On Mon, 3 Jul 2017 15:27:36 +0200
Gabriel Stein wrote:
> Hi all,
>
> I'm installing oVirt for the first time and I'm having some issues
> with the Networking.
>
> Setup:
>
> OS: CentOS 7 Mininal
> 3 Bare Metal Servers(1 for Engine, 2 for Nodes).
> Network:
> Nn Trunk Interfaces with VLANs and
On Thu, 31 Aug 2017 16:46:15 +0100
Sec For wrote:
> Now, I have moved into wifi - where I have *wlp2s0 *interface, When I
> click host->setup network -> it don't get wlp2s0 interface to link
> with ovirt engine.
>
> How do we connect wifi interface wlp2s0 to ovirt engine?
>
We never checked Wi
7; network='vdsm-Public'/>
> listen='mynodeIP' keymap='en-us' defaultMode='secure'
> passwdValidTo='1970-01-01T00:00:01'> address='mynodeIP' network='vdsm-Public'/> mode='secure'/> name='inputs' m
On Fri, 13 Jan 2017 10:45:43 -0500
"paul.greene.va" wrote:
>
> After a reboot the virtual interfaces usually initially come up, but
> go down again within a few minutes.
>
> Running journalctl -xe gives these three messages:
>
> "failed to start Virtual Desktop Server Manager network restorati
Are you using Fibre Channel over Ethernet?
On Thu, 23 Mar 2017 09:25:04 +0200
martin chamambo wrote:
> I havent set up any hooks and when i try to assign logical networks
> to an already existing interface on the host ,it gives me this error
>
> Hook error: Hook Error: ('Traceback (most recent
On Tue, 28 Mar 2017 09:17:24 +0200
Gianluca Cecchi wrote:
> And I want to retain that vlan configuration.
Why not building the vlan configuration using oVirt?
> I remember a thread where something similar was referred, with a
> parameter inside vdsm.conf, but I'm not able to find it...
> I don'
le.
>>
>> Can you guide me which log reports the out-of-sync in order to further
>> investigate.
>>
>
> +Miguel Duarte de Mora Barroso , +Dominik Holler
> can you please help here?
>
>
>
Do you remember if there was a hint shown as a tooltip if you hover
I'm not sure how close is this one.
>
> Best Regards,
> Strahil Nikolov
> On Nov 2, 2019 09:50, Strahil Nikolov wrote:
>
> I saw the hint in the Cluster's tab and then on each host. I had to put
> the host back to maintenance in order to sync it again.
>
> Lo
On Wed, Nov 6, 2019 at 7:54 AM wrote:
> When I create a new logical network , the option is :
> Select the "Create on external provider" check box, the External Provider
> is "ovirt-provider-ovn".
> Leaving Connect to physical network unselected.
>
This way the network would be available only f
The output of "tcpdump -i ovirtmgmt -pvn port 67 and port 68" in
https://pastebin.com/a2DEyL0e looks like the DHCP reply does not reach the
ovirtmgmt bridge.
Is the ovirtmgmt bridge / network attachment on the host able to receive
configuration by DHCP?
On Wed, Nov 6, 2019 at 7:08 PM wrote:
> H
On Thu, Nov 7, 2019 at 3:45 AM wrote:
> What is the auth host name and the provider url of the ovirt-provider-ovn
> in engine?
>
> The provider url of ovirt-provider-ovn in engine is :
> https://ovirt-manager:9696/
>
> When I access https://ovirt-manager:9696/ , it show :
> {
> "error": {
>
On Thu, Nov 7, 2019 at 3:07 AM wrote:
> What I hope to do is that the two NICs of the virtual machine are on the
> same network segment as the two NICs on the node. For example, the two IPs
> on node are 172.16.100.10 and 172.16.131.20 respectively. I hope the effect
> is the IP of the virtual m
On Mon, Nov 11, 2019 at 12:34 PM Christian Reiss
wrote:
> Hey folks,
>
> for production use quality it is recommended to have backend (storage)
> and front end seperated. Let' assume:
>
> - 85.0.0.0/24 public IP block
> - 10.100.0.0/24 private IPs for DC internal usage
> - 10.200.0.0/24 pri
On Sun, Nov 10, 2019 at 3:30 PM Istiaque Islam wrote:
> Hi there,
>
> I have installed oVirt on a server and related ISO and Data domains.
> I can create Virtual Machines and that machine get access to internet to
> download things.
> What I want to do now :
> 1. create an web server using cento
On Thu, Nov 14, 2019 at 10:21 AM wrote:
> Strahil. I follow your method.
>
> When I press the button "sync all networks" . It report error:
> Error while executing action SyncAllHostNetworks: Network is currently
> being used.
>
> How can I solve this problem ?
>
There should be a more detaile
On Mon, Nov 18, 2019 at 10:32 PM Dirk Streubel
wrote:
> Hi,
>
> thanks a lot for the quick answers. So, my Server Management will run on
> another machine, not a pi4 :)
>
> But i have still the problem with the integration with a host. Always the
> same error of the host side.
>
> Maybe my hardwa
et us know if you notice that a step missing in the docs (or other
bugs).
> Thanks a lot for your help Dominik
>
> Regards
>
> Dirk
>
>
>
> Am 20.11.19 um 08:25 schrieb Dominik Holler:
>
>
>
> On Mon, Nov 18, 2019 at 10:32 PM Dirk Streubel
> wrote
On Thu, Nov 21, 2019 at 9:00 AM wrote:
> Hello.
> Can someone explain how to attach logical network to host via ovirtsdk?
>
As a python snippet, attaching a network looks like this:
hosts_service = connection.system_service().hosts_service()
host = hosts_service.list(search='name=ovirt-node-ng-
On Mon, 02 Dec 2019 01:33:37 +0530
Vijay Sachdeva wrote:
> Thanks for replying, I have single host with 4 interfaces. Two of the
> interfaces are bonded and connected to bridge “ovirtmgmt” and other
> bridge(VLAN based).
>
What is the expected flow of the frames on the host?
e.g.:
ping requ
On Tue, Dec 3, 2019 at 4:41 PM wrote:
> Hi, I want to use External Logical Networks Openstack Neutron. For this it
> is necessary to have all Openstack installed or is it possible to have only
> Neutron and used as a service?
Only Neutron is required.
If you want to create a lab install, the fo
On Fri, Dec 6, 2019 at 2:59 PM Vijay Sachdeva
wrote:
> Hello,
>
>
>
> I am trying to convert a Hyper-V guest VM to run on KVM using virt-v2v
> utility.
>
>
>
> Getting below error:
>
>
>
>
>
> Any suggestions how to solve this.
>
>
Would full Windows shutdown, e.g. by "shutdown /s /f /t 0" solve
On Fri, Dec 6, 2019 at 3:44 PM wrote:
> Hi Joseph, I did that but the problem is that I have an ovirtmgmt network
> by default and another network that is a VLAN, VLAN 5 exactly. But VMs that
> are in VLAN 5 cannot go outside.
If the route to outside is via untagged network, VLAN 5 should not a
On Sun, Dec 8, 2019 at 8:05 PM Johns wrote:
> Hi all,
>
> I just tried to use oVirt in multi-server, Manager in one VM and Host in a
> dedicated machine, every time I try to attach host I get this error.
>
> networks, the following networks are missing on host: 'ovirtmgmt'
>
> I have created a br
On Wed, Dec 11, 2019 at 1:21 PM Pavel Nakonechnyi
wrote:
> Dear oVirt Community,
>
> From my understanding oVirt does not support Open vSwitch IPSEC tunneling
> for GENEVE traffic (which is described on pages
> http://docs.openvswitch.org/en/latest/howto/ipsec/ and
> http://docs.openvswitch.org/e
On Wed, Dec 11, 2019 at 12:12 PM wrote:
> Hi all
>
> I have a VM network created with some hosts and I have included a vyos
> router acting as a Layer 2 extension to another hypervisor through VXLAN.
>
>
This sounds interesting, but might be not supported by oVir. Can you share
details?
What is
The cleanest way to clean up is to remove all entities on the OpenStack
Network API on ovirt-provider-ovn, e.g. by something like
https://gist.github.com/dominikholler/19bcdc5f14f42ab5f069086fd2ff5e37#file-list_security_groups-py-L25
This should work, if not, please report a bug.
To bypass the ovi
On Wed, Dec 11, 2019 at 5:31 PM wrote:
> We currently have 2 bare metals.
> One holds the ovirt and the other proxmox.
>
> As to enable high availability and config sync on the proxmox hosted VMs
> we have deployed VyOS on both hyper-visors.
>
>
Is VyOS installed on the host, or in a VM?
> We t
On Thu, Dec 12, 2019 at 10:06 AM Pavel Nakonechnyi
wrote:
> On Wednesday, 11 December 2019 16:37:50 CET Dominik Holler wrote:
> > On Wed, Dec 11, 2019 at 1:21 PM Pavel Nakonechnyi
> >
>
> > > Are there plans to introduce such support? (or explicitly not to..)
> &
On Thu, Dec 12, 2019 at 12:20 PM Pavel Nakonechnyi
wrote:
> On Thursday, 12 December 2019 10:23:28 CET Dominik Holler wrote:
> > On Thu, Dec 12, 2019 at 10:06 AM Pavel Nakonechnyi
> > > Could you direct me to the part of oVirt system which handles OVS
> tunnels
> >
On Thu, Dec 12, 2019 at 11:29 AM wrote:
> > On Wed, Dec 11, 2019 at 5:31 PM >
> > Is VyOS installed on the host, or in a VM?
> >
> VyOS is installed on the ovirt node
> >
> >
> > Does this mean that the VyOS VM on oVirt should forward layer 2 traffic
> to
> > the VyOS VM on proxmox?
> > Is there
On Thu, Dec 12, 2019 at 4:27 PM wrote:
> > On Thu, Dec 12, 2019 at 11:29 AM >
> >
> > I see.
> > This will create an external OVN network.
> > As far as I know, OVN networks do not allow mac spoofing, even if port
> > security is disabled.
> >
> I have installed the vdsm hook for allow both prom
https://github.com/oVirt/ovirt-system-tests/blob/master/network-suite-master/control.sh#L20
> Can't I just undeploy the ovn and then redeploy it back ?
>
No idea, I never tried this.
In doubt, you can deleter one entity after another via ovn-nbctl.
> Best Regards,
> Strahil
Nikolov
> On Dec 12, 2019 20:49, Strahil wrote:
>
> Hi Dominik,
>
> Thanks for the reply.
>
> Sadly the openstack module is missing on the engine and I have to figure
> it out.
>
> Can't I just undeploy the ovn and then redeploy it back ?
>
> Best Regards,
On Fri, Dec 13, 2019 at 8:41 AM wrote:
> Hi,
>
> We are running CentOS and ovirt 4.3.4. We currently have four nodes and
> have set up the networks as follows:
>
> ovirtmanagmeent network - set up as a tagged vlan with a static IP
> SAN network - set up as a tagged vlan with a static IP
> student
On Fri, Dec 13, 2019 at 3:56 PM wrote:
> > On Thu, Dec 12, 2019 at 4:27 PM >
> >
> >
> > Not external logical networks, with vNIC profiles, have no network filter
> > during the VM is started (or the vNIC is hotplugged),
> > allows any MAC address. This works without any hook required.
> > In mo
>
>
> Is it possible to remove the vNICs , Virtual Network + and recreate the
> ovn db to start over ?
>
@Miguel Duarte de Mora Barroso Is there a hardcore
way bypassing ovirt-provider-ovn to do this?
> I guess the other option is to create a VM that can be used to install
&g
.1.41"}
> fake_bridge : false
> interfaces :
> [ed442077-f897-4e0b-97a1-a8051e9c3d56]lacp: []
> mac : []
> name: "ovn-566849-0"
> other_config: {}
> protected : false
> qos : [
Hello Paul,
On Mon, Jan 13, 2020 at 3:46 PM wrote:
> Hello I was testing the ovirt-provider-ovn which was working but at some
> point seems to have stopped.
>
>
Sounds like the ovn-controller on the hosts has a problem.
Please ensure that the ovn-controller is running on all relevant hosts.
If
On Mon, Jan 20, 2020 at 2:34 PM Milan Zamazal wrote:
> Ben writes:
>
> > Hi Milan,
> >
> > Thanks for your reply. I checked the firewall, and saw that both the
> bond0
> > interface and the VLAN interface bond0.20 had been added to the default
> > zone, which I believe should provide the necessa
On Fri, Jan 31, 2020 at 9:56 AM Vrgotic, Marko
wrote:
> Dear Yedidyah,
>
> We are actually seeing collisions, which is why I reached out in first
> place.
> Strange is that is did not happen since few weeks ago, and since then I
> saw it multiple times.
>
I am interested in reproducing this issu
t; error = stream.connect()
> File "/usr/lib64/python2.7/site-packages/ovs/stream.py", line 802, in
> connect
> self.socket.do_handshake()
> File "/usr/lib/python2.7/site-packages/OpenSSL/SSL.py", line 1716, in
> do_handshake
> self._raise_ssl_e
On Mon, Feb 3, 2020 at 11:39 AM Strahil Nikolov
wrote:
> On February 3, 2020 11:23:57 AM GMT+02:00, Dominik Holler <
> dhol...@redhat.com> wrote:
> >On Wed, Oct 2, 2019 at 12:29 PM Mail SET Inc. Group
> >wrote:
> >
> >> --reconfigure-optional-components
On Mon, Feb 3, 2020 at 1:07 PM wrote:
> Hi Dominik!
> So, this solution helps!
> But, if i do step #7 it returns to pervious (bad) state and i need to do
> all 6 steps again.
>
Step 7 is now independent from the other steps.
You are welcome to post the error message where the certificates fail.
.1217
> WJ Hilversum, The Netherlands. The information contained in this message
> may be legally privileged and confidential. It is intended to be read only
> by the individual or entity to whom it is addressed or by their designee.
> If the reader of this message is not the intended r
On Fri, Feb 7, 2020 at 3:26 PM wrote:
> Hello,
> I am a student and as a school project i have to make virtual environment
> using oVirt. I just installed the oVirt-engine with the recomended
> configuration in the documentation and when i try to make a new host i got
> this error:
> Error while
On Wed, Feb 26, 2020 at 4:45 PM wrote:
> I have a Windows Deployment server that works with Hyper-V. I am tryng to
> see if it will bare metal provision to Ovirt.
Do you want to provision Windows into an oVirt VM?
> I have the necessary drivers loaded
I am not familiar with the Windows depl
On Wed, Feb 26, 2020 at 10:16 AM Gianluca Cecchi
wrote:
> Hello,
> I have an environment with oVirt 4.3.8.
> All seems ok from a configuration point of view, but if I use OVN based
> interfaces on two VMs, they are not able to ping, both if I put them on the
> same host and if I put on different
On Wed, Feb 26, 2020 at 11:45 PM wrote:
> It is a Red Hat Virtio Ethernet Adapter.
>
>
>
Would a e1000 or rtl8139 work for your scenario?
> Eric Evans
>
> Digital Data Services LLC.
>
> 304.660.9080
>
>
>
> *From:* Dominik Holler
> *Sent:* Wednesd
On Wed, Feb 26, 2020 at 7:02 PM Gianluca Cecchi
wrote:
> On Wed, Feb 26, 2020 at 6:01 PM Dominik Holler wrote:
>
>>
>>
>> On Wed, Feb 26, 2020 at 10:16 AM Gianluca Cecchi <
>> gianluca.cec...@gmail.com> wrote:
>>
>>> Hello,
>>> I h
On Sat, Feb 29, 2020 at 9:03 PM wrote:
> When I attach a vnic to a vm and try to start it I get the following
> message:
>
>
>
>- Cannot run VM. There is no host that satisfies current scheduling
>constraints. See below for details:
>- The host kvm04 did not satisfy internal filter N
tal Data Services LLC.
>
> 304.660.9080
>
>
>
> *From:* Dominik Holler
> *Sent:* Tuesday, March 03, 2020 6:03 AM
> *To:* eev...@digitaldatatechs.com
> *Cc:* users
> *Subject:* [ovirt-users] Re: subnets
>
>
>
>
>
>
>
> On Sat, Feb 29, 2020 at 9:03
On Fri, Mar 6, 2020 at 1:35 AM Nir Soffer wrote:
> On Thu, Mar 5, 2020 at 1:16 PM wrote:
> >
> > I began use ovirt recently. I tried create one VM on ovirt plateform.
> But I nerver start VM. I had the message like:
> >
> > L'hôte x..fr n'a pas pu satisfaire le filtre Network de type
> i
On Mon, Mar 16, 2020 at 2:15 PM lifuqi...@sunyainfo.com <
lifuqi...@sunyainfo.com> wrote:
>
> Hi All,
> I found that there is rarely topics about supporting dpdk in ovirt 4.2
>
>
What is your motivation to have a look at dpdk?
> in Internet except
> https://blogs.ovirt.org/2018/07/upgraded-
On Tue, Mar 17, 2020 at 2:49 PM Li Xo wrote:
> Hello,
> I need to replicate some file servers that must have the same MAC address
> to work properly and which will be placed on different VLANs to avoid MAC
> conflicts.
> With VMware and VirtualBox this is quite simple and works without
> particul
Port security requires subnets.
Can you please ensure that you used an external network with port security
explicitly disabled?
In doubt, please create a new external network with port security
explicitly disabled and try again with the new network?
On Tue, Mar 31, 2020 at 2:16 PM Tommaso - Shellr
YC:EPYC:x86_64; '
> || '4:Secure AMD
> EPYC:svm,nx,ibpb,ssbd,model_EPYC:EPYC,+ibpb,+virt-ssbd:x86_64; '
> || '1:IBM POWER8:powernv,model_POWER8:POWER8:ppc64; '
> || '2:IBM POWER9:powernv,model_POWER9:POWER9:ppc64; '
> || '1:IBM z114, z196:sie,mo
custom created network filters through oVirt?
>
>
> +Dominik Holler have you any link at hand for this?
>
>
Custom network filters are not supported and documented, but should work.
Probably you are already aware of
https://libvirt.org/formatnwfilter.html
which describes how to ad
On Thu, Apr 30, 2020 at 8:43 AM Hendrik Peyerl wrote:
> Thank you Dominik, are there any plans to add such a feature in the future?
>
>
No.
What could oVirt do, to make this flow more comfortable?
> Thanks,
> Hendrik
>
> > On 29. Apr 2020, at 21:25, Dominik Holler w
On Wed, May 6, 2020 at 9:50 AM Nathanaël Blanchet wrote:
> Hello,
>
> Centos 8 stream should be the preview of centos 8, so why not using
> right now it instead of waiting GA 8.2?
>
>
Currently there is
https://bugzilla.redhat.com/1832725
> --
> Nathanaël Blanchet
>
> Supervision réseau
> SIR
On Mon, May 11, 2020 at 12:31 PM Giorgio Biacchi
wrote:
> Hi list,
> I've spent a couple of days trying to understand why this was happening...
>
> For the installation I have a well tested installation server with a
> custom kickstart file to setup ssh keys and custom hooks for infiniband
> and
On Tue, May 12, 2020 at 8:49 AM Giorgio Biacchi wrote:
> On 5/11/20 5:53 PM, Dominik Holler wrote:
> >
> >
> > On Mon, May 11, 2020 at 12:31 PM Giorgio Biacchi > <mailto:gior...@di.unimi.it>> wrote:
> >
> > Hi list,
> > I've
On Tue, May 12, 2020 at 4:25 PM Giorgio Biacchi wrote:
> On 5/12/20 12:28 PM, Dominik Holler wrote:
> >
> >
> > On Tue, May 12, 2020 at 8:49 AM Giorgio Biacchi > <mailto:gior...@di.unimi.it>> wrote:
> >
> > On 5/11/20 5:53 PM, Dominik Holler wro
On Wed, May 13, 2020 at 9:44 PM s.danzi wrote:
> Hi to all!
>
> I'm having an issue with networks bridges on ovirt node.
>
> It's look like this bug:
> https://bugzilla.redhat.com/show_bug.cgi?id=1279161
>
> On VM I have a bridge between a tap device and network interface. On node
> side the int
On Fri, May 15, 2020 at 9:35 AM Stefano Danzi wrote:
>
>
> Il 14/05/2020 20:13, Strahil Nikolov ha scritto:
> > On May 14, 2020 6:16:06 PM GMT+03:00, Stefano Danzi
> wrote:
> >>
> >> Il 14/05/2020 12:50, Dominik Holler ha scritto:
> >>&g
On Thu, May 14, 2020 at 8:33 PM wrote:
> So if I use this to build a VM and I setup Cloud_init to set user id and
> passwords.
> should I not be able to login to the VM from Console?
>
>
Yes, as long as the guest processes the information provided via cloud-init.
CentOS 7, CentOS 8 and Fedora cl
On Fri, May 15, 2020 at 2:41 PM Stefano Danzi wrote:
>
>
> Il 15/05/2020 14:29, Dominik Holler ha scritto:
>
>
>
> On Fri, May 15, 2020 at 9:35 AM Stefano Danzi wrote:
>
>>
>>
>> Il 14/05/2020 20:13, Strahil Nikolov ha scritto:
>> > On May 14,
again.
> Il 15/05/2020 15:10, Dominik Holler ha scritto:
>
>
> Hi! I have to check, but it is strange.
>>> Arp replies originated from the VM has not problems, only ARP replies
>>> that came from TAP device in VM where not forwarded to real LAN.
>>>
>
On Tue, May 19, 2020 at 1:25 PM Matthias Leopold <
matthias.leop...@meduniwien.ac.at> wrote:
> Hi,
>
> I'm having a special issue with assigning logical networks to host
> interfaces via label.
> I'm used to assigning logical networks (tagged VLANs, VM network flag) a
> "Network label", which I ca
On Tue, May 26, 2020 at 4:18 PM Gianluca Cecchi
wrote:
> On Tue, May 26, 2020 at 4:14 PM Nir Soffer wrote:
>
>> On Tue, May 26, 2020 at 4:37 PM Gianluca Cecchi <
>> gianluca.cec...@gmail.com> wrote:
>>
>>> Hello,
>>> does oVirt 4.4. support management network distributed between routed
>>> netwo
On Tue, May 26, 2020 at 5:03 PM Gianluca Cecchi
wrote:
>
>
> On Tue, May 26, 2020 at 4:22 PM Dominik Holler wrote:
>
>>
>>
>> On Tue, May 26, 2020 at 4:18 PM Gianluca Cecchi <
>> gianluca.cec...@gmail.com> wrote:
>>
>>> On Tue, May 26, 2
On Tue, May 26, 2020 at 6:20 PM Gianluca Cecchi
wrote:
> On Tue, May 26, 2020 at 6:02 PM Dominik Holler wrote:
>
>>
>>> Based on this thread in late 2017
>>>
>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/T7RGXRNY24OV2F2PTXIVA6NN636HP
On Thu, May 28, 2020 at 10:02 PM Me wrote:
> Hi All
>
> Not sure where to start, but here goes.
>
> I'm not totally new to oVirt, I used RHEV V3.x in production for several
> years, it was a breeze to setup.
>
> Installing 4.4 on to a host with local SSD and FC for storage.
>
> Issue 1, having se
Hello,
CentOS 8.2 was released before oVirt was prepared for CentOS 8.2 .
Currently oVirt-4.4 fails to install on CentOS 8.2 .
This will be fixed soon.
Dominik
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Yes, this is because of Centos moving from 8.1.1911 to 8.2.2004
On Mon, Jun 15, 2020 at 10:11 PM Glenn Marcy wrote:
> I hope this situation settles down before rc5
>
>
This will be fixed quickly.
> trying to run 4.4.1-rc4 hosted engine setup, got
>
> [ ERROR ] fatal: [localhost -> ovirt-engin
On Mon, Jun 15, 2020 at 10:20 PM Dominik Holler wrote:
> Hello,
> CentOS 8.2 was released before oVirt was prepared for CentOS 8.2 .
> Currently oVirt-4.4 fails to install on CentOS 8.2 .
> This will be fixed soon.
>
An updated version of ovn and ovs is available already on some
Hello Mark,
can you please share the relevant lines of supervdsm.log from the host?
Helpful to understand the intended change are the lines starting with the
relevant "call setupNetworks",
including the line containing "Desired state"
until some lines below "Unexpected failure of libnm when running
On Thu, Jun 25, 2020 at 12:02 PM wrote:
> Hi - during the last reboot all my ovn networks appeared in oVirt but
> weren't reflected on the physical host, no VMs would boot that had an OVN
> network attached.
>
>
Do you still have the ovn-controller.log from a host of this situation?
> I was loo
Can you connect to http://hostname:8080/ovirt-engine/api/ using this
credentials?
Even if the already posted stacktrace looks like expected, maybe you
can share your /etc/ovirt-provider-ovn (without
ovirt-sso-client-secret, which seems to be correct)?
Thanks,
Dominik
On Tue, 14 Nov 2017 09:51:27
Do you use oVirt Self-Hosted Engine?
On Fri, 24 Nov 2017 15:23:47 -0200
Emerson Jr wrote:
> Hi,
>
> I'm having a hard time understanding what happened after I configured
> oVirt network ("bridge" on the CentOS), it changed the routes metric
> and now I can't access my oVirt portal from another
Is there an indication that the VMs will not take advantage of 10Gb?
On Thu, 7 Dec 2017 15:27:25 -0700
Beau Sapach wrote:
> Hello everyone,
>
> I see here:
> https://www.ovirt.org/blog/2017/09/introducing-ovirt-4.2.0/ that
> version 4.2 will have OVN support. Does anyone know if this will
> al
ck is, possibly in the VirtIO driver.
>
> Beau
>
> On Mon, Dec 11, 2017 at 1:23 AM, Dominik Holler
> wrote:
>
> > Is there an indication that the VMs will not take advantage of 10Gb?
> >
> > On Thu, 7 Dec 2017 15:27:25 -0700
> > Beau Sapach wrote:
> &
>
> > I'm not sure where the bottleneck is, possibly in the VirtIO driver.
> >
> > Beau
> >
> > On Mon, Dec 11, 2017 at 1:23 AM, Dominik Holler
> > wrote:
> >
> >> Is there an indication that the VMs will not take advantage of
> >
On Tue, 19 Dec 2017 18:03:54 +0200
andreil1 wrote:
> Hi,
>
> I have oVirt node running on internal network, address range
> 192.168.0.x, and need to install virtualized server on DMZ zone
> 192.168.1.x. Server has several NICs. DMZ NIC will be connected
> directly to router with firewall. What i
Yes, the service is required to provide LLDP information and is a
dependency of the vdsm-network package.
Is this uncomfortable for you?
On Mon, 22 Jan 2018 11:31:39 +0200
Andrei V wrote:
> Hi,
>
> Does lldpad.service (Link Layer Discovery Protocol) needed for oVirt
> node ?
>
> Thanks
>
>
>
On Mon, 22 Jan 2018 21:31:52 +0200
Andrei V wrote:
> On 01/22/2018 07:15 PM, Dominik Holler wrote:
> > Yes, the service is required to provide LLDP information and is a
> > dependency of the vdsm-network package.
> > Is this uncomfortable for you?
>
> It crashes on my
The ovirt-provider-ovn implements parts of OpenStack Networking API
(Neutron). This way every client for OpenStack Networking API may work
for the features which are already implemented by ovirt-provider-ovn.
I successfully used the neutron cli, e.g. by
OS_PASSWORD=xxx OS_AUTH_URL=https://0.0.0.0:3
On Mon, 12 Feb 2018 16:09:59 -0800
Tim Thompson wrote:
> All,
>
> I was wondering if someone can point me in the direction of the
> documentation related to defining custom network filters (nwfilter)
> in 4.2. I found the docs on assigning a network filter to a vNIC
> profile, but I cannot find
On Fri, 23 Feb 2018 14:57:05 +0100
Gianluca Cecchi wrote:
> Hello,
> in my events pane of 4.2.1 I see, every 5 minutes, this event
>
> Networks of Provider ovirt-provider-ovn were successfully
> synchronized.
>
> that fills so my table and prevent easy reading of other ones...
> Can I disable o
On Thu, 15 Mar 2018 09:09:41 +
Fabien Carré wrote:
> Hello,
> I am trying to set up an oVirt environment using OVH servers. So far
> I have installed an engine (4.2) and a node. The node is attached to
> a NAS through a vRack
> https://www.ovh.co.uk/solutions/vrack/network-technology.xml. I a
On Fri, 16 Mar 2018 12:46:13 +0200
Kapetanakis Giannis wrote:
> Hi,
>
> After upgrading to 4.2.1 I have problems with ovn provider.
> I'm getting "Failed to synchronize networks of Provider
> ovirt-provider-ovn."
>
> I use custom SSL certificate in apache and I guess this is the reason.
>
> I'
On Fri, 16 Mar 2018 17:46:36 +0200
Kapetanakis Giannis wrote:
> On 16/03/18 17:40, Kapetanakis Giannis wrote:
> > On 16/03/18 15:21, Dominik Holler wrote:
> >> On Fri, 16 Mar 2018 12:46:13 +0200
> >> Kapetanakis Giannis wrote:
> >>
> >>>
On Wed, 21 Mar 2018 05:30:25 +
Nicolas Vaye wrote:
> Hi,
>
> i want to change the network name of the existing nic for a VM with
> python SDK API ? Can i have some help please ?
>
> the VM name is testnico
> the nic name is nic1
> the new network name is vlan_NEW
>
> and here is the source
On Wed, 4 Apr 2018 13:29:56 +0200
Stefan Wendler wrote:
> Hi,
>
> I am currently trying to attach Glance (OpenStack Image) and Cinder
> (OpenStack Volume) as external provider and am facing a problem when
> trying to use https in the Provider-URL on an ovirt 3.6 and 4.1
> cluster.
>
> The Provi
On Wed, 4 Apr 2018 11:19:33 -0700
Cole Johnson wrote:
> Hello,
> I am trying to set up a 3 host gluster hyperconverged self hosted
> engine running on oVirt Nodes. ( I think that I have all of the
> buzzwords here) All of the hardware is the same. I am using the guide
> from here:
> https://www.
27;t this the whole point of what I am trying to do here? I
> have attached some screenshots of the different messages that I
> encounter.
>
> On Mon, Apr 9, 2018 at 12:54 AM, Dominik Holler
> wrote:
> > On Wed, 4 Apr 2018 11:19:33 -0700
> > Cole Johnson wrote:
>
On Tue, 10 Apr 2018 11:48:50 +
Vasily Lamykin wrote:
> Hi, all
> I try to configure ovn in engine, what I do by step:
> 1.Created network test1 with external ovn provider on engine1
> 2.Created subnet for this network
> 3.Connect engine2 to engine1 ovn provider(through “add provider”)
> 4.Suc
On Thu, 12 Apr 2018 13:57:45 +0200
Martin Perina wrote:
> On Thu, Apr 12, 2018 at 1:04 PM, Martin Perina
> wrote:
>
> >
> >
> > On Thu, Apr 12, 2018 at 12:44 PM, Eitan Raviv
> > wrote:
> >> The recurring denied access for every SyncNetworkProvider might be
> >> because you changed the admin p
On Mon, 16 Apr 2018 13:20:18 +0300
Andrei Verovski wrote:
> Hi,
>
> I have simple cluster with node11 having 2nd network for DMZ zone
> (for internet servers). This network attached to node11 2nd ethernet
> adapter called ‘DMZ_node11’.
>
> Now I’m trying to add 2nd host to the cluster (node12).
I created https://bugzilla.redhat.com/1568413 to track the issue.
On Thu, 12 Apr 2018 13:57:45 +0200
Martin Perina wrote:
> On Thu, Apr 12, 2018 at 1:04 PM, Martin Perina
> wrote:
>
> >
> >
> > On Thu, Apr 12, 2018 at 12:44 PM, Eitan Raviv
> > wrote:
> >> The recurring denied access for ever
I created https://bugzilla.redhat.com/1568413 to track the issue.
On Thu, 12 Apr 2018 13:57:45 +0200
Martin Perina wrote:
> On Thu, Apr 12, 2018 at 1:04 PM, Martin Perina
> wrote:
>
> >
> >
> > On Thu, Apr 12, 2018 at 12:44 PM, Eitan Raviv
> > wrote:
> >> The recurring denied access for ever
1 - 100 of 299 matches
Mail list logo
