On 25/03/2010 20:03, Simon Baxter wrote:
Apart from youe eac3 mods etc, does streamdev _actually_need_ any
patching to work with xbmc pvr-testing2? Or should
http://ppa.launchpad.net/hotzenplotz5/test-vdr-lucid/ubuntu/pool/main/v/vdr-plugin-streamdev/vdr-plugin-streamdev_0.5.0~pre20090706+cvs201
Приветствую, Simon
please try to use this cumulate patch for streamdev-plugin from cvs
http://cobradevil.org/downloads/streamdev-xbmc.patch
or try to use the patched version of streamdev plugin
ftp://elcom.kaluga.ru/pub/downloads/streamdev-2010-02-14.tar.gz
also there's possibility to watch th
Hi list,
can MaxVideoFileSize be greaten than 2000 (or even 0 to disable it).
-- eric
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi,
I've been botten by the 2GB file size split and would like to:
1) create a single file. "cat *.ts" > result.ts does not work well
because if I watch the resulting file with mplayer, i get out of sync
video and sound at the original split location
2) edit the resulting file to remove uneed
On 27.03.2010 12:04, Eric Valette wrote:
> Hi list,
>
> can MaxVideoFileSize be greaten than 2000 (or even 0 to disable it).
In the developer version (since 1.7.3, with some fixes 1.7.5 and 1.7.6)
a single recording file can be 1TB in size.
Klaus
___
On 27.03.2010 12:10, Eric Valette wrote:
> Hi,
>
> I've been botten by the 2GB file size split and would like to:
> 1) create a single file. "cat *.ts" > result.ts does not work well
> because if I watch the resulting file with mplayer, i get out of sync
> video and sound at the original split
On 27/03/2010 12:11, Klaus Schmidinger wrote:
On 27.03.2010 12:04, Eric Valette wrote:
Hi list,
can MaxVideoFileSize be greaten than 2000 (or even 0 to disable it).
In the developer version (since 1.7.3, with some fixes 1.7.5 and 1.7.6)
a single recording file can be 1TB in size.
Hi Klaus,
On 27/03/2010 12:13, Klaus Schmidinger wrote:
On 27.03.2010 12:10, Eric Valette wrote:
Hi,
I've been botten by the 2GB file size split and would like to:
1) create a single file. "cat *.ts"> result.ts does not work well
because if I watch the resulting file with mplayer, i get out of sync
hi,
since I updated from vdr-1.7.11, there is some change in the way H.264
is treated:
With 1.7.11 + xine with vdpau support, I can watch H.264 "HDTV" shows
without problems. Occasionally, there is a small glitch.
But with 1.7.14 + the same version of xine, H.264 (both SDTV and HDTV)
fail. Sy
O
Well I do not understand either but try with smplayer and you will see
strange thing happen (slow motion; out of sync, bad timestand displayed,
...). Each .ts works fine in mplayer, not the result of the cat command.
Note that its VC1 + eac3 (HDTV in france).
Note the error below when trying
Is ff_audio_decoder.c to patch ?
I try but that change nothing.
Le 26/03/2010 13:12, Jose Alberto Reguero a écrit :
> You can add the line:
>
> this->context->request_channels = 2;
>
> in line 247 and 295.
>
> Then you have stereo sound.
>
> Joae Alberto
>
> El Viernes, 26 de Marzo de 2010, zave
On 09.03.2010 20:28, Lars Bla"ser wrote:
> with hdtv there seems to be a problem with the pause funnction in vdr
> (tested with 1.7.10 and 13 with eHD es replay device)
>
> - sdtv (arte) dedicated pause key - ok
> - servus tv hd dedicated pause key - ok
> - arte hd, dedicated pause key, timer is c
anybody got vdr 1.7.14 working with rotor plugin + this patch. It's compiling
without any probs but when I go to rotor menu I cannot select satellite, there
always "position: 0" and it can't be toggled.
regards
Newsy
--- Goga777 schrieb am So, 7.3.2010:
> Von: Goga777
> Betreff: Re: [vdr] r
Приветствую, Newsy
for vdr 1714 and rotor you need install the extension patch + rotor patch
from http://www.forum.free-x.de/wbb/index.php?page=Thread&postID=13727#post13727
for vdr 1714 and reelchannelscan you should install another patch for
reelchannelscan
http://www.forum.free-x.de/wbb/ind
Hi Goga,
I already got rotor plugin patched with rotor-0.1.5-vdr-1.7.13.diff and
I patched vdr 1.7.14 with vdr-1.7.9-rotor.diff manually.
Still suffering that problem
Did I miss something?
regards
Newsy
--- Goga777 schrieb am Sa, 27.3.2010:
> Von: Goga777
> Betreff: Re: [vdr] reelchannelsca
Приветствую, Newsy
> Hi Goga,
>
> I already got rotor plugin patched with rotor-0.1.5-vdr-1.7.13.diff
ok
> I patched vdr 1.7.14 with vdr-1.7.9-rotor.diff manually.
what is vdr-1.7.9-rotor.diff ?
please use extension patch for vdr 1714
http://copperhead.vdr-developer.org/downloads/extensionpa
I was just wondering, if
ifdef PLUGIN
CFLAGS += -fPIC
CXXFLAGS += -fPIC
endif
can now be removed from Make.config.template, as the new Make.global
cares for -fPIC since VDR 1.7.13.
--
Best Regards,
Joachim.
___
vdr mailing list
vdr@linuxtv.org
http
2010/3/27 Goga777 :
> Приветствую, Newsy
>> Hi Goga,
>>
>> I already got rotor plugin patched with rotor-0.1.5-vdr-1.7.13.diff
>
> ok
>
>
>> I patched vdr 1.7.14 with vdr-1.7.9-rotor.diff manually.
>
> what is vdr-1.7.9-rotor.diff ?
>
> please use extension patch for vdr 1714
> http://copperhead.vd
thx Goga for your quick answer but there's no difference after I used extension
patch on a clean vdr 1.7.14.
regards
Newsy
--- Goga777 schrieb am Sa, 27.3.2010:
> Von: Goga777
> Betreff: Re: [vdr] reelchannelscan & rotor plugin for VDR 1.7.14
> An: vdr@linuxtv.org
> Datum: Samstag, 27. März
Приветствую, Newsy
> thx Goga for your quick answer but there's no difference after I used
> extension patch on a clean vdr
> 1.7.14.
how did you use extension patch ? please explain how did you patch rotor, vdr
>
> regards
___
vdr mailing list
vd
> >> I already got rotor plugin patched with rotor-0.1.5-vdr-1.7.13.diff
> >
> > ok
> >
> >
> >> I patched vdr 1.7.14 with vdr-1.7.9-rotor.diff manually.
> >
> > what is vdr-1.7.9-rotor.diff ?
> >
> > please use extension patch for vdr 1714
> > http://copperhead.vdr-developer.org/downloads/extensio
I made a
patch -p1 -i ExtP-NG-vdr-1.7.14-V1.diff
in vdr root dir. then I copied Make.config.template to Make.config, uncommented
rotor =1 line
for rotor I did a
patch -p1 -i rotor-0.1.5-vdr-1.7.13.diff from src/rotor dir.
all hunks succeeded.
regards
Newsy
--- Goga777 schrieb am Sa, 27.3
Hi
with that patch the timeshift works more reliable on slow systems, where 2
seconds are not enough to fill
up the file enough to start replaying
*** menu.c.orig 2010-02-15 13:15:53.0 +0300
--- menu.c 2010-02-15 12:36:58.0 +0300
***
*** 5476,5482
Skins
> I made a
> patch -p1 -i ExtP-NG-vdr-1.7.14-V1.diff
ok
> in vdr root dir. then I copied Make.config.template to Make.config,
> uncommented rotor =1 line
ok
> for rotor I did a
> patch -p1 -i rotor-0.1.5-vdr-1.7.13.diff from src/rotor dir.
where did you take rotor-0.1.5-vdr-1.7.13.diff ? i
yes I already took patch nr. 2 from
http://www.forum.free-x.de/wbb/index.php?page=Thread&postID=13727#post13727
Seems for me like a bug. rotor plugin can't find out which satellite current
channel is.
regards
Newsy
--- Goga777 schrieb am Sa, 27.3.2010:
> Von: Goga777
> Betreff: Re: [vdr] ree
Приветствую, Newsy
> anybody got vdr 1.7.14 working with rotor plugin + this patch. It's compiling
> without any probs but when
> I go to rotor menu I cannot select satellite, there always "position: 0" and
> it can't be toggled.
do you have /etc/vdr/plugins/rotor.conf with filled positions lik
Приветствую, Simon
please try to use this cumulate patch for streamdev-plugin from cvs
http://cobradevil.org/downloads/streamdev-xbmc.patch
or try to use the patched version of streamdev plugin
ftp://elcom.kaluga.ru/pub/downloads/streamdev-2010-02-14.tar.gz
also there's possibility to watch t
thx Goga, this at least helped to find out what is not working. I always used
gotox not gotoposition. When I choose goto position, this method is working,
but gotox is not.
there one thing that's really wierd. After I changed rotor.conf like you
suggested (before I had a 0 for all positions, as
28 matches
Mail list logo
