Hi Snehasish,
You should not be using a Throttle block when you have any actual hardware
within the flowgraph.
Note, in order to write 200 MS/s to disk, you'll most likely need a PCIe based
SSD, or SSD Raid configuration. I've had success with an Intel 750 Series PCIe
based SSD to write 200 MS
Thanks Nate,
I will try that an let you know.
BR
Snehasish
From: Nate Temple
Sent: Monday, August 28, 2017 1:25:58 PM
To: Snehasish Kar
Cc: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Support with handling data at 200MSPS from NI USRP
2954R
Hi Sne
Hello
My device is b210 version of UHD is 3.9.5 OS Windows7.
I work with this device in dual channel mode.Occasionaly after call function
sampler_recv I have uhd_rx_metadata_error_code_timeout error.When the number of
errors exceeds a certain number (usually 9) аll further calls for reading data
Hi,
How consistent is B200mini can be in terms of signal amplitude if I restart the
board? I am sending and getting chirp pulses at the same time by a B200mini. I
found that if I restart the board every time before the loopback measurement,
and comparing pulses between measurements, the amplit
On 08/28/2017 10:17 AM, Xingjian Chen via USRP-users wrote:
Hi,
How consistent is B200mini can be in terms of signal amplitude if I
restart the board? I am sending and getting chirp pulses at the same
time by a B200mini. I found that if I restart the board every time
before the loopback mea
On 08/28/2017 05:49 AM, Андрей 1 via USRP-users wrote:
Hello
My device is b210 version of UHD is 3.9.5 OS Windows7.
I work with this device in dual channel mode.Occasionaly after call
function sampler_recv I have uhd_rx_metadata_error_code_timeout
error.When the number of errors exceeds a c
Hi,
I am installing gnuradio/rfnoc on a Ubuntu 14.04 machine using Pybombs.
Everything goes well until it starts to install uhd-fpga, and the first thing
it tries to do here is install pyqt5 (PyQt 5.6). When configuring the pyqt5
package, it says "Configuration failed. Re-trying with higher v
Hi Dixon,
it might be worth trying installing pyqt5 from source, as it seems not to
be packaged for Ubuntu 14.04
-N
On Mon, Aug 28, 2017 at 7:08 PM, Dixon, James L via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hi,
>
> I am installing gnuradio/rfnoc on a Ubuntu 14.04 machine using Pybomb
Hi,
After some testing it turned out that when creating a rfnoc block that sends
timestamps for packets, the output stream is not tagged.
The patch below solves the issue and also removes the annoying timeout message
that comes out whenever a block is not sending data so often.
Hope this helps an
Hello,
When setting the send_frame_size or recv_frame_size in a usrp source for an
x310, it sets them both the minimum of the two. Is this expected behavior?
This seems to be behavior stemming from x300_impl::determine_max_frame_size
in host/lib/x300/x300_impl.cpp where the receive and send size
10 matches
Mail list logo
