Re: sa-update fails: permission denied on config directory

You have a permissions issue and there is a plugin needed to run things that by default is enabled in per files. I would try disabling selinix and chmod 777 /etc/mail/spam assassin as a test. Regards, KAM Jeff Rice wrote: >Hi, >I'm seeing an error when the cron job under Debian runs for SA 3.

Re: sa-update fails - bug 6702 reappearing? --- solved

On 3/5/2014 8:36 AM, Dieter Braun wrote: Thanks a lot for this hint - that's been it! This had happened: The files /etc/mail/spamassassin/*.pre, that already existed, were not replaced by the new versions. Only the new file v340.pre was copied to /etc/mail/spamassassin. After moving the exis

Re: sa-update fails - bug 6702 reappearing? --- solved

Thanks a lot for this hint - that's been it! This had happened: The files /etc/mail/spamassassin/*.pre, that already existed, were not replaced by the new versions. Only the new file v340.pre was copied to /etc/mail/spamassassin. After moving the existing *.pre files somewhere else and copyin

Re: sa-update fails - bug 6702 reappearing?

On 3/4/2014 9:18 AM, Kevin A. McGrail wrote: On 3/4/2014 9:09 AM, Mark Martinec wrote: Dieter Braun wrote: # sa-update rules: failed to run T_HEADER_FROM_DIFFERENT_DOMAINS test, skipping: (Can't locate object method "check_equal_from_domains" via package "Mail::SpamAssassin::PerMsgStatus"

Re: sa-update fails - bug 6702 reappearing?

On 3/4/2014 9:09 AM, Mark Martinec wrote: Dieter Braun wrote: # sa-update rules: failed to run T_HEADER_FROM_DIFFERENT_DOMAINS test, skipping: (Can't locate object method "check_equal_from_domains" via package "Mail::SpamAssassin::PerMsgStatus" at (eval 1008) line 97. You are missing a li

Re: sa-update fails - bug 6702 reappearing?

Dieter Braun wrote: # sa-update rules: failed to run T_HEADER_FROM_DIFFERENT_DOMAINS test, skipping: (Can't locate object method "check_equal_from_domains" via package "Mail::SpamAssassin::PerMsgStatus" at (eval 1008) line 97. You are missing a line: loadplugin Mail::SpamAssassin::Plugin

Re: sa-update fails - bug 6702 reappearing?

I tried 5.8.6 with no problems so like I said I am baffled. Perhaps do make uninstall and cut and paste all the commands it would run. Then move everything out of /etc/mail/spamassassin and do another install. That will remove any of your config from consideration. If that works, put back

Re: sa-update fails - bug 6702 reappearing?

Am 03.03.2014 18:24, schrieb Kevin A. McGrail: On 3/3/2014 12:18 PM, Dieter Braun wrote: - XXX:~ # updatedb XXX:~ # locate FreeMail.pm /root/install/Mail-SpamAssassin-3.4.0/blib/lib/Mail/SpamAssassin/Plugin/FreeMail.pm /root/install/Mail-SpamAssassi

Re: sa-update fails - bug 6702 reappearing?

On 3/3/2014 12:18 PM, Dieter Braun wrote: - XXX:~ # updatedb XXX:~ # locate FreeMail.pm /root/install/Mail-SpamAssassin-3.4.0/blib/lib/Mail/SpamAssassin/Plugin/FreeMail.pm /root/install/Mail-SpamAssassin-3.4.0/lib/Mail/SpamAssassin/Plugin/FreeMail.pm

Re: sa-update fails - bug 6702 reappearing?

Am 03.03.2014 17:49, schrieb Axb: On 03/03/2014 05:25 PM, Kevin A. McGrail wrote: On 3/3/2014 11:21 AM, Dieter Braun wrote: Am 03.03.2014 17:13, schrieb Kevin A. McGrail: On 3/3/2014 10:57 AM, Dieter Braun wrote: All Plugins appear to be from 3.4.0. With 'find / -nzme "perl*"' I cannot find

Re: sa-update fails - bug 6702 reappearing?

On 03/03/2014 05:25 PM, Kevin A. McGrail wrote: On 3/3/2014 11:21 AM, Dieter Braun wrote: Am 03.03.2014 17:13, schrieb Kevin A. McGrail: On 3/3/2014 10:57 AM, Dieter Braun wrote: All Plugins appear to be from 3.4.0. With 'find / -nzme "perl*"' I cannot find any file belonging to another versi

Re: sa-update fails - bug 6702 reappearing?

On 3/3/2014 11:21 AM, Dieter Braun wrote: Am 03.03.2014 17:13, schrieb Kevin A. McGrail: On 3/3/2014 10:57 AM, Dieter Braun wrote: All Plugins appear to be from 3.4.0. With 'find / -nzme "perl*"' I cannot find any file belonging to another version of perl. (To be more exact: I cannot claim th

Re: sa-update fails - bug 6702 reappearing?

Am 03.03.2014 17:13, schrieb Kevin A. McGrail: On 3/3/2014 10:57 AM, Dieter Braun wrote: All Plugins appear to be from 3.4.0. With 'find / -nzme "perl*"' I cannot find any file belonging to another version of perl. (To be more exact: I cannot claim this for the man pages, but that shouldn't m

Re: sa-update fails - bug 6702 reappearing?

On 3/3/2014 10:57 AM, Dieter Braun wrote: All Plugins appear to be from 3.4.0. With 'find / -nzme "perl*"' I cannot find any file belonging to another version of perl. (To be more exact: I cannot claim this for the man pages, but that shouldn't matter here.:-) ) Can you view HeaderEval.pm and c

Re: sa-update fails - bug 6702 reappearing?

Am 03.03.2014 16:21, schrieb Kevin A. McGrail: On 3/3/2014 10:06 AM, Dieter Braun wrote: Tried it - removed all files listed in /usr/lib/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/Mail/SpamAssassin/.packlist and recompiled from scratch (after "make clean"): Same behavior as describe

Re: sa-update fails - bug 6702 reappearing?

On 3/3/2014 10:06 AM, Dieter Braun wrote: Tried it - removed all files listed in /usr/lib/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/Mail/SpamAssassin/.packlist and recompiled from scratch (after "make clean"): Same behavior as described below. Noticed something I'm wondering about:

Re: sa-update fails - bug 6702 reappearing?

Tried it - removed all files listed in /usr/lib/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/Mail/SpamAssassin/.packlist and recompiled from scratch (after "make clean"): Same behavior as described below. Noticed something I'm wondering about: "sa-update" and "spamassassin --lint" wan

Re: sa-update fails - bug 6702 reappearing?

This looks like a step where you have old and new as versions intermingling and not playing nicely. Can you clear the install and reinstall? Regards, KAM Dieter Braun wrote: >Hi, > >after upgrading to 3.4.0 (on a test machine ;-)) sa-update doesn'twork >any more. I'm getting the following out

Re: sa-update fails with “no mirrors available”

On 2013–09–23 Kevin A. McGrail wrote: > > This file is empty here. I assume that's wrong. > > Try deleting the MIRRORED.BY file and run again. There are some > race conditions that can lead to the issue that should be already > fixed in trunk I deleted MIRRORED.BY and now it's working: dbg:

Re: sa-update fails with “no mirrors available”

On 2013–09–23 Kevin A. McGrail wrote: > 1 - run sa-update -D -v to get more verbosity and send that log to > the mailing list log is attached, here the last lines: Sep 23 19:52:46.968 [5668] dbg: channel: reading MIRRORED.BY file error: no mirrors available for channel updates.spamassassin.o

Re: sa-update fails with “no mirrors available”

> This file is empty here. I assume that's wrong. Try deleting the MIRRORED.BY file and run again. There are some race conditions that can lead to the issue that should be already fixed in trunk (i.e. no reason to open a bug report). regards, KAM

Re: sa-update fails

You were right. I've reinstalled LWP and sa-update worked. Thank you John. John Hardin wrote: > > On Fri, 12 Aug 2011, manspan1 wrote: > >> I have a fresh installation of spamassassin (ver 3.3.2) on solaris 10. >> When I run: sa-update I get: >> >> http: GET http://spamassassin.apache.org/upd

Re: sa-update fails

On Fri, 12 Aug 2011, manspan1 wrote: I have a fresh installation of spamassassin (ver 3.3.2) on solaris 10. When I run: sa-update I get: http: GET http://spamassassin.apache.org/updates/MIRRORED.BY request failed: 501 Attempt to reload LWP/Protocol/http.pm aborted. Compilation failed in requi

Re: sa-update fails: daryl.dostech...404

On 13/02/2010 6:35 PM, jida...@jidanni.org wrote: > $ sa-update > http: GET http://daryl.dostech.ca/sa-update/asf/909775.tar.gz request failed: > 404 Not Found There was an issue on the source host that has since been resolved. Daryl

Re: sa-update fails suddenly

On Donnerstag, 13. November 2008 Michael Monnerie wrote: > Without changing anything Bah, found the bug, it was a PEBKAC. Some stupid installed SA 3.1.8 from the openSUSE DVD, while we were at 3.2.5. Reverted to 3.2.5, runs smooth as it should. Sorry for the fuzz. mfg zmi -- // Michael Monneri

Re: sa-update fails suddenly

What about "spamassassin -D --lint"? btw I suspect this is from having 2 versions of SpamAssassin installed, and/or 2 versions of perl, colliding with each other. --j. Michael Monnerie writes: > On Mittwoch, 12. November 2008 Justin Mason wrote: > > Are you using the sought ruleset?  I update

Re: sa-update fails suddenly

On Mittwoch, 12. November 2008 Justin Mason wrote: > Are you using the sought ruleset?  I updated that last night to > bundle the new anti-fraud component.   However it all looks fine and > I can't see a bug that would cause those errors... I've got confirmation that I have been re-subscribed now.

Re: sa-update fails suddenly

On Mittwoch, 12. November 2008 Justin Mason wrote: > Are you using the sought ruleset?  I updated that last night to > bundle the new anti-fraud component.   However it all looks fine and > I can't see a bug that would cause those errors... Oh, my first mail to the list arrived, so I seem to not g

Re: sa-update fails suddenly

On 12.11.08 11:24, Michael Monnerie wrote: > Without changing anything my sa-update suddenly fails badly. Can someone > give me a hint? HAven't you changed or upgraded perl or any of its libraries? > Subroutine check_for_from_dns redefined at > /usr/lib/perl5/vendor_perl/5.8.8/Mail/SpamAssassin

Re: sa-update fails suddenly

Michael Monnerie writes: > Without changing anything my sa-update suddenly fails badly. Can someone give > me a hint? Are you using the sought ruleset? I updated that last night to bundle the new anti-fraud component. However it all looks fine and I can't see a bug that would cause those erro

Re: sa-update fails

>> (Please keep it on the list...) Gene Heskett wrote: Have you checked in the key ring to see that it's really there? The command is cat, but what file? I don't know from memory, but my guess is that reading the man pages would give an answer to this. gone, but it also isn't updating a

Re: sa-update fails

(Please keep it on the list...) Gene Heskett wrote: Did you also follow the instructions for the channel you are trying to update? They are available at . First time anybody has mentioned that in about 6 months, Maybe it is, but in that case it was mentio

Re: sa-update fails

Gene Heskett wrote: Even though I have followed the intructions in the error message twice now, I still have the same error when sa-update is run: Did you also follow the instructions for the channel you are trying to update? They are available at . # /us

Re: sa-update fails

On Thu, Jan 10, 2008 at 12:24:00PM +, Justin Mason wrote: > > >> # /usr/bin/sa-update --allowplugins --gpgkey > > >> D1C035168C1EBC08464946DA258CDB3ABDE9DC10 --channel > > >> saupdates.openprotect.com error: GPG validation failed! > > >> The update downloaded successfully, but it was not signed

Re: sa-update fails

Gene Heskett writes: > On Thursday 10 January 2008, Justin Mason wrote: > >Gene Heskett writes: > >> Greetings; > >> > >> Even though I have followed the intructions in the error message twice > >> now, I still have the same error when sa-update is run: > >> > >> # /usr/bin/sa-update --allowplugin

Re: sa-update fails

Gene Heskett writes: > Greetings; > > Even though I have followed the intructions in the error message twice now, I > still have the same error when sa-update is run: > > # /usr/bin/sa-update --allowplugins --gpgkey > D1C035168C1EBC08464946DA258CDB3ABDE9DC10 --channel saupdates.openprotect.com

Re: sa-update fails

John Thompson wrote: Running Spamassassin-3.2.1 on FreeBSD (built from the ports collection), sa-update fails for me thus: [root]# sa-update Can't locate object method "finish" via package "Mail::SpamAssassin::Timeout" at /usr/local/lib/perl5/site_perl/5.8.8/Mail/SpamAssassin/PluginHandler.pm

Re: sa-update fails with "SHA1 verification failed"

On Tue, Apr 11, 2006 at 10:15:45AM -0400, Rosenbaum, Larry M. wrote: > # sa-update > error: can't verify SHA1 signature > channel: SHA1 verification failed, channel failed > > At this point the > /var/lib/spamassassin/3.001001/updates_spamassassin_org directory was > empty, but SpamAssassin was st

Re: sa-update fails - NXDOMAIN on updates.spamassassin.org

On Tue, Sep 20, 2005 at 07:20:43AM -0500, Steven Stern wrote: > [17638] dbg: channel: attempting channel updates.spamassassin.org > [17638] dbg: channel: update directory > /etc/mail/spamassassin/updates_spamassassin_org > [17638] dbg: channel: channel cf file > /etc/mail/spamassassin/updates_spa