Hi,
I wanted to get only one another input. But to achieve it I have to buy
at least 2 input UNCOMMITTED switch. But i find only one 2 input
uncommitted switch with price like 8 input uncommited swithc made in my
country (czech republic) and with price of 70% of new motor (rotor). I
think, tha
Yea, what you have is the standard switch and I think it is what is
called uncommitted, but not sure. So what you would need is a committed.
Basicly, you need one that is a different address and only responds to
that address. How many more ports do you need?
OH, and watch out for 1x8 switches.
Hi,
I tried make diseqc command shorter. First function resolution is
S23.5E 11700 V 9750 t v [E0 10 38 F0] W15 t
S23.5E 9 V 10600 t v [E0 10 38 F1] W15 T
S23.5E 11700 H 9750 t V [E0 10 38 F2] W15 t
S23.5E 9 H 10600 t V [E0 10 38 F3] W15 T
S19.2E 11700 V 9750 t v [E0 10 38 F4
After looking back at the specs I am a bit confuse about "commited" and
"uncommited" also. I thought a standard port was uncommited, but 38 is
what I have been using. Someone else may need to jump in, but the 4
commands for the 4 ports for my switch are
[E0 10 38 F0]
[E0 10 38 F4]
[E0 10 38 F8
Hi,
I read "Bus specification" http://www.eutelsat.com/satellites/4_5_5.html
and it isn't still clear for me.
My diseqc.conf file is slightly different from your example, so I
attached it to this mail.
There is example, where mini A and mini B command is used. But i didn't
find anything about t
Not sure if this is what you mean, But for an example, The dishnetwork
dual lnb has a switch in it and responds to F1/F5 vs a standard switch
which would be F0/F4. The standard switch will only respond to F0/F4
while I think the DN switch will respond to ether set. So Putting a DN
dual LNB on a
Hi,
I read, that is posible connect diseqc relay to cascade (one two input
relay and two four input relay for example). I read that not all
receiver are able to use it (linux based, like dreambox are).
I would like to setup one two input relay and one four input relay to
get five input for con