[vdr] no image with TeVii S464

Hi, This is probably not a VDR problem, but I guess that here are people who could help perhaps. I use the femon plugin to check the signal, and there is only some 20% of the first line (red), when I test my brand new TeVii S464, and no image. When I replace the card with my old "Technotrend/Hau

Re: [vdr] no image with TeVii S464

El 27/10/13 11:11, Peter Münster escribió: Hi, This is probably not a VDR problem, but I guess that here are people who could help perhaps. I use the femon plugin to check the signal, and there is only some 20% of the first line (red), when I test my brand new TeVii S464, and no image. When I

Re: [vdr] no image with TeVii S464

If you always have a good signal with your Nexus then the problem is not the lnb or cable. BTW, unfortunately the signal meter is unreliable for a lot of cards because they don't follow a standardized metric. It works for some cards, for others it's basically useless. Other things to consider...

Re: [vdr] searching a HW problem

Hello, an additional amplifier for the signal solved the problem. So it was HW related. Best regards & Thanks for the hints, Torsten Am Sonntag, 13. Oktober 2013, 18:14:13 schrieb Torsten Mohr: > Hello, > > i have a VDR up and running, the SW works fine so far (at least i think so). > > So

[vdr] Issue with VDR-2.0.4 and IPTV-2.0.0 plugin

Hi, I've installed IPTV-2.0.0 on VDR-2.0.4 to view IP channels from my DSL provider. No problem on compilation and installation. Unfortunately, I've an issue : - when viewing channels via vdr => sound is OK but video freezes **every** seconds. - when viewing channels via vlc (outside vdr)