Hello Alice,
A single 10 GigE connection should be able to carry two channels of 100
MS/s. Here is a link to some advice for tuning the Ethernet performance of
your computer.
http://files.ettus.com/manual/page_transport.html
Your current program has no use of timed commands so the phase offset wi
Hi Derek,
thank you for your answer. My answers are below.
Il 15/06/18 13:08, Derek Kozel ha scritto:
Hello Alice,
I think you have two different issues. You should not be encountering
Late errors. How do you schedule your timed commands? What connection
to the host computer are you using?
Hello Alice,
I think you have two different issues. You should not be encountering Late
errors. How do you schedule your timed commands? What connection to the
host computer are you using? 10 GigE should be able to handle 100 MS/s, are
you using 1 GigE?
Separately, there will always be a phase of
Hi all,
I have to transmit two flows with the same "start trigger".
I used one USRP X300 with two channels, but because of the large
bandwidth (100MHz), there is the L error.
So, I tried to use two USRPs X300 with the OctoClock, but when I record
the transmitted signal they are not synchroni
