Hi,
The file_source and file_sink blocks (and corresponding RFNoC blocks) are
only useful for simulations. File I/O is not a sythensizable operation.
Jonathon
On Thu, Apr 5, 2018, 7:17 AM Xingjian Chen via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hi there,
>
> I find the "file_source"
Hello Matis,
Can you turn on full UHD logging and pastebin the output?
Jonathon
On Fri, Apr 6, 2018, 4:28 PM Matis Alun via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Le 05/04/2018 à 16:29, Marcus D. Leech via USRP-users a écrit :
>
> On 04/05/2018 04:55 AM, Matis Alun via USRP-users wr
Hi Marcus,
No, I haven't fooled with LO level adjustments. I set the LO at about 3
dBm and did not change it. The LO freq is indeed 2x (LO at 4884MHz with
center freq at 2442MHz). I suspect that my custom software, which was
developed for first B210 and then X310 with several daughterboard varia
On 04/07/2018 10:39 AM, Rob Kossler wrote:
Hi Marcus,
No, I haven't fooled with LO level adjustments. I set the LO at about
3 dBm and did not change it. The LO freq is indeed 2x (LO at 4884MHz
with center freq at 2442MHz). I suspect that my custom software,
which was developed for first B21
Hi Rob. You are specifying use of the RX external LO correctly via device
arguments. Each of the daughtercards on the N310 contains a single Analog
Device AD9371 2 TX x 2 Rx RF integrated transceiver. The two Tx channels
share an LO and the 2 Rx channels share an LO. Consequently, the TX or R
