Hi Marcus,
Yes, it is a loopback through computer. I have 3 threads (in addition to the
DPDK threads):
Thread1 : Read from UHD into a circular buffer A
Thread2: Read from circular buffer A, minimal processing, write to circular
buffer B
Thread3: Read from circular buffer B, write to UHD
T
Thanks Brian, yes, this is true. I just checked it.
From: Brian Padalino
Sent: Friday, 03 March 2023 17:46
To: Kevin Williams
Cc: gw...@trabucayre.com; bas.vermeu...@molex.com; usrp-users@lists.ettus.com
Subject: Re: [EXTERNAL][USRP-users] Re: What do I need to do to make
uhd_usrp_probe see
On Fri, Mar 3, 2023 at 10:14 AM Kevin Williams
wrote:
> Hi Guys,
>
>
>
> Answering my own question also.
>
>
>
> I had a mismatch in the NOC_ID between the driver code and my firmware
> block.
>
>
>
> After fixing that I could get uhd_usrp_probe and others, like gnuradio, to
> recognize my block.
Hi Guys,
Answering my own question also.
I had a mismatch in the NOC_ID between the driver code and my firmware block.
After fixing that I could get uhd_usrp_probe and others, like gnuradio, to
recognize my block.
It did still require an LD_PRELOAD after the “sudo make install” but
Hello Maurizio,
Try going through these recovery steps:
https://kb.ettus.com/X300/X310_Device_Recovery
Jonathon
On Fri, Mar 3, 2023 at 7:07 PM STEFANI, Maurizio (External) via USRP-users <
usrp-users@lists.ettus.com> wrote:
> HI,
>
> I am using an x310 SDR,
>
> I am able to ping it 192.168.10.2
Hi Stefani,
Your USRP's IP address is "192.168.10.2" and its netmask is
"255.255.255.0". Therefore; you need to make your host IP address
192.168.10.X where X can be any number between 1 and 255 except 2. You can
test it by making your Host IP Address "192.168.10.1" with netmask
"255.255.255.0".
K
HI,
I am using an x310 SDR,
I am able to ping it 192.168.10.2, but if I try to issue: uhd_find-devices
-args addr=192.168.10.2, it return:
Linux, GNU C++ version 10.2.1 20201207; Boost_107400; UHD_3.15.0.0-4build1
No UHD Devices Found
Is there someone can help me?
Thank you in advance
maurizio
T
Hi Rob,
I need complex signal. But I tried with a constant, too. I set what you said.
But the result has not changed. I changed variables. I tried different setups
in the context of what you wrote like lo_offset to 1MHz, 5MHz, bandwidth to
5MHz, 10MHz, master_clock_rate to 20MHz all this combin
