Hi Guys,
I have a question about USRP X300. My plan is to receive RF data from two
channels, and each channel has difference center frequency, e.g., first one
set to 1.5 GHz, second one set to 1.6 GHz. Initially I want to use USRP
B210 dual channel transceiver (as it is much cheaper), however, lat
On 03/02/2019 04:41 PM, Achilleas Anastasopoulos via USRP-users wrote:
Hi all,
In the past I had performed the following successful experiment using
two N210's connected with a MIMO cable:
I transmitted a single sinusoid of 10KHz through on USRP at a carrier
of 1GHz and received it on anothe
Hi all,
In the past I had performed the following successful experiment using two
N210's connected with a MIMO cable:
I transmitted a single sinusoid of 10KHz through on USRP at a carrier of
1GHz and received it on another N210. The latter was configured to use the
MIMO cable for clock reference.
Thanks Jonathon,
> I'm glad you found those options useful. Unfortunately, there are a number of
> corner cases that those options do not handle. You can run into
> synchronization issues when overflows and dropped packets occur. In the
> overflow case, if one occurs while the FFT is being fill
