Dave,
I might be miss-reading what you are telling me here but…..are you saying that
an “HG” image brought up both ports over a 10G Twinax passive cable to the
X710, but not the “XG” image? Is it possible either you or someone at Ettus has
got HG and XG switched in the latest release? Can you us
Ian,
I take that back. I didn't realize the other X310 was on the HG
image. Once I updated it to the XG image port 0 stopped working properly.
No matter what combination of cable arrangements I use, port 0 just does
not want to come up even on the spare X310.
I don't have another syst
Ian,
I forgot to mention that I did test to see if the cable was at fault.
I swapped the cables and still only got a link on port 1. Using either
cable to either port on the NIC from port 0 on the radio results in no link
for several minutes. The light on the radio port immediately comes on
Dave,
I can’t speak to anything that might be happening because of recent code
changes, but I would recommend you doing a quick switch of the cables/ports to
see if the problem follows the cable/SFP/Port jut in case it’s a coincidence
that you did the firmware update at that time. I’ve had prob
