIC -rdynamic
audio.o channels.o ci.o config.o cutter.o device.o diseqc.o dvbdevice.o dvbci.o
dvbplayer.o dvbspu.o dvbsubtit
Hello,
I've a vdrserver running with vdr 2.3.8 and satip plugin 2.3.1-GIT-e008ee0.
It works great with a minisatip server 0.7.15.
But it keeps the connection to the minisatip server open all the time,
so the dvb adapter and lnb consumes power every time.
I added the parameter "--detach" to the s
Hello Klaus,
thank you for this release.
On Mon, Jul 08, Klaus Schmidinger wrote:
> - Unused devices can now be put into a power save mode (suggested by Markus
> Ehrnsperger). Device plugins need to implement the new function
> cDevice::SetPowerSaveMode() to make this work.
> - Implemented p
Hello Reinhard,
On Sun, Feb 18, Reinhard Nissl wrote:
> I've had a further look into szap's source how it detects the status
> FE_LOCKED. Attached is an updated tuner patch which now also reports
> details for FE_READ_STATUS.
>
> One difference between VDR and szap regarding FE_READ_STATUS is, t
Hi,
I get a lot of these messages in my logfile.
What does channel 0 mean ?
--snip--
video:~ # grep "timed out while tuning" /var/log/vdr
Mar 6 19:47:54 video vdr: [19313] frontend 1 timed out while tuning to channel
0, tp 212522
Mar 6 19:50:00 video vdr: [19313] frontend 1 timed out while tun
Hi,
On Sun, Dec 23, Simon Baxter wrote:
> Hi. I'm trying to get VDR to send DVB-C audio via the sound card rather
> than via the FF (mono) port.
maybe you will give bitstreamout a try.
http://bitstreamout.sourceforge.net/
I don't know, whether it compiles against current vdr.
--
Gruß
Di
Hi,
On Wed, Dec 26, Morfsta wrote:
> Apologies if this has been covered before but I have been searching
> for info on this, can anyone explain how this works with the TT FF AC3
> Passthrough firmware?
this works for all dvb cards with spdif output. You only have to use
current driver with curre
Hi,
On Fri, Feb 01, Magnus Andersson wrote:
> I have problems with channels that uses high bitrate on Thor 1W. A few
> channels uses between 10-11 Mbit/s mpeg2 and if I use tv-out from FF
> card vdr 1.5.14 the picture glitches and the remote response becomes
> really slow. It can take 10 seconds
-BERA:
900-UNCB:
900 CHAN:Das
Erste;ARD:11836:hC34M2O0S0:S19.2E:27500:101=2:102=deu,103=2ch;106=dd:104:0:28106:1:1101:0
221 video closing connection
video:~ #
--snip--
--
Best regards
Dieter Bloms
--
I do not get viruses because I do not use MS software.
If you use Outlook
Hi,
On Tue, Sep 15, Rolf Ahrenberg wrote:
>> Why is it not possible to show all femon OSD content with the vdr default OSD
>> size? I don't remember that I had to change the OSD size with earlier
>> vdr/plugin versions.
>
> There shouldn't be any problems with the "Duotone" theme, but on the othe
Hi,
I plan to buy the harman kardon avr 435 receiver and want to connect the
pin4 from jumper 2 of my full featured card to it.
Does anybody know if this receiver works with the rev 1.3 card ?
I don't mean the voltage, but the non audio bit problem.
Thank you for an answer !
--
Gruß
Dieter
Hi,
I have two cards in my video server:
Technotrend/Hauppauge WinTV Nexus-S rev2.3)
Hauppauge Nova-S-Plus DVB-S [card=37]
lspci:
01:0c.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio
Decoder (rev 05)
01:0c.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
CK) = 26
open("/dev/dvb/adapter1/demux0", O_RDWR|O_NONBLOCK) = 27
open("/dev/dvb/adapter1/demux0", O_RDWR|O_NONBLOCK) = 28
video:/var/service/vdr #
On Fri, Feb 09, Dieter Bloms wrote:
> Hi,
>
> I have two cards in my video server:
>
> Technotrend/Hauppauge Wi
Hi,
On Sat, Feb 10, Reinhard Nissl wrote:
> > Feb 9 12:02:00 video vdr: [30529] switching device 2 to channel 1
> > Feb 9 12:02:09 video vdr: [30537] frontend 1 timed out while tuning to
> > channel 1, tp 111836
> > Feb 9 12:02:32 video vdr: [30603] ERROR: video data stream broken
> >
> > so
Hi,
On Sat, Feb 10, Reinhard Nissl wrote:
> szap always sends DiSEqC commands, so I'd suggest to use VDR's
> diseqc.conf. It's default section "Full DiSEqC sequence" is identical to
> the tuning sequence that szap uses.
>
> You may want to try the attached szap and VDR patch. You'll then get
> s
Hi,
On Sat, Feb 10, Reinhard Nissl wrote:
> Don't know. But have you tried DiSEqC with VDR (menu Settings - LNB)?
no, because I didn't install any diseqc switches.
I had also an empty diseqc.conf
> You might get similar messages but on the other hand, it might work ;-)
ok, now I have installed
Hi Reinhard,
On Sun, Feb 11, Reinhard Nissl wrote:
> I'd like you to do some further tests by modifying diseqc.conf:
I will do each setup for about 1 week and will see, if I miss some
recordings and let you about the results.
> A) let's remove FE_DISEQC_SEND_MASTER_CMD and FE_DISEQC_SEND_BURST
Hi,
On Sun, Feb 11, Dieter Bloms wrote:
> > I'd like you to do some further tests by modifying diseqc.conf:
>
> I will do each setup for about 1 week and will see, if I miss some
> recordings and let you about the results.
no diseqc setup works stabel for me :(
Also the
Hi,
On Thu, Feb 15, Dieter Bloms wrote:
> no diseqc setup works stabel for me :(
> Also the Full DiSEqC sequence from default diseqc.conf doesn't work
> a few hours after reboot and sometime it doesn't work directly after
> reboot.
> But I can switch the channel with s
Hi,
On Fri, Feb 16, bastlir wrote:
> > vdr can record from senders on V polarisation like sat1, prosieben ...
> > even without reloading the driver.
> > vdr can not record from any sender on H polarisation like ard, zdf ...
> > even with reloading the driver it doesn't work.
> > This explains, th
28 matches
Mail list logo
