e same behaviour as before.
I hope someone could give me a hint how I could get past this problem,
as so far my ovirt experience has been a little bit sub-par. :D
Also when running ovirt-hosted-engine-cleanup, the extracted engine VMs
in /var/tmp/localvm* are not removed, leading to a &
.
Regards
Jonas
On 2020-06-28 16:26, jonas wrote:
Hi!
I have banged my head against deploying the ovirt 4.4 self-hosted
engine on Centos 8.2 for last couple of days.
First I was astonished that resources.ovirt.org has no IPv6
connectivity, which made my initial plan for a mostly IPv6-only
deployment
Hi!
Thanks for your comments! I am unsure regarding your hunch that the oVirt Repo
is to blame, as from inside the engine after the botched deployment, absolutely
nothing outside of the engine and its host is reachable via IPv4/v6, and a
manual "dnf update" also produces a failure that the AppSt
Hi,
We are currently building a three node hyper-converged cluster based on oVirt
Node and Gluster. While discussing the different storage layout we couldn't get
to a final decision.
Currently our servers are equipped as follows:
- servers 1 & 2:
- Two 800GB disks for OS
- 100GB RAID1 use
Hi all,
Feel free to give your personal opinion whether software RAID makes any sense
at all with oVirt Node or what your architecture would be given the mentioned
hardware (3 servers, 6 800GB NVME disks, 18 7.68TB NVME disks).
Thanks a lot for any feedback,
Jonas
Hi together,
I already checked the other Threads here :) I know that there was an issue with
old CentOS 8 repos.
Currently Im trying so update our self hosted engine as always but I get the
following error:
Failed to download metadata for repo 'ovirt-4.4-centos-gluster8': Cannot
prepare int
Yes the machine is running under CentOS Stream.
This is my repo list. Any ideas?
#yum repolist
repo id repo name
appstreamCentOS Stream
8 - AppStream
baseos
tions are there
for us? Or do you think going the Gluster way would still be advisable, even
though it seems as it is being discontinued over time?
Thanks for any input on this!
Best regards,
Jonas
On 1/22/22 14:31, Strahil Nikolov via Users wrote:
> Using the wizzard is utilizing the
04538-gkujrm.log).
Regards,
Jonas
On 4/18/22 19:02, Strahil Nikolov via Users wrote:
Is it timing out ?
Best Regards,
Strahil Nikolov
On Mon, Apr 18, 2022 at 12:46, Jonas Liechti
wrote:
Hello users,
I am currently trying to deploy the self-hosted engine via the web
inte
n bump the limits at /etc/security/limits.d/99-vdsm.conf.
Can you check your current settings in it ?
Best Regards,
Strahil Nikolov
On Wed, Apr 20, 2022 at 8:10, Jonas
wrote:
We're using oVirt Node 4.4.10 without any special configuration
regarding SSH. I also have no issues
> Gluster ansible roles for deploying new hyperconverged setups are
currently broken due to the lack of the packaging of a few collections
on the gluster side.
> They're working on it, I think they'll fix that soon.
May I be so impertinent and ask for an ETA? :D
> Anyone who can provide feedba
I ran into this aswell and I *think* it is this problem here:
https://lists.ovirt.org/archives/list/users@ovirt.org/thread/27TOMN4KBWECMYV4QQ6XFVX5ALFWZELH
Solution:
ansible-galaxy collection install community.general
ansible-galaxy collection install gluster.gluster
__
there a way to define something like a baseline for nodes using oVirt
Engine?
Thank you for your valuable input!
Jonas
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org
sed by the
community here?
Thank you and kind regards,
Jonas
Screenshot of oVirt Disk___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Condu
You might need to follow the reported_devices link. Further info:
http://ovirt.github.io/ovirt-engine-api-model/4.5/#types/reported_device
Am 7. Juli 2022 05:24:38 MESZ schrieb coollo...@gmail.com:
>anyone could help me ?
>vm have installed the guest-agent,and i could see ipv4 info in the engine
file
(see below). Unfortunately, this approach was not successful. My
solution is now to only create a data volume and manually create a thick
provisioned gluster volume manually. What would you recommend doing?
Thanks your any input :)
Regards,
Jonas
[1]:
https://access.redhat.com/documentati
Nevermind, I found this here:
https://github.com/gluster/gluster-ansible-infra/blob/master/roles/backend_setup/tasks/thick_lv_create.yml
On 9/12/22 21:02, Jonas wrote:
Hello all
I tried to setup Gluster volumes in cockpit using the wizard. Based on
Red Hat's recommendations I wanted t
ists.ovirt.org/archives/list/users@ovirt.org/thread/HMLCEG2LPSWFOVUBDPU5JLKD7DWUGVE3/
Thank you,
Jonas
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code
om.redhat.fips=false
Password:
Reenter password:
updating user admin...
user updated successfully
On 9/14/22 21:40, Jonas wrote:
Hello all
I'm trying to deploy an oVirt Engine through the cockpit interface.
Unfortunately the deployment fails with the following error:
[ INFO ] TASK [ovirt.
he_requirements_check_enabled: true
he_memory_requirements_check_enabled: true
On 9/15/22 09:18, Ritesh Chikatwar wrote:
Hey Jonas,
What is the cockpit version you are using? And also can you share this
file with me
(/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/role
Ok, thanks for the info. Do you have any further information?
On 9/15/22 09:11, Yedidyah Bar David wrote:
On Wed, Sep 14, 2022 at 11:31 PM Jonas wrote:
Ok even after resetting the password through SSH it is not accepted on the web
page.
[root@ovirt-engine-test ~]# ovirt-aaa-jdbc-tool user
I don't have that anymore, but I assume that gluster_infra_lv_logicalvols
requires a thin pool:
https://github.com/gluster/gluster-ansible-infra/blob/master/roles/backend_setup/tasks/thin_volume_create.yml
___
Users mailing list -- users@ovirt.org
To un
I meant what exactly is broken and if there is a workaround or a planned fix.
I performed a deployment using hosted-engine. This goes on step further, but
fails while waiting for the host:
[...]
[ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Obtain SSO token using
username/password credential
https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infrastructure_for_virtualization/1.8/html/deploying_red_hat_hyperconverged_infrastructure_for_virtualization/rhhi-requirements#rhhi-req-lv
> The logical volumes that comprise the engine gluster volume must be thick
> provisio
Thanks for the detailed explanation! I got it to work by downgrading the
package as you wrote.
On 9/19/22 08:43, Yedidyah Bar David wrote:
On Sat, Sep 17, 2022 at 4:15 PM wrote:
I meant what exactly is broken and if there is a workaround or a planned fix.
The breakage happened due to:
- ans
Maybe you have the same issue as I did:
https://lists.ovirt.org/archives/list/users@ovirt.org/thread/PCYIQTY457LEX44NCTGH4LKM4DN6J4EJ/
The solution is to login to the engine VM and downrade the package
ansible-core after the package update step:
dnf downgrade -y ansible-core-2.12.3-1.el8.x86_
Hello all
I just recently installed a fresh oVirt appliance. Now I want to use the API to
perform some actions but fail to provide the correct username. Can you help?
Here's my script:
import ovirtsdk4 as sdk
from getpass import getpass
dc_name = "Default"
clu_name = "Default"
connection = sdk
Found it here:
https://github.com/oVirt/ovirt-engine-keycloak/blob/master/keycloak_usage.md.
It's admin@ovirt@internalsso.
Am 22. September 2022 19:02:56 MESZ schrieb jo...@rabe.ch:
>Hello all
>
>I just recently installed a fresh oVirt appliance. Now I want to use the API
>to perform some actio
Hi there
I want to create incremental backups of a few imported VMs, but the VM disks
are in the raw disk format which does not support incremental backup. Is there
a way to convert existing disks from raw to qcow in oVirt? Since qemu-img can
do this,I assume there must be a way..
Thank you
Jo
Hi
I have the exact same issue. Did you just add an entry in /etc/logrotate.d/ or
did you solve it in a different way?
Regards,
Jonas
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement
Hello
I have to migrate the Gluster volumes from an old oVirt cluster to a newly
built one. I looked into migration strategies, but everything that Red Hat
recommends is related to replacing old bricks. In a testing environment I
created two clusters and wanted to migrate one volume after the o
d parameters of the storage domains but did not
find any similar setting in the configuration of the gluster volumes. Do
you know of way to configure this setting for a gluster volume which is
not used as a storage domain?
Thank you
Jonas
___
Use
I just ran into the same issue when trying to upgrade an existing oVirt
Node host from 4.5.4 to 4.5.5. My problem seems to be with the package
ovirt-node-ng-image-update. I made sure to to download the latest
package from the mirror by running dnf clean all before upgrading. Can
you resign this
Some more context:
# rpm --checksig --verbose
/var/cache/dnf/ovirt-45-upstream-62781357e04a3932/packages/ovirt-node-ng-image-update-4.5.5-1.el8.noarch.rpm
/var/cache/dnf/ovirt-45-upstream-62781357e04a3932/packages/ovirt-node-ng-image-update-4.5.5-1.el8.noarch.rpm:
Header V4 RSA/SHA256 Sig
Hi Lev
Thanks a lot, I can confirm that the signature now correctly verifies
with the new key. Thanks also for updating the oVirt site with the new key!
Regards
Jonas
On 26.02.24 15:45, Lev Veyde wrote:
Hi Jonas,
New packages are currently being signed with the new 4096 bit key, which
can
While I haven't configured it myself (someone else in my Team did the
integration and we are using another Keycloak instance, not LDAP) and
therefore don't know all details, I think you should be able to
configure another IdP in the Keycloak administration interface
(https:///ovirt-engine-auth/
Hello all
After upgrading one node from 4.5.4 to 4.5.5 the migration fails on some of the
VMs. I believe the error is with qemu-kvm according to the logs below.
Downgrading the packages seems not to be possible with oVirt Node, the only
solution so far was rebooting back to 4.5.4 (thanks to img
Thanks for your response! I guess my path will be to migrate to el9 ovirt-node
then.
Am 25. April 2024 08:18:57 MESZ schrieb "Nathanaël Blanchet" :
>Hello,
>I already mentioned this issue, it is because of el8 4.5.5 embedded qemu
>version that is not compatible with 4.5.4 one. If all your hosts
On 29/01/14 07:29, Oved Ourfalli wrote:
Hi Jonas
Apparently there is a quite new bug open about this issue
(https://bugzilla.redhat.com/1057147).
CC-ing Juan and Yair - perhaps the'll know what's the source of the issue, as I
think they were the last ones to make changes in it.
Ju
to those objects.
So adding to the basic view in the user portal a power off button and
extending the ordinary user-permission to also include power off I think
would be a good idea.
Rgds Jonas
___
Users mailing list
Users@ovirt.org
http
wont get any permission to create new
machines, disks etc) hence my suggestion to add a few new features
to the basic tab.
Rgds Jonas
On 27/02/14 14:42, Maurice James wrote:
Its a "plug&
TX packets:137 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:17662 (17.2 KiB) TX bytes:26684 (26.0 KiB)
If manully setting the MTU everything work as expected.. (Until you
reboot the machine)
Anyone else seen this ?
Rgds
is back to normal.
I'm quite sure that nic (vnet26) must match what is set on the host
physical NIC, I cant see how it would work otherwise.
Rgds Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
On 02/03/14 15:49, Mike Kolesnik wrote:
- Original Message -
This sounds like a reasonable behaviour since there is a clear separation
between the host networking configuration to the vms networking
configuration.
What you're attempting to achieve is guest-os level network configuration
ebooted my Nodes violently hundreds of times (and they have
always recovered), but now I have data/config that I'm keen not to loose.
Failed to find this info on the wiki...
Brgds Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ov
core.vdsbroker.vdsbroker.GetVGInfoVDSCommand]
(org.ovirt.thread.pool-8-thread-42) [5f2bcbf9] Command
org.ovirt.engine.core.vdsbroker.vdsbroker.GetVGInfoVDSCommand return value
OneVGReturnForXmlRpc [mStatus=StatusForXmlRpc [mCode=506,
mMessage=Volume Group does not exist: (u'vg_uuid:
aAoOcw-d9YB-y9gP-Tp4M-S0UE-Aqpx-y6Z2Uk',)]]
Could someone (pretty please with sugar on top) point me in the right
direction ?
Brgds Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
No one ?
On 23/03/15 16:54, Jonas Israelsson wrote:
Greetings.
Running oVirt 3.5 with a mix of NFS and FC Storage.
Engine running on a seperate KVM VM and Node installed with a pre 3.5
ovirt-node "ovirt-node-iso-3.5.0.ovirt35.20140912.el6 (Edited)"
I had some problems with my
ng to take (only) host/node online it goes back to
non-operational since it's unable to mount the master storage domain.
Rebooting the node and or the engine makes no difference.
Everything storage wise should be OK now.
Any idea on how to recover ?
vdsm.log attached
With kind regards
Jo
python2.7/xmlrpclib.py", line 1473, in parse_response
File "/usr/lib64/python2.7/xmlrpclib.py", line 793, in close
Fault: :method
"releaseDomainLock" is not supported'>
Could someone please point me in the right direction ?
Rgds Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
run VM moleman (User: isrjo).
I was on Ovirt 3.4.0-0.13.rc.el6 and right or wrong I decided to
upgrade the engine to a released version and I'm now on 3.4.0-1.el6, it
however made no difference
Any help would be greatly appreciated.
Rgds Jonas
___
I removed the host and re-attached it to the DC and now I am able to
fire up all VMs again :-)
On 15/08/14 15:59, Jonas Israelsson wrote:
I screwed up massively today when accidentally assigned a new virtual
network (on my host) the same IP-address as on my iscsi SAN subnet and
as a result
Greetings.
Is the collectd feature on the iso-based nodes supposed to work ? And if
so am I supposed to do anything more that adding the
server and port via the tui ?
I see my collectd configuration end up in the file /etc/default/ovirt
Part from that I don't see a single (collectd) byte leav
27;1970-01-01T00:00:01'>
network='vdsm-ovirtmgmt' fromConfig='0'/>
oVirt Engine Version: 3.6.3.4-1.el7.centos
Node: oVirt Node Hypervisor release 3.6 (0.999.201512141021.el7.centos)
Is this a known issue ?
Brgds,
Jonas
__
No one ?
I've tested now also with a hosted engine setup. Can't see there either
that the keyboard layout information set in the web-ui ever reaches the VM.
Think we have a bug here.
Rgds,
Jonas
On 11/04/16 17:43, Jonas Israelsson wrote:
Greetings.
We are under the impressi
I've tested now also with a hosted engine setup. Can't see there either that
the keyboard layout information set in the web-ui ever reaches the VM.
That should work. HE is a bit different, and noVNC client doesn't support
keymaps properly, but you should see it in xml
Does spice work? Any s
On 2016-04-28 12:31, Michal Skrivanek wrote:
On 28 Apr 2016, at 10:32, Jonas Israelsson
wrote:
I've tested now also with a hosted engine setup. Can't see there either that
the keyboard layout information set in the web-ui ever reaches the VM.
That should work. HE is a bit
we have one now and working on it!:)
https://bugzilla.redhat.com/show_bug.cgi?id=1331274
Missed this, so I too opened a bugzilla. My apologies
Feel free to dupe it --> https://bugzilla.redhat.com/show_bug.cgi?id=1331333
Rgds,
Jonas
___
Users mail
half-finished.
Rgds Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
On 17/10/13 17:22, Juan Hernandez wrote:
> On 10/17/2013 05:15 PM, Itamar Heim wrote:
>> On 10/17/2013 09:57 AM, Jonas Israelsson wrote:
>>> I saw that openldap is now listed as a provider when invoking
>>> engine-manage-domains. I'm eager to find more information
On 18/11/13 17:24, Juan Hernandez wrote:
On 11/18/2013 12:17 PM, Jonas Israelsson wrote:
On 17/10/13 17:22, Juan Hernandez wrote:
On 10/17/2013 05:15 PM, Itamar Heim wrote:
On 10/17/2013 09:57 AM, Jonas Israelsson wrote:
I saw that openldap is now listed as a provider when invoking
engine
On 18/11/13 18:26, Juan Hernandez wrote:
On 11/18/2013 06:21 PM, Jonas Israelsson wrote:
On 18/11/13 17:24, Juan Hernandez wrote:
On 11/18/2013 12:17 PM, Jonas Israelsson wrote:
On 17/10/13 17:22, Juan Hernandez wrote:
On 10/17/2013 05:15 PM, Itamar Heim wrote:
On 10/17/2013 09:57 AM
On 18/11/13 18:41, Juan Hernandez wrote:
On 11/18/2013 06:37 PM, Jonas Israelsson wrote:
On 18/11/13 18:26, Juan Hernandez wrote:
On 11/18/2013 06:21 PM, Jonas Israelsson wrote:
On 18/11/13 17:24, Juan Hernandez wrote:
On 11/18/2013 12:17 PM, Jonas Israelsson wrote:
On 17/10/13 17:22, Juan
I don't think so. This is a known problem with the Kerberos
implementation in the Java virtual machine. It generates this error when
the SASL minssf configuration parameter is 0. You should be able to
change this OpenLDAP setting as follows:
Yes, that seem to do the trick and the domain now got su
FC19 with an engine running EL6
and vice versa as long as the versions are the "same" ?
Rgds Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
isk with dd, made no
difference.
I could also (if it would help) have another go tonight and try and find
some evidence.
Rgds Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Greetings.
We are in the process of migrating from oVirt 3.6 to 4.0. To properly
test 4.0 we have setup a parallel 4.0 environment.
For the non critical vm:s we thought we try the "export vms --> move
storage domain to the other DC --> import vms" method.
While many imports are successful q
On 23/10/16 20:06, Nir Soffer wrote:
On Sun, Oct 23, 2016 at 5:34 PM, Jonas Israelsson
wrote:
Greetings.
We are in the process of migrating from oVirt 3.6 to 4.0. To properly test
4.0 we have setup a parallel 4.0 environment.
For the non critical vm:s we thought we try the "expor
I apparently was unable to connect the dots when I was working on this
yesterday.
So, just to test I now manually changed the size value in the meta file
67108864 --> 73924608
And after that I was able to import the vm.
So perhaps the real problem is in the export ?
Rgds Jonas
On 23/10
he web-ui where the actual size says 35G while the size
stays at 32G.
That disk is created inside oVirt, and I can not explain how it could
have grown beyond 32G
Rgds,
Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
tance trying to
import storage domains just gives you a spinning wheel when it's
searching for nfs-domains to display.
By reorder the nameservers in resolv.conf we got it working yesterday
during our 3.6 ---> 4.0 migration.
Could someone confirm this, please ?
On 27/10/16 11:34, Simone Tiraboschi wrote:
On Thu, Oct 27, 2016 at 10:17 AM, Jonas Israelsson
<mailto:jonas.israels...@elementary.se>> wrote:
Greetings.
We are under the impression if the machine that runs the
oVirt-engine looses it's primary nameserver, th
wrong,
my apologies for the noise.
Brgds,
Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
How do I persist files on a ng-node ?
I forgot to add some needed network-configuration during install. While
these manually added config files seem to survive a reboot, updating the
node via the web-ui will wipe them.
TIA
Jonas
___
Users mailing
y is still not 'official' ?
Rgds Jonas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
ob/ovirt-node_ovirt-3.6_create-iso-el7_merged/lastSuccessfulBuild/artifact/exported-artifacts/ovirt-node-iso-3.6-0.999.201510190928.el7.centos.iso
That made however no difference.
I could use some help..
TIA
Rgds Jonas
___
Users mailing list
Users@ovirt.
Thanks a million for looking into this.
Please wait for a new build of node with that.
If you are in hurry you can also try to manually fix on your hosts:
$ remount / re-write
$ cd /tmp
$ wget all the qemu 2.3 rpm-files from
http://resources.ovirt.org/pub/ovirt-3.6-pre/rpm/el7/x86_64/ (there
On 2015-10-20 09:54, Simone Tiraboschi wrote:
On Mon, Oct 19, 2015 at 8:40 PM, Jonas Israelsson
mailto:jo...@israelsson.com>> wrote:
Greetings.
Upgraded my Engine from a pre 3.6 version (not sure about the
version, but it's only a month old or so) to RC today a
Hi
Using 3.6 and VNC or noVNC with the swedish keyboard layout is far from
optimal.
To be frank it's almost useless since vital characters such as - (minus)
and | (pipe) can't be typed.
Furthermore many other characters are mapped to wrong the keys.
Can this be tweaked ? I'm more than willing
For information.
Just installed the opensuse guest agent from factory -->
http://download.opensuse.org/repositories/home:/evilissimo/openSUSE_Factory/
Seem to work just fine with next upcoming opensuse relase: leap (42.1)
___
Users mailing list
Use
Greetings.
I think I have stumbled upon a bug related to firefox.
Running released version of oVirt 3.6 and trying to attach a disk to a
vm. It is however impossible to select a disk after position 13 (from
top) in the list.
Looking at the 'table border' that I assume normally should go around
This is a weird issue.
Before upgrading it took 8-9 seconds to retrieve all VM's, 1230, using
/ovirt-engine/api/vms URI. After the upgrade it now takes over 2 minutes.
Query other items such as hosts, clusters, data centers etc is fast and the
same speed as prior the upgrade from 4.2 to 4.3
I don
exists).
My question is where can the reference still be, in the DB or in any active
data structure the hypervisors are using?
if it is in the DB I guess some clever SQL statement might be able to remove it
but if that's the case I would need help with those SQL statements.
Thanks
/
Hi. I tried to signup 30 minutes ago with this email address but has still not
received the signup confirmation email.
/Jonas
***
CONFIDENTIALITY AND PRIVACY NOTICE: This e-mail and any attachments are for the
exclusive and confidential
Would you mind sharing a link to this script? I would be interested in how it
works.Am 14.02.2022 19:45 schrieb marcel d'heureuse :
>
> Moin,
>
> We have in our Environment 12 servers managed by one self hosted engine. It
> is ovirt 4.3.9. We are Freizeit on that Version.
>
> How did you make Bac
on this!
Best regards,
Jonas
On 1/22/22 14:31, Strahil Nikolov via Users wrote:
Using the wizzard is utilizing the Gluster Andible roles.
I would highly recommend using it, unless you know what you are
doing (for example storage alignment when using Hardware raid).
Kee
you for any tips for debugging.
Jonas
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/
Try downgrading postgresql-jdbc
(https://lists.ovirt.org/archives/list/users@ovirt.org/message/N6MNSV4ZK26V5NVPBFAMHQPAQAWUR2OE/)
dnf downgrade postgresql-jdbc
systemctl restart ovirt-engine
Am 05.05.2022 08:18 schrieb sachendra.shu...@yagnaiq.com:
>
> We have installed ovirt engine on centos 8
I had the same problem and found the solution here:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6IKZ45B2TUCQB6WXZ3B4AFVU2RXZXJQQ/
Find cli.py on the host and comment out the line with `value ['stripeCount'] =
el.find('stripeCount').text`
Am 06.05.2022 19:01 schrieb yp...@163.co
I was looking at those studies but not sure how old they are.
What I can see is that our oVirt deployment seems bigger than any of those
studies but I can be wrong.
-- Original Message --
Received: 01:08 AM MDT, 09/02/2022
From: Sandro Bonazzola
To: j...@usa.net Cc: oVirt Users
Subject
Hi everyone,
I am new to this forum. I am excited to be here and to learn more about oVirt.
I have just started exploring oVirt, and I have a few questions.
Could someone please guide me on how to ask questions here ?
Where should I post if I have a query ?
Looking forward to your advice and co
Hi,
In pass-through mode it is essential to assign all GPUs connected through
NVLink to the same VM. If only a subset of these GPUs is assigned to a VM it
triggers the unrecoverable error XID 74 during boot corrupting the NVLink state
and rendering the NVLink bridge unusable. Therefore to avoid
Hi,
To resolve the issue of VM migration failure in oVirt 4.4.5 due to certificate
authentication errors, you should re-establish trust between the hosts. This
can be done by redistributing the newly renewed certificates to all hosts and
ensuring they recognize each other as trusted peers. Addi
Hi everyone,
I am setting up a new storage domain in oVirt and running into a bit of
trouble. I’ve followed the setup guide but the storage domain isn’t showing up
in the “Storage” section of the admin portal...
Here’s what I’ve done so far::-
-Created the storage domain in the setup wizard.
-
nning task?
--
Jonas Kirk Pedersen
ASOM-Net
Systemadministrator
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
that was not active.
The ntp service running on the Engine was out of sync with a year
resulting in that of cause the certificate did not work and then the
vdsm would not start.
I have a fairly new engine so I removed it and fixed the time issue and
all was perfect
T
me kind of cache that tells the hosts to run these vm's? Maybe from
the vmsd. Not hosted ovirt-engine but dedicated hardware for ovirt-engine.
--
Jonas Kirk Pedersen
ASOM-Net
Systemadministrator
signature.asc
Description: OpenPGP digital signature
__
96 matches
Mail list logo
