Hello together,
recently i started RFNoC development using an USRP x310. After finishing
the RFNoC getting started Guide i created an OOT Module including VHDL.
First i simply forwarded the Input Data to the output which worked just
fine. After that i wanted to add a constant, for example 5_dec.,
Hi,
I built the UHD and GRC with no error for a E310 as follow the updated
procedure.
Next I will try to build for E320 and Custom FPGA design.
Thank you.
Regards,
___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/list
Hi,
we have a number b210s that has USB detect problems. We have equipment where
the power can suddenly disappear, and then the system does not come up right
and there is (yet) no programmatic way to resolve the problem, so we have to
get in physical contact with the system.
Any one who knows
Hi Thomas,
let me quickly address a few of these issues
On Tue, 2019-08-06 at 15:40 +0200, Thomas Fabricius via USRP-users
wrote:
> Hi,
> we have a number b210s that has USB detect problems. We have
> equipment where the power can suddenly disappear, and then the system
> does not come up right an
Thanks for the update Michael, I'll pass it along. Fingers crossed.
From: Michael West
Sent: Monday, August 5, 2019 4:49 PM
To: Nate Temple
Cc: Jason Matusiak ; Ettus Mail List
Subject: Re: [USRP-users] E320 unable to lock to external reference
We have someon
In another post, someone was mentioning the warning that is displayed if
there is no block controller for a given rfnoc block. I would like to
suggest that Ettus consider a different solution than providing this
warning. Perhaps if the user could identify a block controller in the XML
file (which
Hi Marcus
No detect = not in lsusb!
The suspision is (more or less) confirmed:
Experiment 1:
-Starting from total power off and no USB cable: Led off
-Turn on PC: Led off
-Plug in USB cable: Led orange to indicate USB power
-Device is in lsusb list (ie. everything is good just from USB power!)
Oh forgot to tell, we do use the Ettus supplied external power supply!
/thomas
-Original Message-
From: Marcus Müller
Sent: Tuesday, 6 August 2019 17.39
To: Thomas Fabricius ; usrp-users@lists.ettus.com
Subject: Re: [USRP-users] b210 USB detect problem
Hi Thomas,
let me quickly addre
-- Forwarded message -
De: Edwin Mauricio Barbosa Salinas
Date: mar., 6 ago. 2019 a las 17:37
Subject: Configurating X300 "uhd_find_devices" No uhd devices found
To:
regards,
I am currently working with a USRP X300, following its UHD and GNURADIO
installation guides, I am making
Dear Edwin,
this usually fails because the USRPs reply with a "where are USRPs
broadcast" from uhd_find_devices with a "here I am broadcast", and
often, these get caught in the firewall or don't get routed through
e.g. NAT.
Since you're using a VM: the X300 can push through a WHOLE lot of data
pe
Hi Thomas,
The switching **should** be really smooth! Also, it shouldn't confuse
either USB end to stop working.
But since we're really debugging this by now, this would be reasonable
to check, yes. Do you happen to have an oscilloscope?
By the way, does the device work with the Vcc-cut USB cable
11 matches
Mail list logo
