an find a sensible solution on what to put on the SDR peripheral
> device itself, and what to do on your PC?
>
> Best regards,
> Marcus
>
> On Thu, 2018-06-28 at 15:56 -0700, Peter Sanchez via USRP-users wrote:
> > Thank you
> >
> > On Thu, Jun 28, 2018 at 2:01 PM,
rastructure.
>
> -Ian
>
> > On Jun 28, 2018, at 1:47 PM, Peter Sanchez via USRP-users <
> usrp-users@lists.ettus.com> wrote:
> >
> > Hi All,
> > Is it possible to generate RFNoC blocks for the B210? I can't find a lot
> of information about it.
Hi All,
Is it possible to generate RFNoC blocks for the B210? I can't find a lot of
information about it. Can some one show me the URL if there is a website
talking about it?
Cheers
___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ett
ond time, it hangs and nothing gets through the
>> SplitStream.
>>
>> On Wed, Jun 6, 2018 at 7:05 PM, Peter Sanchez via USRP-users <
>> usrp-users@lists.ettus.com> wrote:
>>
>>> Hi All,
>>>
>>> I have a RFNoC Receiver --> Split stream
Hi All,
I have a RFNoC Receiver --> Split stream --> x2 DDC blocks on the X310.
I see a ton of overrun on chan 0 errors after adding the Split Stream block
and GNU Radio Companion eventually crashes all together.
I read about a similar problem on the E310 and the fix was to change the
ce_clk to
Quick update. Still no fix but if I put a Null Source instead of the RFNoC
Radio block for the RX side, now I get the following error.
RuntimeError: On node 0/DDC_0, input port 0 is already connected.
The error has moved from the output port of the Radio block to the input
port of the DDC.
Is ther
Hi all,
I want to transmit using a Signal Source + UHD USRP Sink on Channel A,
while receiving using RFNoC Radio + RFNoC DDC on Channel B. The USRP Sink
block has Mb0 Subdev Spec set to A:0. The RFNoC Radio has Radio Select
set to B. Attached a picture of the flow graph.
If I disable the RX blo
Hi All,
Tutorial aside, I was running the rfnoc_fir example from GNU Radio
Companion. At 10M sample rate, the example works with no errors. At 50M
sample rate the graphs show data while the terminal prints "overrun on chan
0" errors, then eventually the graphs freeze and the terminal prints
"timeou
n Wed, May 23, 2018 at 7:10 AM, Jon Pendlum wrote:
> Hi Peter,
>
> Does the testbench you make as part of the tutorial work?
>
> Jonathon
>
>
> On Wed, May 23, 2018, 12:09 PM Peter Sanchez via USRP-users <
> usrp-users@lists.ettus.com> wrote:
>
>> Hel
