[USRP-users] Re: X440 Tx and Rx Power Constraints

7, 2024 3:59 PM To: Kaya, Altug ; Panuski, Patrick ; usrp-users@lists.ettus.com Subject: RE: X440 Tx and Rx Power Constraints Hi Altug, hi Patrick, The explanations by Patrick make sense to me. The MMPX connectors were required to fit the available space, although they may not be as rigid a

[USRP-users] Re: X440 Tx and Rx Power Constraints

operating%20in%20loopback%20configuration) can certainly clear this confusion. From: Panuski, Patrick Sent: Thursday, August 1, 2024 8:31 PM To: Kaya, Altug ; usrp-users@lists.ettus.com Subject: RE: X440 Tx and Rx Power Constraints Hi Altug, 1. Have you tried setting your converter rate t

[USRP-users] X440 Tx and Rx Power Constraints

Dear USRP Mailing List Members, I have two questions regarding power constraints of X440: 1. I set the master clock rate to 360 MHz and made sure that the converter rate becomes 2.88 GSps instead of 1.44 GSps. I used an UHD example called "tx_waveforms" to verify the maximum output power.

[USRP-users] Re: X440 RF-DAC Distortions

UHD chooses RF-DAC Mix Mode. Thank you for the clarification. Best regards, Altug From: Martin Braun Sent: Tuesday, July 23, 2024 11:41 AM To: Kaya, Altug Cc: usrp-users@lists.ettus.com Subject: Re: [USRP-users] X440 RF-DAC Distortions It depends on the frequency you chose. UHD will switch

[USRP-users] X440 RF-DAC Distortions

Dear USRP Mailing List Members, I would like to design a RF Front-End for the X440. I will limit the operations of the receiver part to Nyquist Zone 1&2 by bandpass filters and converter rate selection. However, I got confused in the transmitter side as I couldn't determine which RF-DAC mode (

[USRP-users] Re: Building UHD From Source With Enabled DPDK

30, 2024 8:56 AM To: Kaya, Altug Cc: usrp-users@lists.ettus.com Subject: Re: [USRP-users] Building UHD From Source With Enabled DPDK Hi Altug, This issue might be related cmake version. Which version of cmake you are using? From the uhd/host/cmake/Modules/FindDPDK.cmake file, set

[USRP-users] Building UHD From Source With Enabled DPDK

Dear USRP Users Mailing List Members, I am following the guide called "Getting Started with DPDK and UHD - Ettus Knowledge Base" in order to run applications on USRP X440 with DPDK. As it is recommended, I installed DPDK