On 2022-07-29 16:41, Jason Merlo wrote:
Hi All,
I’m working on a project using an X310 and UBX-160 daughterboards where we need
to perform full duplex on one daughterboard and time-domain duplexing on the
TX/RX port of the second daughterboard. The end goal is essentially just to
control the
On 2022-07-29 16:08, skyung--- via USRP-users wrote:
Hi,
I am setting up OAI 5G gNB and UE with USRP N310 (connected through
1GbE to a desktop with the following CPU:
- Intel(R) Core(TM) i9-7900X CPU @ 3.30GHz
and when I tried to run the UE with
|sudo ./nr-uesoftmodem --sa --usrp-args "typ
UHD 4.2.0.1 is now available [1]! This a minor release that includes:
* Support for ZBX rev D daughterboard. Hardware change only. No product
feature or spec changes.
* Bug fixes and improvements for USRP devices. See the changelog. [1]
We’d like to thank all the USRP users that have fil
You can also try with fprintf(stderr... in case stdout is redirected.
Tiy can put prints in several ad9361 files to see which ones are called,
If all fails try gdb...Press when timing out in tuning and
check the stack...
HTH
Nikos
On Fri, Jul 29, 2022 at 10:02 PM yan zhang wrote:
>
> Hi, Nikos
Hi All,
I’m working on a project using an X310 and UBX-160 daughterboards where we need
to perform full duplex on one daughterboard and time-domain duplexing on the
TX/RX port of the second daughterboard. The end goal is essentially just to
control the switches on the UBX-160 to allow me to tr
Hi,
I am setting up OAI 5G gNB and UE with USRP N310 (connected through 1GbE to a
desktop with the following CPU:
\- Intel(R) Core(TM) i9-7900X CPU @ 3.30GHz
and when I tried to run the UE with
```
sudo ./nr-uesoftmodem --sa --usrp-args "type=n3xx, addr=10.0.0.10" --numerology
1 -r 106 --band
Hi, Nikos,
I am using a E312 device with ad9361 frontend and I am sure the frontend is
ad9361. I have searched for like two weeks and can not find the source code
for tuning.
The most possible code is in the ad9361 driver folder, but that does not
work ... (with printf())
Yan
On Fri, Jul 29, 20
Hi,
Since you're looking for a Windows binary distribution of UHD that
includes the Python bindings, you might find radioconda useful:
https://github.com/ryanvolz/radioconda
Alternatively, you can install the UHD conda package from an existing
conda installation (e.g. Mambaforge):
conda in
Dear Saurav Roy,
On 2022-07-29 14:26 +, Saurav Roy via USRP-users wrote:
> However, I am stuck at binary installation in Windows.
The binary executable does not seem to provide the Python API.
I think you will have to compile the UHD library
with the python binding enabled on Windows yourself
Since build is a user directory, I just save my Cmake configuration
elsewhere and rm-rf * in build...
Clean leave lots of stuff behind:(
HTH
Nikos
On Fri, Jul 29, 2022 at 4:48 PM White, Joshua J
wrote:
>
> I just went through this myself, so I’ll try to include my experience for you.
>
>
>
> Fir
Hi Yan,
Throwing an error (exception?) is a bit drastic. A simple printf or
cout should be sufficient...
Yup. That seems to be controlling the VCO. That should be in your daugtherboard.
What daugtherboard are you using?
If you are using it and it doesn;t print/err then you should be
looking elsewh
Dear sir,
thank you for replying. But I think you are talking about UHD installation from
source in LINUX. However, I am stuck at binary installation in Windows.
Following this page https://files.ettus.com/manual/page_install.html , when we
run the pre-built UHD installer it gets installed easi
I just went through this myself, so I'll try to include my experience for
you.
First, make sure if you've already built and installed UHD, uninstall it and
run "make clean" in the build directory. If you've already built it but
haven't installed it, running "make clean" should be sufficient. Ma
Hi, Nikos,
Thanks for your reply! I will try to learn and install ctag. Here is what I
further find:
Following your directions, I can find the _tx_freq variable in
"uhd/host/lib/usrp/common/ad9361_driver/ad9361_device.h".
I assume that the " _tune_helper() " function implemented in
"uhd/host/lib/
On 2022-07-29 07:55, Federico Civerchia wrote:
Yes, the issue was related to the optical cables in single mode. Using
MMF cables resolved the problem.
Thank you for your support.
Federico
Tha's excellent news! Glad it worked out for you.
On 28/07/22 21:22, Marcus D. Leech wrote:
On 20
Yes, the issue was related to the optical cables in single mode. Using
MMF cables resolved the problem.
Thank you for your support.
Federico
On 28/07/22 21:22, Marcus D. Leech wrote:
On 2022-07-27 11:06, Federico Civerchia wrote:
Dear Community,
I have recently bought two new Ettus N310 an
16 matches
Mail list logo