Hi
We want to use X310 and Single TwinRX for our DF application. I have few doubts
1. For getting DF of 1 mS duration signal in 80 MHz IFBW, what should be my
interface speed requirement? Gigabit Ethernet is sufficient or I should go with
Express card or 10 GigE inetrface.
2. Whether two channe
Hello Arun Verma:
We have an example of a four-channel Direction Finding system based on
MUSIC using one X310 and two TwinRX. You could probably adapt this to two
channels, but the performance would not be as good. The system uses 1 Gbps
Ethernet, as the sample rate and bandwidths used are not tha
Thanks, I'll try to run it on some intel hardware ("Ettus Research
recommends using the Intel Series 7, 8, and 9 USB controllers.") as well as
on Linux.
Concerning my question on SC12, namely which UHD version can I use, does
anyone know?
On Mon, Aug 27, 2018 at 10:51 AM Marcus D. Leech via USRP-
On 09/03/2018 12:11 AM, RizThon wrote:
Thanks, I'll try to run it on some intel hardware ("Ettus Research
recommends using the Intel Series 7, 8, and 9 USB controllers.") as
well as on Linux.
Concerning my question on SC12, namely which UHD version can I use,
does anyone know?
SC12, SC16, SC8
Hi all,
I am using USRPN200. I have a query related to the signal repetitions
related to sample rate. here is the problem.
1. I set USRP center frequency at 5 MHz.so, getting a spectrum from 0 to 5
MHz when center frequency is 2.5 MHz (Complex signal analysis).
2. I tuned at 1MHz for baseband signa
I am running a cross-compiled UHD environment on a E310. I have a couple
warning that appear when I am running my uhd_usrp_probe with a custom FPGA
image. The image I have created has 2 FFT’s and 2 Windows in it. The warning
indicate that the controller blocks cannot be found for the FFT’s.
