Hi,
I will ike accentuate the do {}while(0) behavior.
I've seen this in few projects including VDR and at least one plugin
(xineliboutput)
In a code like:
do {
if (condition1)
continue;
} while(condition2);
continue does not translate to a jump to "do", but to a jump to "while"
where t
I have the same problem with xineliboutput (xvdr:tcp://).
I don't remember when it all started but I don't think is related to xine.
This is just a guess, but it may be related to the problem with recordings.
When xine.. plugins worked OK I could record up to 5 channels in the
same time.
Now I
10 38 FF] W100 [E0 11
00] W100 B W15 T
They are in the order of ports on switch.
A non proved explanation is that the LNB needs 100ms to powerup until it can
work.
Regards,
Ilariu
On 1/29/07, Ilariu Raducan < [EMAIL PROTECTED]> wrote:
I'm using VDR4You distribution, and I do
re <[EMAIL PROTECTED]> wrote:
On Mon, Jan 29, 2007 at 01:32:16PM +, Ilariu Raducan wrote:
> I also have problems with 4 quad LNBs on a diseqc switch (1.0 and
another
> 2.0)
> If I plug out the cable from the card and plug it back again (reset
switch
> and LNBs)
> I can use
I also have problems with 4 quad LNBs on a diseqc switch (1.0 and another
2.0)
If I plug out the cable from the card and plug it back again (reset switch
and LNBs)
I can use szap to change the channels. I believe the quad LNBs have diseqc
switch
inside and at reset they are in backward compatible
By the way, the switch is Diseqc 2.0.
If I remove the cable going to the card and plug it back while channel is
set on the port #1 the reception works. After first diseqc command sent to
the switch it doesn't work anymore.
On 1/27/07, Ilariu Raducan <[EMAIL PROTECTED]> wrote:
Hi
Hi all,
Could somebody help me with this one?
I Got 2 Edision switches and 4 quad LNBs to use it with 3 receivers (I still
have the old switch).
With the old switch (not Edision) everything works OK.
With Edision switches no channel locks, the signal is not stable. I presume
the problem is with
Hi,
I'm interested in this kind setup as well.
Please share your experiences !!!
Regards,
Ilariu
On 12/24/06, Karim <[EMAIL PROTECTED]> wrote:
Hi,
I am using two vdrboxes (two FF cards inside each box), and I need to
receive 4 satellites, then I plan to buy :
- a multi-lnb dish "wavefrontier
Hi All,I will like to build a system with 4LNBs and 4 PCI cards using toroidal dish.I want to be able to record from any LNB and watch live in the same time.Could you explain me what is the difference between QUAD and Quatro LNBs?
Can I use 4 (4x1) Disecq switches?What about CI interface?Please sha
the defaults.
ChrisOn Mon, Aug 07, 2006 at 03:49:46PM +0100, Ilariu Raducan wrote:>This also happened to me with vdr-xine if I tried to use xvmc video output>with NVIDIA.>Maybe you need to check if you have xvmc enabled.
>>On 8/7/06, Stefan Lucke <[EMAIL PROTECTED]>
This also happened to me with vdr-xine if I tried to use xvmc video output with NVIDIA.Maybe you need to check if you have xvmc enabled.On 8/7/06,
Stefan Lucke <[EMAIL PROTECTED]> wrote:
On Montag 07 August 2006 05:20, Chris Elsworth wrote:> On Sun, Aug 06, 2006 at 06:45:55PM -0700, CR wrote:> > H
11 matches
Mail list logo
