Dear Marcus,
Kindly help me with step by step procedure if possible. You mentioned :
1\.) Make sure `uhd_usrp_probe --args 'arguments as specified in srsRAN'` works
(please \
redirect the output into a file and attach that!). The arguments, if any, are
specified in \
your srsran config under `r
.
\[WARNING\] \[0/Radio#0\] Attempting to set tick rate to 0. Skipping.
3) \[ERROR\] \[UHD RF\] std::bad_alloc
4) Error timed out while receiving samples from UHD.
5) Error calling srsran_ue_sync_work()
If anyone have already solved these errors, kindly help me. Thanks in advance.
Regards,
Purva
Dear Users,
I successfully detect my device and device does not show any error. Many many
thanks to all. Thank you.
___
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
Dear All,
After solving the FPGA image, I am facing another problem with MPM mismatch.
Here is the output:
uhd_usrp_probe
\[INFO\] \[UHD\] linux; GNU C++ version 9.4.0; Boost_107100;
UHD_4.0.0.0-240-gb38c9d83
\[INFO\] \[MPMD\] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168
Is it possible to use mender for updating the FPGA image?
___
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
Okay Marcus. But can you tell me by this?
dmesg | tail
\[16455.386469\] usb 1-2: USB disconnect, device number 6
\[16455.719386\] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
\[16455.740149\] usb 2-2: LPM exit latency is zeroed, disabling LPM.
\[16455.741072\] usb 2-2: New USB de
Hi Marcus,
Kindly check here.
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop07:00 4K 1 loop /snap/bare/5
loop17:10 63,3M 1 loop /snap/core20/1828
loop27:2046M 1 loop /snap/snap-store/638
loop37:30 49,9M 1 loop /snap/snapd/18357
loo
Hi Marcus,
I solved the BIOS problem. But again there is a new problem with “Failed to run
enumerate_rfnoc_blocks()” Kindly check the following:
>>uhd_usrp_probe
\[INFO\] \[UHD\] linux; GNU C++ version 9.2.1 20200304; Boost_107100;
UHD_3.15.0.0-2build5
\[INFO\] \[MPMD\] Initializing 1 device(
Perfect Marcus. Many thanks for your honest feedback. I will follow the steps
you mentioned. According to my knowledge, my system have /dev/sda for the last
lines. Still, I will share the output of my “dmesg”.
___
USRP-users mailing list -- usrp-users@l
You are right Marcus, I just messed up my boot partition, but I am not able to
fix this issue, I need to wait for the system manager to solve this stuff.
I know it is nothing related to UHD. But how to find the right device if I want
to update the image?
Dear Marcus,
Many thanks. When I tried to update the image to my SD card on my host PC, my
PC stopped working as it showed me an error for BIOS UEFI Utility boot mode.
Once, I will fix this bug, I will try your solution and Let you know soon.
However, thank you for your always support.
___
Dear Marcus,
Here, there is one issue, I tried everything to solve the error. May be you can
help me to solve the problem.
“Error: rpc::timeout: Timeout of 2000ms while calling RPC function
'set_device_id'
Kindly help me in this issue.
___
USRP-use
Many many thanks Marcus. You are really great. I can find my device.
The output of “uhd_find_devices” is
\[INFO\] \[UHD\] linux; GNU C++ version 7.5.0; Boost_106501;
UHD_4.0.0.0-240-gb38c9d83
\--
\-- UHD Device 0
\--
Output of ifconfig:
**enp1s0f0: flags=4163 mtu 9000**
**inet 192.168.20.2 netmask 255.255.255.0 broadcast 192.168.20.255**
**inet6 fe80::f19:8894:c467:688d prefixlen 64 scopeid 0x20**
**ether f8:f2:1e:41:49:d4 txqueuelen 1000 (Ethernet)**
**RX packets 6
Dear Marcus,
Sorry for late reply. I have connected USRP through SFP0 port using 10Giga
Ethernet card. For pinging, I have set the IP address by manually, which is as
per guidelines of ETTUS “Getting started Guidelines”. It is new device, but my
professor used this device before in Ubuntu 16.04
Many thanks marcus. Here is the result for uhd_usrp_probe --args
"addr=,type=n3xx,product=n310"
Error: LookupError: KeyError: No devices found for ->
Device Address:
addr:
type: n3xx
product: n310
___
USRP-users mailing list -- usrp
Dear All,
My name is Purva Joshi. I am using USRP N310 from Ettus Research. I am not able
to find my device. I am using Ubuntu 18.04 with UHD version 4.0. From physical
set up, I have everything ready. If I ping for the USRP IP it gives me positive
response and from "ifconfig" comm
Dear All,
My name is Purva Joshi. I am using USRP N310 from Ettus Research. I am not able
to find my device. I am using Ubuntu 18.04 with UHD version 4.0. From physical
set up, I have everything ready. If I ping for the USRP IP it gives me positive
response and from "ifconfig" comm
18 matches
Mail list logo
