Hi Thomas. Ettus Research is preparing to offer GPIO and JTAG interface
cables for the B20Xmini series for sale in the next few months. If you
have an urgent need for one, please email supp...@ettus.com.
-Robin
On Thu, Jul 27, 2017 at 10:00 PM, Thomas Teisberg via USRP-users <
usrp-users@list
Does anyone use the GPIO connector on the B205mini? If so, what cable do
you use to access the pins? The crimp contacts for the connector are quite
small and the crimping tool is prohibitively expensive, so I've found it
difficult to make my own cable. I can't find any off the shelf cables out
ther
Thanks Marcus and Philip. I followed Philip's guide and got much further
with the build than before, but I'm still encountering an error when
running 'bitbake gnuradio-dev-image' (and for reference, I'm sticking with
running 'export MACHINE="ettus-e3xx-sg1"' as in the previous guide). The
error is
I had been looking at /mboards/0/link_max_rate to determine if an X300 was
connected via 10 GigE or 1 GigE. However it seems like sometime between when
that was implemented for the X300 (
https://github.com/EttusResearch/uhd/commit/6a72c16ee909af95b6965f26fb588a29
485ef414 ) and now (
https://githu
Hello Christian,
Your configuration of the LO sharing is all reasonable. You are not using
timed commands so you will not get repeatable phase offsets between the
channels due to the DDC's CORDIC and the RX frontend's IF downconverter not
being synchronously reset. The call to set_rx_freq for each
Hi Julian,
Thanks a lot for your explanation and I would agree with you, though I am more
digital than analog guy.
One more piece of information:
The signal variations at the beginning of each burst in my tone signal case is
actually some DC offset whose level goes down gradually. It lasts abou
Hello
My device is b210 version of UHD is 3.9.5 OS Windows7
I try get samples in dual channel mode and I dont wont use continuious stream
becose in its hard for pc for high sample rate.
So I use UHD_STREAM_MODE_NUM_SAMPS_AND_DONE and periodicaly have
uhd_rx_metadata_error_code_timeout error with
On 07/26/2017 10:05 AM, Marcus Müller via USRP-users wrote:
> Dear Alexander,
>
> ah, thanks for the error report!
>
> Philip has a nice page on how he circumvents such problems:
>
> http://www.opensdr.com/posts/using-docker-for-openembedded-builds/
>
> Basically, he uses a docker container to
On 07/26/2017 04:25 AM, Alexander Olihovik via USRP-users wrote:
> I've been following the guide for rebuilding the file system at
> https://files.ettus.com/manual/page_usrp_e3x0.html.
> When I try to build an image with 'bitbake gnuradio-dev-image', I get the
> following error:
> ERROR: Function f
