3 AM
To: Cho, Daniel J (332C)
mailto:daniel.j@jpl.nasa.gov>>
Cc: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Subject: Re: [USRP-users] PPS sync with USRP E310 timeout error
Hello Daniel,
There is no check in your code to confirm that the time is correctly set. T
sn’t, how do I know that the sync is set correctly without
> using a spectrum analyzer?
>
>
>
> Thanks
>
>
>
> *From:* Derek Kozel [mailto:derek.ko...@ettus.com]
> *Sent:* Wednesday, August 2, 2017 7:33 AM
> *To:* Cho, Daniel J (332C)
> *Cc:* usrp-users@lists.e
To: Cho, Daniel J (332C)
Cc: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] PPS sync with USRP E310 timeout error
Hello Daniel,
There is no check in your code to confirm that the time is correctly set. The
1PPS signal should be a square wave rather than a sine wave. It is a logic
signal
Hello Daniel,
There is no check in your code to confirm that the time is correctly set.
The 1PPS signal should be a square wave rather than a sine wave. It is a
logic signal rather than an RF one and the sync port is designed to handle
it.
http://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_hw_
Hello -
I am using 2 USRP E310 which I would like to frequency sync together. I am
using a frequency generator which is generating a 1 PPS (1Hz sine wave) signal
which I put through a power splitter to provide both USRPs with the same 1 PPS
signal. I configured the rx_samples_to_file and tx_s
