Hi all,
Any suggestion is welcome.
2018-03-02 14:21 GMT+08:00 liu Jong :
> Hi all,
>When we set "master_clock_rate=25.6M" for Receiving and we found
> that there is a Single frequency interference in
> 76.8M(25.6X3),102.4M(25.6X4),153.6M and so on until above 1.5G.We changed
> the "master
Hi Everybody!,
I have a B210 and I have done a MIMO frequency scanner to send and receive.
I always tune the same freq for both 2 Tx and 2 Rx.
Everything works very well even working at a Sampling Freq = 30MHz.
But I have checked that the functions set_tx_freq and set_rx_freq (that I
call 2 tim
* When you say a max gain of 89 dB, that is the gain you set in GNU Radio
on the USRP block right?
Yes (USRP Sink, not Source).
* With a 30dB attenuator, regardless of what I set the gain to on either
the rx/tx blocks in GNU Radio, and regardless of how far apart I position
the antennas I won't be
Thanks a lot for your reply, lots of very useful information!
A few questions:
* When you say a max gain of 89 dB, that is the gain you set in GNU Radio
on the USRP block right?
* With a 30dB attenuator, regardless of what I set the gain to on either
the rx/tx blocks in GNU Radio, and regardless
