[USRP-users] RX Misalignment on 6x1 MISO system using X310 and UBX-160

Hello community, I am working on a gnuradio application that synchronously retrieves data from a usrp_source, does some DSP on each of the streams and selects the signal to send on a usrp_sink based on some metric computation. The sources and sinks represent 3 USRP X310 devices, each with 2 UBX-16

Re: [USRP-users] what's wrong with my n310s?help me, please!

On 10/17/2019 12:29 PM, Nate Temple via USRP-users wrote: Hi Wangpan, You had contacted us directly via supp...@ettus.com on this same issue, let's continue to debug through that channel and when the issue is resolved, I can update the mailing list with the result.

Re: [USRP-users] X310 and 8bit complex sampling

Hi Arun - Short answer: No, the X310 doesn't support "sc8" OTW yet; we're still working on the RFNoC converter from "sc16" to "sc8". As noted, the X310 provides dual SPF+ 1GbENET and 10GbENET, and obtaining the ENET hardware interface to a host computer is very doable, providing a lot of possible s

Re: [USRP-users] what's wrong with my n310s?help me, please!

Hi Wangpan, You had contacted us directly via supp...@ettus.com on this same issue, let's continue to debug through that channel and when the issue is resolved, I can update the mailing list with the result. Regards, Nate Temple On Thu, Oct 17, 2019 at 4:55 AM 王盼 via USRP-users < usrp-users@lis

Re: [USRP-users] uhd_fft failure

Yes sorry about the GR37 release version: 3.7.13.5 is the correct on. Installing Py27-six should be pretty straight forward & should allow you to proceed with that install. GR38 has it's own set of dependencies, some of which overlap with GR37 and some of which don't. You'll want to follow the inst

[USRP-users] what's wrong with my n310s?help me, please!

Hello： I got two n310s。I set up them follow the guide in http://kb.ettus.com。I can run “uhd_find_devices”and“uhd_usrp_probe”correctly。Then I want to test them use the uhd/examples。I have seveal problems. (1)One n310 can not run "benchmark_rate"and"rx_samples_to_file"correctly. I