On 02/22/2018 09:15 AM, Piotr Krysik via USRP-users wrote:
Hi all,
There was a thread on this topic started by Hideyuki Matsunaga that
didn't resolve this question.
I want to reiterate this question here but from different point: it
seems that at this moment it isn't possible. I did my best to
Hi all,
it's been a long time since our last major UHD release! We'll have
another one relatively soon, I've just tagged our RC1 and we're
currently testing it for a while before we push it live.
There are hundreds and hundreds of commits with respect to our latest
stable release. The release not
Hello all,
I am currently attempting to use RFNoC blocks through UHD's C++ API, without
using GNU Radio. Right now I am simply trying to create a working example, and
later I will add in or substitute my own custom RFNoC blocks. What I am trying
to do is to replicate the standard transmit chai
We get exactly these error codes as well but in a slightly different use
case.
Whenever we make a soft reboot with an "unloaded" B200/B200mini (i.e.
the fpga image was never loaded) we get these error code and the board
is not accessible.
If the fpga image was loaded, soft reboot works.
A p
Hi Marcus,
I have many USRPs N210 with different daughterboards. I tried with both
SBXv3 and WBXv3 daughterboards and the result is the same : the spikes
appear. The only difference is the spikes amplitude but it's not
suprising because I noticed that with the same transmission paramaretes
(g
Hi, we have a Dell server running Centos 7.4 with a B210 plugged into a USB 3
port on the back. Everything works great when we plug in the B210 after boot,
but if the B210 is plugged in before boot the device is not recognized and we
get these errors in dmesg:
Usb 3-8: device descriptor read/6
Hi Raphael,
don't think switching from GNU Radio to directly talking to UHD will
change much – the GNU Radio USRP Sink is pretty much a thin wrapper
around UHD.
You might have already said that, but I can't find in this email chain:
What's the daughterboards you're using in your TX USRP N210?
Tha
Hi Shrishail. Did you follow the instructions in the error message?
>From the Linux command line, type: /usr/local/lib/uhd/utils/
uhd_images_downloader.py
Then try running *uhd_find_devices* again.
The FPGA bitstreams and firmware images for USRPs must be downloaded
separately.
This application
Dear All
I have installed UHD and GNU radio using procedure given in the Ettus webpage.
https://kb.ettus.com/Building_and_Installing_the_USRP_Open-Source_Toolchain_(UHD_and_GNU_Radio)_on_Linux.
I could find the my USRP connected by command lsusb
Bus 002 Device 004: ID 093a:2510 Pixart Imagin
Hi Marcus,
I'm only sending bursts of "null packets". I send them every 400 ms and
I notice at the receiver side that the spikes happen exactly at the
beginning of EACH transmission of null packets (for this verification I
use GPS clock on the the transmitter and the reveiver).
It's like if
10 matches
Mail list logo
