> How about this: if svdrphosts.conf contains only one single IP number, then
> open the port for only that IP number. Otherwise i needs to be opened
> generally,
This only works if the single line in svdrphosts.conf is 127.0.0.1.
But how about this much simpler solution: if svdrphosts.conf is
m
On 08.01.2010 20:16, Giampaolo Sica wrote:
> Hi Klaus,
>
> in the iso13818-1 (you can find a copy at
> http://neuron2.net/library/mpeg2/iso13818-1.pdf), in the section 2.4.2.2
> Input to the Transport Stream system target decoder, is explained how the
> PCR is used to reconstruct the transport str
On 09.01.2010 11:25, Olaf Titz wrote:
>> How about this: if svdrphosts.conf contains only one single IP number, then
>> open the port for only that IP number. Otherwise i needs to be opened
>> generally,
>
> This only works if the single line in svdrphosts.conf is 127.0.0.1.
>
> But how about th
The problem does not occur if storage is on local disk or if vdr is
verion 1.6.0. So this is seemingly .ts files on an NFS server.
I tried NFS v2,v3 and noac mount option (no client attribute cache), the
error still occurs. I will continue debugging...
/Johan
Johan Andersson skrev:
Not a p
Original-Nachricht
> Datum: Sat, 09 Jan 2010 11:25:29 +0100
> Von: Olaf Titz
> An: vdr@linuxtv.org
> Betreff: Re: [vdr] [Patch] Allow to limit SVDRP port to given IP
> But how about this much simpler solution: if svdrphosts.conf is
> missing or empty, bind to localhost only. (An
I think it is your card that is the problem
http://en.wikipedia.org/wiki/VDPAU shows that is should support up to
VP1, however if you look at mythtv's guide:
http://www.mythtv.org/wiki/VDPAU it starts only at series 8 and newer.
It seems that your card can then only support xvmc for mpeg2 codec o
I got this information from Pertti and it helped me with my sync
problems, but I see your audio.synchronization.resample_mode is set to
on instead of off. Does off make a difference for you?
2009/12/4 Pertti Kosunen :
> Theunis Potgieter wrote:
>>
>> button (jump to a specific time). All the xinel
2010/1/9 Manuel Reimer :
> Original-Nachricht
>> Datum: Sat, 09 Jan 2010 11:25:29 +0100
>> Von: Olaf Titz
>> An: vdr@linuxtv.org
>> Betreff: Re: [vdr] [Patch] Allow to limit SVDRP port to given IP
>
>> But how about this much simpler solution: if svdrphosts.conf is
>> missing or
Hello,
I've attached a second patch. This patch changes VDR's svdrp port handling in
the following way: If only the localhost item is found in svdrphosts.conf, then
the port is attached to "INADDR_LOOPBACK", which makes it impossible to reach
the port from outside. As soon as even one additiona
Sorry to make things complicated, but would it not satisfy everybody
needs if you could bind to an ip address, which could be any one you
specify? For example, I would prefer mine to be bind to my eth0's ip
for internal lan clients to connect, but not accessible via ppp0 for
example.
So I guess wh
On 09.01.2010 13:36, Johan Andersson wrote:
> The problem does not occur if storage is on local disk or if vdr is
> verion 1.6.0. So this is seemingly .ts files on an NFS server.
>
> I tried NFS v2,v3 and noac mount option (no client attribute cache), the
> error still occurs. I will continue debu
Will try it out and let you know...
- Original Message -
From: "Theunis Potgieter"
To: "VDR Mailing List"
Sent: Sunday, January 10, 2010 5:49 AM
Subject: Re: [vdr] vdr-xine - skipping audio & video [RESOLVED]
I got this information from Pertti and it helped me with my sync
problems
Il 09/01/2010 18:10, Theunis Potgieter ha scritto:
> Sorry to make things complicated, but would it not satisfy everybody
> needs if you could bind to an ip address, which could be any one you
> specify? For example, I would prefer mine to be bind to my eth0's ip
> for internal lan clients to conne
> I've attached a second patch. This patch changes VDR's svdrp port
> handling in the following way: If only the localhost item is found in
> svdrphosts.conf, then the port is attached to "INADDR_LOOPBACK", which
> makes it impossible to reach the port from outside. As soon as even one
> additional
On Sat, Jan 9, 2010 at 12:16 PM, Simon Baxter wrote:
> Currently I only have SD content to watch and my Sony Bravia 32V only
> supports up to 1360x668. Any point using vdpau?
If your system can play the content without it, no. VDPAU essentially
provides playback on hardware that otherwise would
Theunis Potgieter Said:
I think it is your card that is the problem
http://en.wikipedia.org/wiki/VDPAU shows that is should support up to
VP1, however if you look at mythtv's guide:
http://www.mythtv.org/wiki/VDPAU it starts only at series 8 and newer.
It seems that your card can then only suppo
2010/1/7 Reinhard Nissl :
> Hi,
>
> Am 07.01.2010 22:09, schrieb Theunis Potgieter:
>
>> I guess I will have to wait for the output device plugins to update
>> before I can start using vdr-1.7.11. Thanks for pointing to the change
>> log :)
>
> Regarding vdr-xine-0.9.3, please have a look at the at
Am 09.01.2010 21:16, schrieb Simon Baxter:
>> Theunis Potgieter Said:
>> I think it is your card that is the problem
>>
>> http://en.wikipedia.org/wiki/VDPAU shows that is should support up to
>> VP1, however if you look at mythtv's guide:
>> http://www.mythtv.org/wiki/VDPAU it starts only at serie
Compilation breaks with the following error:
server/connectionVTP.c: In member function ‘bool cLSTEHandler::Next(bool&)’:
server/connectionVTP.c:303: error: ‘const class cEvent’ has no member
named ‘GetContentsString?’
server/connectionVTP.c:304: error: ‘const class cEvent’ has no member
named
If I watch vdr-sxfe just from a small window, the subtitle and text are
positioned correctly with a good looking font size to bottom of the
screen. But if I watch finish "yle 1" channel which uses dvb subtitles
from fullscreen vdr-sxfe, the subtitle font is small and text is
positioned about
20 matches
Mail list logo
