Dear Community,
I have recently bought two new Ettus N310 and I have started to verify
the connection with the hosts. The NIC interfaces mounted in the hosts
are Intel X520-DA2 and Broadcom BCM57414 NetXtreme-E 10Gb/25Gb.
Unfortunately, the benchmark for both USRP fails or I have errors like
Hi Rob, Marcus,
thank you for your answers.
Yes, I have packet loss with ping and also with iperf3 (considering udp)
at low rates (500Mb, 1Gb).
From the host side I can also see continuous disconnection and
re-connection of the link. For the Intel X520-DA2 NIC, I have bought
Intel SFP+ (E10GS
Yes, errors with UHD benchmarks, ping packet loss and iperf3 packet loss
on both setups.
The patch cables are new and 3mt long (always bought from FS)
Federico
On 27/07/22 18:18, Marcus D. Leech wrote:
On 2022-07-27 12:15, Federico Civerchia wrote:
Hi Rob, Marcus,
thank you for your
:00, Marcus D. Leech wrote:
On 2022-07-27 12:22, Federico Civerchia wrote:
Yes, errors with UHD benchmarks, ping packet loss and iperf3 packet
loss on both setups.
The patch cables are new and 3mt long (always bought from FS)
Federico
Is this two different N310 on two different computers,
Yes, the issue was related to the optical cables in single mode. Using
MMF cables resolved the problem.
Thank you for your support.
Federico
On 28/07/22 21:22, Marcus D. Leech wrote:
On 2022-07-27 11:06, Federico Civerchia wrote:
Dear Community,
I have recently bought two new Ettus N310
fo about this behavior?
Thank you.
Best Regards,
Federico Civerchia
___
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
Hi community,
I am using openairinterface to perform some tests with 5G SA. During the
test phase, I can see a lot of "LLL" (most of the time hundreds,
sometime thousands of these) from time to time. These late packets do
not represent an issue with lower throughput, but if I try to send
Dear community,
I am working with a N310 in a 2x2 MIMO setup. What I noticed is that if
I consider a processor with a base frequency lower than 3.5GHz, I have
several real-time problems with many late packets (s). However, if I
consider processor with 3.5GHz or higher base frequency, this
wrote:
On 17/03/2023 06:47, Federico Civerchia wrote:
Dear community,
I am working with a N310 in a 2x2 MIMO setup. What I noticed is that
if I consider a processor with a base frequency lower than 3.5GHz, I
have several real-time problems with many late packets (s).
However, if I consider
