Useful to know. Thanks Dario.
From: Dario Pennisi
Sent: 14 October 2017 08:50:31
To: usrp-users@lists.ettus.com; Andrew Thommesen
Subject: Re: [USRP-users] RFNoC Block with 2 inputs and 1 output
You may want to check
this:https://www.mail-archive.com/usrp-users
_
From: Dario Pennisi
Sent: 13 October 2017 19:32:33
To: usrp-users@lists.ettus.com; Andrew Thommesen
Subject: Re: [USRP-users] RFNoC Block with 2 inputs and 1 output
Hi Andy,
As I wrote you have to check available bandwidth. For x310 input data is 32
bits at 160 MHz whereas radios run by
rom a WBX daughtercard..
Andy
From: Dario Pennisi
Sent: 13 October 2017 19:32:33
To: usrp-users@lists.ettus.com; Andrew Thommesen
Subject: Re: [USRP-users] RFNoC Block with 2 inputs and 1 output
Hi Andy,
As I wrote you have to check available bandwidth. For
Is it possible
to enable both streams at the same time?
Andy
From: Dario Pennisi
Sent: 12 October 2017 04:54:00
To: usrp-users@lists.ettus.com; Andrew Thommesen
Subject: Re: [USRP-users] RFNoC Block with 2 inputs and 1 output
Hi Andy,
Same issue here and you
From: Dario Pennisi
Sent: 12 October 2017 04:54:00
To: usrp-users@lists.ettus.com; Andrew Thommesen
Subject: Re: [USRP-users] RFNoC Block with 2 inputs and 1 output
Hi Andy,
Same issue here and you can probably find a set of emails form me in this list
that went unanswered. I spent
Hi Andy,
Same issue here and you can probably find a set of emails form me in this list
that went unanswered. I spent quite some time debugging this just to find out
that apparently this is not supported. The issue in my opinion is that sofware
does not initialize the streamer for the second inp
Hi all,
I am trying to create a custom RFNoC block with 2 inputs and 1 output. I have
attached my block code as well as the XML files for the UHD and GNU radio
integration. The block behaves as expected when I run the testbench. However,
when synthesised and used within the GNU radio flowgraph
