I'm struggling with an easy task: get USRP B200mini working with my code.
I'm using windows 10 x64 and visual studio 2017, I downloded and compiled
boost 1.67.0 (both 32 and 64 bit). I used udh.dll from UHD 3.12.0.0 and
GNURadio-3.7.
I followed the simple guide but it's not working, even this sm
Hello.
I'm trying to install RFNOC on USRP E313
When installing RFNOC on the E313 board, the following occurs:
Can anyone faced this problem tell me how it can be solved?
Thank you in advance
root@ettus-e3xx-sg3:~/newinstall# uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 4.9.2; Boost_1057
The output samples file is parsed into raw i/q values and plotted in gnuplot.
Currently, the loopback is done via just direct RF cable between RF0 TX/RX
radio and RF1 RX2 radio with 30 db of attenuation inline.
Lenny
From: "Marcus D. Leech"
Date: Tuesday, July 17, 2018 at 8:54 PM
To:
On 07/18/2018 09:57 AM, Veytser, Leonid - 0665 - MITLL wrote:
The output samples file is parsed into raw i/q values and plotted in
gnuplot.
Currently, the loopback is done via just direct RF cable between RF0
TX/RX radio and RF1 RX2 radio with 30 db of attenuation inline.
Lenny
So, try t
I just tried a separate computer and pulled the latest from Master (w/o
using -DENABLE_RFNOC=ON during cmake). Then I ran images_downloader and
image_loader and rebooted N310. Same bad result as indicated previously
(see 1st result below). Then, without changing anything, I used a 3.11
version (
On 07/17/2018 01:50 PM, Moritz Fischer via USRP-users wrote:
> Philip,
>
> On Fri, Jul 13, 2018 at 8:03 AM, Philip Balister wrote:
>> A couple of notes based on updating the E300 to rocko
>>
>> 1) The N310 branch added a bbappend on something called salt which added
>> the need for the meta-
Hi Philip,
On Wed, Jul 18, 2018 at 9:33 AM, Philip Balister wrote:
> On 07/17/2018 01:50 PM, Moritz Fischer via USRP-users wrote:
>> Philip,
>>
>> On Fri, Jul 13, 2018 at 8:03 AM, Philip Balister wrote:
>>> A couple of notes based on updating the E300 to rocko
>>>
>>> 1) The N310 branch add
I switched from using txrx but instead took an arbitrary waveform generator
that I have and was able to generate a sine wave there and see it on N310. I
did have to bump up the receive gain though. Not sure what the problem was with
transmitting the waveform from the N310 but since I am only con
On 07/18/2018 03:55 PM, Veytser, Leonid - 0665 - MITLL wrote:
I switched from using txrx but instead took an arbitrary waveform
generator that I have and was able to generate a sine wave there and
see it on N310. I did have to bump up the receive gain though. Not
sure what the problem was wit
Hello,
Is there a non-invasive way to monitor a debug register in the b205mini
FPGA, with minimal/no changes to software. To give some background, I am
looking at making some changes to the B205 mini HDL and trying to see if I
can use an existing debug/unused register for debug purposes. I am try
The problem seems to be that the "NumChains" input for the DUC (& likely
DDC) is not being set and thus defaulting to 1 chain per DUC. This is a
problem for the N310 that has 2 channels per radio. I noticed that the
file rfnoc_ce_default_inst_n310.v has NumChains specified as
NUM_CHANNELS_PER_RA
11 matches
Mail list logo
