Hi,
I got Ettus N200 from my colleague. I din't know the ip address so I did a
reset. After the reset, the ip of N200 became 192.168.10.2 and I was able
to ping and do all regular stuff with it. But whenever I do a power cycle
of the N200, it is undetectable at 192.168.10.2. Then again I have to r
On 06/13/2019 03:33 PM, Sumit Kumar via USRP-users wrote:
Hi,
I got Ettus N200 from my colleague. I din't know the ip address so I
did a reset. After the reset, the ip of N200 became 192.168.10.2 and I
was able to ping and do all regular stuff with it. But whenever I do a
power cycle of the
Hi Marcus,
I just did the following (nothing else). What shall I do after this ? I do
not have the JTAG with me.
*The safe-mode button is a pushbutton switch (S2) located inside the
enclosure. To boot into the safe image, hold-down the safe-mode button
while power-cycling the device. Continue to
On 06/13/2019 03:52 PM, Sumit Kumar wrote:
Hi Marcus,
I just did the following (nothing else). What shall I do after this ?
I do not have the JTAG with me.
_The safe-mode button is a pushbutton switch (S2) located inside the
enclosure. To boot into the safe image, hold-down the safe-mode but
Hi,
we are currently checking out, if we can use RFNoC to develop a simple PHY for
real-time low-latency signal transmission. We have done this before in LabView,
but now we need a small device for mobile applications, and our LV only
supports big USRPs (X310). We are aiming to use the E310 dev
can anyone provide guidance on finding or creating an updated cross-
compile toolchain for the E310? The newest one at
http://files.ettus.com/e3xx_images/ won't build recent uhd because of
an old cmake and probably more.
___
USRP-users mailing list
USR
