I used the external power input on the B210.
Sent from my iPhone
> On Nov 4, 2020, at 12:13 PM, David Evans via USRP-users
> wrote:
>
> I too was able to sustain around 12Msps on an XU4+B200mini, and was also
> able to get OpenBTS to work.
> Marcus, hope it's OK to ask, but did you use a U
I too was able to sustain around 12Msps on an XU4+B200mini, and was also
able to get OpenBTS to work.
Marcus, hope it's OK to ask, but did you use a USB3 hub? When I tried it
the XU4 was unable to supply enough current, causing the SDcard to get
corrupted (I had a lot of fun with this!), the sol
On 11/03/2020 02:19 PM, Luke Stutters wrote:
I have only succeeded in running a B210 on a Raspberry Pi at lower
data rates (closer to 12MS) so your experience is consistent with mine.
In certain very-simple DSP flows, I've achieved 14Msps on an Odroid
XU4--which is spec-similar to the Rpi4 B.
I have only succeeded in running a B210 on a Raspberry Pi at lower data
rates (closer to 12MS) so your experience is consistent with mine.
On Tue, 3 Nov 2020 at 17:20, Marcus D. Leech via USRP-users <
usrp-users@lists.ettus.com> wrote:
> On 11/03/2020 10:49 AM, Alvaro Pendas Recondo via USRP-user
On 11/03/2020 10:49 AM, Alvaro Pendas Recondo via USRP-users wrote:
Hello,
I am using a USRP B200mini with a sampling rate of 40MS that works
perfectly fine connected to a laptop with USB 3. However, when I
connect it to a Raspberry Pi 4 (which has two USB 3 ports) and I run
the example bench
Hello,
I am using a USRP B200mini with a sampling rate of 40MS that works
perfectly fine connected to a laptop with USB 3. However, when I connect it
to a Raspberry Pi 4 (which has two USB 3 ports) and I run the example
benchmark_rate with the same sampling rate I get the output that I copy
below.
