Hi Austin,
>Is there a way to do it directly via the jtag and using the screen command
to speak with the N310?
You could connect to the ARM via JTAG as detailed in the link below, but
you're better off just SSH'ing into it.
https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide#Conn
Let’s do some quick math, shall we?
5msps with 16-bit complex == 160Mbit/second
1.25msps with 16-bit complex samples == an additional 40mbit-second
Unless you have super reliable 1Gig wireless infrastructure, this just isn’t
going to work.
Sent from my iPhone
> On Jan 28, 2020, at 6:23 PM, A
Hey Nate,
Thanks for the quick response as always! I tried editing those files in the
past, but I remember having issues because they were locked or I wasn’t able to
actually save any changes that I made. Is there a way to do it directly via the
jtag and using the screen command to speak with th
Hi Austin,
The MTUs on your host and N310 must match. You should modify the systemd
configuration on the N310 are restart the whole device or restart
systemd-networkd
https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide#Updating_the_Network_Configurations
It is not recommended to
Hi everyone,
I have a very basic GNU script with just a USRP block and a time sink that
when I run, there are tons of streaming errors with the tx and rx. In GNU,
the console is being filled with 'D's and the console for the N210 is
getting filled with 'U's and 'S's.
My setup is just a USRP N210 c
