is suspended and vdr left "idle", it will never enter
housekeeping because of the check.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
all the time?
2018-01-18 23:37 GMT+02:00 Klaus Schmidinger :
> On 18.01.2018 21:26, Teemu Suikki wrote:
>>
>> Ok, I did some debugging.
>>
>> First of all, I noticed something weird that perhaps is not even
>> related to this problem. In vdr.c there is a c
se it happens again.
2018-01-18 12:26 GMT+02:00 Klaus Schmidinger :
> On 18.01.2018 08:54, Teemu Suikki wrote:
>>
>> Ok, it might be the same thing.
>>
>> I added some debug as Klaus suggested. After restart, vdr instantly
>> deleted a few directories.. So at
, and does not try
again.
17.1.2018 22.28 "Jouni Karvo" kirjoitti:
> Klaus Schmidinger kirjoitti 17.01.2018 klo 11:59:
>
>> On 16.01.2018 19:44, Teemu Suikki wrote:
>>
>>> Hi,
>>>
>>> I just experienced weird problem. My hard drive became 100% fu
e the
.del directories easily from the command line. After manually deleting
them, disk is now only 85% full.. And that's 4TB drive. :) So there
were quite a bit of .del directories.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@l
doesn't happen daily. It would however be great if it were fixed -
> hopefully we'll get to that point.
>
> _______
> vdr mailing list
> vdr@linuxtv.org
> https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http:/
table way, then this doesn't help and pid changes mustn't be
> ignored.
>
>
>
>
>
> ___
> vdr mailing list
> vdr@linuxtv.org
> https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
VDRfuse
Fuse filesystem to "autoedit" VDR recordings!
(c) Teemu Suikki 2017
Based on the fuse example "passthrough_fh.c"
Latest version:
https://github.com/Zuikkis/vdrfuse
Using:
-
This filesystem can be used to mount the VDR recordings direc
... So, even if the
problem might be started by some error in the stream, it surely should
correct itself? Maybe try retuning with different tuner instead of
throwing 3000 lines of errors to log? :)
2017-11-27 20:04 GMT+02:00 Teemu Suikki :
> I now switched to the open source TBS drivers. They s
> vdr mailing list
> vdr@linuxtv.org
> https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
yes, that's exactly what it means. :) Just bad (or good!) luck.
Yesterday it got stuck three times during the day.
The weather is better today. I think the error is caused by weak signal..
2017-11-27 12:04 GMT+02:00 Klaus Schmidinger :
> On 27.11.2017 09:04, Teemu Suikki wrote:
>>
Klaus Schmidinger :
> On 26.11.2017 19:09, Teemu Suikki wrote:
>>
>> I know I'm replying to a year old thread, but I'm having the exact same
>> problem.
>>
>> I upgraded my system from kernel 3.16.0 to 4.4.0, and also TBS dvb
>> drivers to latest version.
__
> vdr mailing list
> vdr@linuxtv.org
> https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
yself. VDR Manager's biggest problem is the
lack of transcoding, but that would be very difficult to add.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
P-PPA-yavdr-testing-vdr
> Pin-Priority: 1001
>
> Package: *
> Pin: release o=LP-PPA-yavdr-testing-xbmc
> Pin-Priority: 1001
>
> Package: *
> Pin: release o=LP-PPA-yavdr-testing-yavdr
> Pin-Priority: 1001
>
> --- cut ---
>
> And finally run the upgrade:
>
&g
d "duping" is normal a/v sync, what I see is something
different.
This is VDR 2.2.0, and quite recent softhddevice from yavdr ppa:
1:0.6.1rc1.git20150924.1231-0yavdr0~trusty
And the very same hardware worked just nicely with full yavdr install,
with vdr 2.0.x and some old version o
Handling of VDSB should be improved somehow, or at least add some
configuration.
It's annoying if VDR is recording multiple channels, and one channel has
VDSB.. emergency exit at this point will break all the other recordings,
which otherwise would be fine.
Also I think VDR should try tuning to s
Hi!
Is anyone using this patch with Sky Italia? It doesn't work for me.
Also with Sky UK, I have full epg for many channels, but missing for some.
For example ITV1 has 7 days epg, but ITV2-4 have none.
This patch looked so promising at first, but now I'm thinking of changing
back to LoadEPG plug
ut 1, uncommitted switch input 1, use
GotoX positioner)
The file could be scanned in order when finding tuner for given
satellite. That way you could have priorities, so a tuner with
positioner is not "wasted" if some other tuner can tune..
Just my thoughts.. :)
--
Teemu Suikki
http://ww
ista.org/vdr-loadepg-0.2.6.tgz
>
> - Add comand STOP to SVDRP interface
> - Apply patch for correct timezone
>
> Hi, Luca
>
> ___
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listin
o try it, you simply use it like this (e.g.
> from a cron job):
>
> cpepg.pl S13.0E-318-12400-8511 T-318-1-3401
>
>
> regards
> davide
>
>
> 2013/4/18 Teemu Suikki
>
>> Hi!
>>
>> Your patch is slightly broken, perhaps when emailing? There are a few
&g
te, and they have been embedded into the C code
> instead of having to be loaded as separate files.
> ___
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
--
Teemu Suikki
http://www.z-power.fi/
_
>> vdr mailing list
>> vdr@linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>>
>
>
> ___
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi,
this would be very good, thanks! :)
--
Teemu
2013/4/12 lukkinosat :
> On 09.04.2013 09:53, Teemu Suikki wrote:
>> Hi!
>>
>> I might be overlooking something really simple, but I can't figure
>> this out myself. :)
>>
>> I'm trying to send
Hi!
I might be overlooking something really simple, but I can't figure
this out myself. :)
I'm trying to send "red" button to the LoadEPG plugin, to cancel the
scan. In theory, this is just:
svdrpsend hitk Menu 9 Red
(9 is the Loadepg mainmenu entry number)..
However, the above fails if there
, compareTitle, compareSubtitle,
compareSummary, compareDate, catvaluesAvoidRepeat,
compareSummaryMatchInPercent))
Seems to work now. Still needs your earlier patch in epgsearchtools.c of
course.
5.4.2013 5.48 "Teemu Suikki" kirjoitti:
> I tried this, no change..
>
> Then I ad
e
>
>if(maxLength - minLength < 5)
>
> to
>
>if(maxLength - minLength < 5 && matchLimit < 95)
>
> and let me know if it works for you.
>
> cheers,
> Christian
>
>
> Am 04.04.2013 20:04, schrieb Teemu Suikki:
>
> Hi!
>
Hi!
I have vdr 1.7.27 and epgsearch 1.0.1.beta2, from yavdr..
I'm recording "Game of Thrones" from Canal Digital Nordic. The third season
is starting in a few days..
The episodes have no episode name, and the description field simply says:
"(1:10/s3) 3. kausi maailman suosituimmasta HBO-sarjasta
d vdr
won't touch the transponder data anymore.
Still a bit odd that it updated the transponder data.. S13E does not
have TID 7501 in any transponder, so where did the updated data come
from?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailin
er: 3 (0x03) [= 3/4 conv. code rate]
So.. DVB-DescriptorTag's 65 and 67 appear in opposite order! Could it
be that VDR has transponder data still uninitialized when it is
scanning the service id, because 67 is not arrived yet?
--
Teemu Suikki
http://www.z-power.fi/
___
ymbol_rate: 2723840 (= 29.9000)
FEC_inner: 3 (0x03) [= 3/4 conv. code rate]
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
x27;d like to keep channel updates enabled..
Is the transponder sending incorrect data, or what is going on?
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
t; Subcribe.
>>
>
> To what?
>
> Gerald
>
> !DSPAM:**5140aac1168913192934288!
>
>
>
> __**_
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-**bin/mailman/listinfo/vdr<http://www.linuxtv.org
Hi!
Is there any simple audio output device?
I have two sound cards in my system. I would like to use one to play audio
of one tv channel, while the other is used normally with softhddevice.
I can probably hack it with streamdev and some mp3 player, but perhaps some
easier solution is available?
ummary
available."
Perhaps in that case, some random summary is used from some previous scan?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
ay (Canal+ group)
> or SkyBox (Sky - News Corporation, Sky Italy, Sky Uk...) receivers,
> or executes external scripts and load EPG data from file.
>
> Hi, Luca
>
> Forum:
> http://forum.vdr-italia.org
>
> Web:
> http://www.vdr-italia.org
>
>
> _
21.2.2013 10.35 "Klaus Schmidinger" kirjoitti:
>
> So what you're trying to do is to "bond" the two devices in a way that
> only takes into account the antenna position.
> Maybe you could achieve this by changing cDvbTuner::GetBondingParams() in
a way that
> extracts the positioning part from the
I'm replying to an old message, because soon I will have similar setup so
I'm interested. :)
I currently have two tuners with fixed dish to S1.0W, and third tuner with
diseqc motor. I'm using diseqc.conf and the gotoxx patch, it works very
well!
However I'm adding fourth tuner soon. It will be co
lso have chanman-plugin, which works reasonably well, but it also has
the problem that it just shows FTA or crypted, doesn't make a difference
between caid's.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
should be
included in the official release? I think all current diseqc motors have
gotox functionality, so plugins like rotor(ng) are really unnecessary if
gotox works.
--
Teemu
2013/2/12 Ales Jurik
> On 02/12/2013 12:17 PM, Teemu Suikki wrote:
>
>>
>> Hi!
>>
>>
Hi!
I was trying to find source code for the rotor plugin (not rotorng).. all
the links seem to be outdated. Anyone have any version?
I'm really only interested in seeing how the GotoX stuff works. I'm trying
to send gotox command from diseqc.conf, but the dish doesn't move at all.
I have the Eu
x27;t
think this happens very often.
But yes, I agree the patch could be cleaner somehow.
9.2.2013 12.50 "Klaus Schmidinger" kirjoitti:
> On 08.02.2013 14:52, Teemu Suikki wrote:
>
>> Hi!
>>
>> As I mentioned in my previous email, I'm using diseqc.conf to
(!DeviceHasLock)
cCondWait::SleepMs(100);
for (int i = 0; i < NumFilters; i++) {
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
e's duplicate timers on S1.0W.
Is there any way to make frontend1 higher priority, so it would be used
first if it can tune?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
ither in epgsearch or even some separate plugin that scans the
timers and modifies the channels if needed..
Even a separate script (cron job) would work, just scan timers.conf and
modify the channels when necessary?
--
Teemu Suikki
http://www.z-power.fi/
mented (hopefully) properly.
> However, some devices may ignore this pattern. I will try to find out,
> which of these parameters is the offending one.
>
> 2012/2/16 Teemu Suikki :
>> Howdy!
>>
>> There is an installation instructions for vdr-plugin-upnp here:
>>
ordings.
>>
>>
>> Or hack the TV to simply nfs mount the directory with the recordings
>>
>>
>> Bye
>
>
> ___
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinf
like this:
> http://www.fuley.ro:3014/ES/S1.0W-1536-705-30511+1
>
> István
>
>
> On 2011.12.06. 17:00, Teemu Suikki wrote:
>>
>> Hi!
>>
>> I need a mp3 audio stream of live tv channels.. I tried to do it with
>> ffmpeg, but it doesn't work properly. No
Eurosport. :D It's
pretty much useless if there is a minute delay..
--
Teemu
2011/12/6 Johannes Truschnigg :
> Hi there,
>
> On Tue, Dec 06, 2011 at 05:00:24PM +0200, Teemu Suikki wrote:
>> Hi!
>>
>> I need a mp3 audio stream of live tv channels.. I tried to do it
Hi!
I need a mp3 audio stream of live tv channels.. I tried to do it with
ffmpeg, but it doesn't work properly. No data is transferred, I guess
ffmpeg doesn't like to write to a fifo?
Any ideas?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.or
ted lately.. It "worked" but it was quite
unstable.
I ended up buying an used dxr3 card, they only cost a few bucks and
are well supported by dxr3-plugin..
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
n if this
>> results in double recordings.
It would seem that "yes" and "if present" settings should be swapped?
I'm pretty sure "yes" worked like "if present" earlier, because my
timers worked just fine before upgrading..
--
Teemu Suikki
http://
2010/11/10 Dominic Evans :
> On 10/11/10 09:09, Teemu Suikki wrote:
>>
>> Why doesn't it match? The descriptions are 100% identical.
>>
>
> Check your search timer's configuration for comparing 'sub-title' when
> avoiding repeats. Compare subt
istent subtitles, especially if the
comparison always fails?
I think there is a bug in epgsearch.. See epgsearchtools.c line 806:
if ((!compareTitle || Title1 == Title2) &&
(!compareSubtitle || (Subtitle1 == Subtitle2 &&
(compareSubtitle==2 || Subtitle1!=""
ytt lintua. Amerikkalainen komediasarja. 11.
@ 4 -
NelonenFrasier1289337300128934011873
r
-
Why doesn't it match? The descriptions are 100% identical.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://
plugin, though.
Now I have the message display time set at 5 secs and it hasn't frozen
for several days now, so perhaps there's no reason to bother with this
bug. :) Easy fix would be to limit the message display time to 15secs
for example,
on screen?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
t, it just hangs.
Oh, and if I press "OK" on remote after the first message, everything
works. This is why it never hangs when I'm actually watching the TV, I
always press the button quickly enough. :)
--
Teemu
--
Teemu Suikki
http://www.z-power.fi/
_
k pix fmt
ffmpeg works fine with recordings where vdr index generation works too..
Any easy way to fix these somehow?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
tion works, you can press OK and see the timeline
growing as the index is created. When it doesn't work, OK doesn't
bring up the timeline, nothing happens..
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
in 8bpp? I checked both git
versions (master and buffer-and-sync-rewrite) and they also have 8bpp
removed just like above.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
difference between git and your version,
I'll try to diff them.. :)
It's annoying to have two "almost" working versions. :) git version is
fine except for the audio and subtitles, and 0.2.11 is fine except for
the OSD. So now we just need to combine the working features of b
ed a message
>> for h264 encoded channels).
>
> Yep, that's in.
>
> ___
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
>
--
Teemu Suikki
http://www.z-power.fi/
___
Hi!
This is a good idea, I didn't think about that!
I also watch my recordings with PS3, it has good support for H.264 TS too.
--
Teemu
2010/9/5 Rolf Ahrenberg :
> On Sun, 5 Sep 2010, Teemu Suikki wrote:
>
>> So basicly I would like to be able to compress vdr recording to d
enough
to simply launch mplayer-plugin for the file if divx format is
detected? Editing etc is not necessary at all.
This is probably something I can do myself, but I just thought I ask
in case someone else has already done something similar. :)
--
Teemu Suikki
http://www.
etc to single
1.ts... This is because I couldn't make multiple file http
streaming work to ps3, now I don't have to worry about that. :) VDR
supports >2GB anyway if you enable it in the settings.
--
Teemu
2010/8/26 Éric Laly :
> Le 25/08/2010 18:43, Teemu Suikki a écrit :
&
; http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
>
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
. :)
Anyway, now the biggest problem is that I have about 1TB of recordings
recorded with older VDR.. I'd like to convert all of those to TS. :)
Is there some simple shell utility? Writing the actual script is not a
problem, if I just knew what program to use for the conversion.
--
Teemu Suikki
if that patch/hack has any effect on subtitles when used with the git
> version of the plugin.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
s you can see
"unfilled" letters where there's only the white outline and inside is
transparent.. This might be VDR bug actually, I have no idea where the
rendering takes place?
--
Teemu Suikki
http://www.z-power.fi/
its waiting in my local git
> repository. I hope I can find so
so I can't be sure if
it's outputing something there. But I have selected "digital output"
in dxr3 plugin setup.
Also subtitles seem to bug a little, there's a lot of garbage on top
of the text, and sometimes the texts appear in top left corner, not in
bottom like they
full recompile of both..
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
area in recent
versions? So is it likely to fix my problem if I upgrade to latest
developer version for example?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
new
episode, to keep the kids quiet for a while. :)
The recordings-listing doesn't have many buttons assigned for
directories, only "Open".. There could be a command to playback entire
directory, perhaps with some "bookmark" feature so it starts from the
episode that was p
n
for me because I need to watch the same recordings with VDR as well,
and it's not practical to use double space for both .ts and .vdr
formats.. So VDR would need to support TS playback as well.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr ma
2008/5/3 Steffen Barszus <[EMAIL PROTECTED]>:
> Teemu Suikki schrieb:
>
> > 2008/4/29 Steffen Barszus <[EMAIL PROTECTED]>:
> >
> >>> There is a good UPnP server available for linux, called Fuppes:
> >>>
> >> > http://fuppes.u
setup than fuppes,
and has some extra features like http streaming.. But still doesn't
work any better with PS3. :)
I wonder why the http streaming doesn't work, PS3 just reports some
"server error" but logs show that it has actually connected to the
stream jus
2008/5/1 Gavin Hamill <[EMAIL PROTECTED]>:
> On Thu, 2008-05-01 at 21:20 +0300, Teemu Suikki wrote:
>
>
> > I tried loading streamdev urls like http://vdr:3000/TS/3 with PS3
> > browser.. It does understand that it's some sort of stream, but I
> > thin
2008/4/29 Steffen Barszus <[EMAIL PROTECTED]>:
> Teemu Suikki schrieb:
>
> > Has anyone written a direct UPnP/DLNA plugin, to stream out VDR
> > recordings and live TV to PS3 or XBOX 360?
> >
> no something like that doesnt exist. I have used a cron to
stream VDR recordings, but so far I haven't been
able to get live video to work.. And even with recordings you need to
use transcoding because PS3 doesn't like MPEG-PES.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxt
On Thu, 15 Feb 2007, Marko Mäkelä wrote:
> On Thu, Feb 15, 2007 at 04:37:16PM +0200, Teemu Suikki wrote:
> > > > .. Replying to myself.. The problem seems to be in kernel level after
> > > > all, I enabled ir_debug in budget-ci module and the same delay is there
> &g
On Thu, 15 Feb 2007, Laz wrote:
> On Thursday 15 February 2007 11:30, Teemu Suikki wrote:
> > On Thu, 15 Feb 2007, Teemu Suikki wrote:
> > > Why is the user input so slow? When I press a key in remote, there
> > > seems to be a random delay of 0-0.5sec or so.. Sometimes
On Thu, 15 Feb 2007, Teemu Suikki wrote:
> Why is the user input so slow? When I press a key in remote, there seems
> to be a random delay of 0-0.5sec or so.. Sometimes it's fast, sometimes
> not. It's fine in channel switching but really annoying when you a trying
>
priority issue that could be adjusted?
Both boxes use dxr3-plugin as output device, and pretty much identical
software setup (copied over from box1 to box2)..
VDR version is 1.4.5.
--
Teemu Suikki
http://www.z-power.fi
___
vdr mailing list
vdr@l
ent box, but that's not a good
solution. :)
--
Teemu Suikki
http://www.z-power.fi
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
On Wed, 31 Jan 2007 [EMAIL PROTECTED] wrote:
> Teemu Suikki wrote:
> > With only one card installed, both cards work fine. ...
>
> This sounds like an interesting solution... Can you post a link to
> picture showing this particular setup? :-P scnr
Bah. :)
> > It coul
works! Older card is found by VDR and can
tune channels, but there is no picture..
Any ideas?
It could be some hardware issue, if there is some conflict with two
cards.. But I have tried both cards in all PCI slots, no difference there.
:)
--
Teemu Suikki
http://www.z-power.fi
87 matches
Mail list logo
