Disk is ide
Graphics is spice
Is type is win2k3
Does't goes to safe mode.
-Nagaraju
On Dec 4, 2015 9:30 PM, "Michal Skrivanek"
wrote:
>
> > On 04 Dec 2015, at 12:15, Budur Nagaraju wrote:
> >
> > Hi
> >
> > I have converted win2k3 which was
I have tried all the options but no luck ,can you pls update the command to
collect the logs ?
On Fri, Dec 4, 2015 at 9:42 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
>
> On 04 Dec 2015, at 17:05, Budur Nagaraju wrote:
>
> Disk is ide
> Graphics is spic
HI
Pls let me know how to take backup of vms and restore in oVirt ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Is there a way to export to qcow format ?
On Tue, Dec 8, 2015 at 2:49 PM, wrote:
> Hi,
>
> even online fullbackup's, e.g. :
>
> https://github.com/wefixit-AT/oVirtBackup
>
>
> Tschau,
> Emanuel
>
>
>
> Von: Fred Rolland
> An:
HI
If the kvm server from which hosted engine is pushed goes down will it
affect to the engine ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI
Need some clarification , if I copy the deployed vms from the storage to
another storage by using the backup tools will be able to deploy the backed
up vms in another engine ?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listi
HI
Need info on how many nodes and vms are supported in one single oVirt
engine ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI
Installed KVM in the host in which VT is enabled .
installed one vm centos6.7 64 bit in the KVM server and tried to
configure Hosted engine ,getting the below error ,
*"Failed to execute stage ‘Environment Customization’: Hardware
virtualization support is not available :please check BIOS se
, Simone Tiraboschi
wrote:
>
>
> On Wed, Dec 2, 2015 at 12:19 PM, Budur Nagaraju wrote:
>
>> I have installed KVM in the nested environment in ESXi6.x version is
>> that recommended ?
>>
>
> I often use KVM over KVM in nested environment but honestly I neve
Is there any command to check KVM is available or not ?
Below is the output when I run the rpm command.
[root@he /]# rpm -qa |grep kvm
qemu-kvm-rhev-0.12.1.2-2.479.el6_7.2.x86_64
On Mon, Jan 4, 2016 at 8:24 PM, Simone Tiraboschi
wrote:
>
>
> On Mon, Jan 4, 2016 at 3:06 PM, Budur
I get the below out put ,
[root@he ~]# lsmod |grep kvm
kvm_intel 55624 0
kvm 345460 1 kvm_intel
On Tue, Jan 5, 2016 at 12:06 AM, Budur Nagaraju wrote:
> Is there any command to check KVM is available or not ?
>
> Below is the output when I run the rp
HI
After installation of Hosted-Emgine ,I have rebooted the vm and getting the
following error.
[root@He ~]# hosted-engine --vm-status
Failed to connect to broker, the number of errors has exceeded the limit (1)
Cannot connect to the HA daemon, please check the logs.
[root@He ~]#
Can someone he
ill this harm engine ? is it safe to use this command ?
[root@He ~]# hosted-engine --vm-start
VM exists and is down, destroying it
Machine destroyed
On Tue, Jan 5, 2016 at 1:16 PM, Yedidyah Bar David wrote:
> On Tue, Jan 5, 2016 at 8:06 AM, Budur Nagaraju wrote:
> > HI
> >
>
Installed hosted engine and configured ovirt engine on it and issue is
after sometime ovirt engine is automatically getting rebooted ,can you pls
help me .
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/us
Below are the logs attached.
http://pastebin.com/R196v3BQ
On Tue, Jan 5, 2016 at 2:40 PM, Yedidyah Bar David wrote:
> On Tue, Jan 5, 2016 at 11:03 AM, Budur Nagaraju wrote:
> > Installed hosted engine and configured ovirt engine on it and issue is
> after
> > someti
Logs when the ovirt engine automatically rebooted.
http://pastebin.com/jern5Ucs
On Tue, Jan 5, 2016 at 2:46 PM, Budur Nagaraju wrote:
> Below are the logs attached.
>
> http://pastebin.com/R196v3BQ
>
> On Tue, Jan 5, 2016 at 2:40 PM, Yedidyah Bar David
> wrote:
>
>>
HI
What is the command to execute in the hosted engine to get the below
options ?
Engine health status page is not yet reachable.
To continue make a selection from the options below:
(1) Continue setup - engine installation is complete
(2) Power off and restart the
HI
Getting the below error while adding node to the OE which is created from
Hosted eghine.
2016-01-06 10:50:49,404 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-83) [7ce02003] Host
3577e25f-e25e-425d-82ac-f6c3502a281e : infraesx2 is already in
NonOpe
http://pastebin.com/jQiuHhZz
On Wed, Jan 6, 2016 at 10:57 AM, Budur Nagaraju wrote:
> HI
>
> Getting the below error while adding node to the OE which is created from
> Hosted eghine.
>
>
> 2016-01-06 10:50:49,404 INFO
> [org.ovirt.engine.core.vdsbro
of the hosts in your cluster?
>
> On Wed, Jan 6, 2016 at 7:59 AM, Budur Nagaraju wrote:
>
>>
>>
>> http://pastebin.com/jQiuHhZz
>>
>> On Wed, Jan 6, 2016 at 10:57 AM, Budur Nagaraju
>> wrote:
>>
>>> HI
>>>
>>> Getting the
On Wed, Jan 6, 2016 at 1:25 PM, Oved Ourfali wrote:
> All hosts (not VMs) in your cluster are centos 6.7?
>
> On Wed, Jan 6, 2016 at 9:52 AM, Budur Nagaraju wrote:
>
>> Os type is set to "other OS " and the centos 6.7 is installed
>>
>>
>> On We
.6.32 - 573.12.1.el6.x86_64
KVM Version: 0.12.1.2 - 2.479.el6_7.2
LIBVIRT Version: libvirt-0.10.2-54.el6_7.3
On Wed, Jan 6, 2016 at 1:34 PM, Budur Nagaraju wrote:
> As of now its showing only one hosts that is oVirt Engine and the moment I
> add second host its failing ,below are the OS vers
mix centos6 and 7 in the same cluster, in case
> that's what you did.
> On Jan 6, 2016 10:08, "Budur Nagaraju" wrote:
>
>> As of now its showing only one hosts that is Hosted Engine and the moment
>> I add second host its failing ,below are the OS version.
>&
can we migrate a Engine which is pushed by Hosted Engine to the other oVirt
node ? which is in same cluster ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
x27;m wrong.
>
> Regards,
> Maoir
>
>
>
> - Original Message -
> > From: "Budur Nagaraju"
> > To: "users"
> > Sent: Wednesday, January 6, 2016 11:23:48 AM
> > Subject: [ovirt-users] Hosted Engine
> >
> > can
Can someone help me in the issue ? This is blocking my testing .
On Jan 6, 2016 1:57 PM, "Budur Nagaraju" wrote:
> Hosted engine and and oVirt engine both are having Centos6.x version I
> mean Its (centos6.7) ,while second host am facing that issues.
>
> On Wed, Jan 6,
So in this case it won't migrate to ovirt node then?
On Jan 7, 2016 3:56 AM, "Patrick Russell"
wrote:
> Put the host it’s on into maintenance mode in the GUI. It will migrate to
> another HE host automatically.
>
>
> -Patrick
>
> From: on behalf of Budur Na
o the node which
has the version installed 3.5 (0.999.201509102313.el7.centos ?
On Thu, Jan 7, 2016 at 2:40 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
>
> On 07 Jan 2016, at 10:06, Budur Nagaraju wrote:
>
> Thanks for the update .
>
> Is there a way to mig
HI
I have added new HP blade as a ovirt node to the engine while deploying a
new instance in the newly added node vm is getting stuck ,serveral times
I have rebooted the node but no luck.
Below are the engine and node version.
Engine version :oVirt Engine Version: 3.5.5-1.el6
Node version:oVir
Below are the logs,
http://pastebin.com/zfFq8p59
On Mon, Feb 8, 2016 at 1:24 PM, Budur Nagaraju wrote:
> HI
>
> I have added new HP blade as a ovirt node to the engine while deploying a
> new instance in the newly added node vm is getting stuck ,serveral times
> I have reboot
Getting below logs for some reason, in the engine
[root@pscloud ~]# tail -f /var/log/ovirt-engine/engine.log
, sharedLocks= ]
2016-02-08 14:28:42,325 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
(org.ovirt.thread.pool-8-thread-43) Removing domain
fb15c568-f237-4de6-8954-5bcf0de20
Yes,.
On Mon, Feb 8, 2016 at 2:33 PM, Oved Ourfali wrote:
> Are you using the user portal?
>
> On Mon, Feb 8, 2016 at 11:00 AM, Budur Nagaraju wrote:
>
>>
>>
>> Getting below logs for some reason, in the engine
>>
>>
>> [root@pscl
any updates ?
On Mon, Feb 8, 2016 at 1:33 PM, Budur Nagaraju wrote:
>
> Below are the logs,
>
> http://pastebin.com/zfFq8p59
>
> On Mon, Feb 8, 2016 at 1:24 PM, Budur Nagaraju wrote:
>
>> HI
>>
>> I have added new HP blade as a ovirt node to the engine wh
HI
I have a new node to the engine while deploying a new vm in the node
getting the following error logs.
[root@pscloud ~]# tail -f /var/log/ovirt-engine/engine.log
2016-02-09 14:54:35,513 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-80) [51964130] V
HI
I have configured two storage Lun through NFS one is Master which is having
capacity of 2TB and the other is having 1TB.
Now the issue when ever user deploy a vm automatically vm is getting
deployed in master lun which is running out of HDD space and the vm is not
getting deployed in the other
;
>
> Regards,
> Idan
>
> On Mon, Mar 7, 2016 at 5:32 AM, Budur Nagaraju wrote:
>
>> HI
>>
>> I have configured two storage Lun through NFS one is Master which is
>> having capacity of 2TB and the other is having 1TB.
>>
>> Now the issue when
> domain, and then the new vm's disks will also be created on that domain.
>
>
> Regards,
> Idan
>
> On Mon, Mar 7, 2016 at 10:00 AM, Budur Nagaraju wrote:
>
>> But the users will be deploying the vms from the template and users are
>> not have Admin permiss
HI
Is there any API to check that what are all the vms deployed by a user ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi
Is there anyways to convert ovirt VM to kvm .IMG VM ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
fore.
> If you want to do the same with a block storage domain, you may use dd
> instead of rsync.
>
>
>
>
> Le 13/04/2016 16:27, Budur Nagaraju a écrit :
>
> I have exported VM to export domain,may I know the tools to or commands to
> convert ?
> On Apr 13, 2016 7:53
Thank you very much ! its working :)
On Wed, Apr 13, 2016 at 9:05 PM, Nathanaël Blanchet
wrote:
> No need to convert anything, a2ef36fa-ecfa-4138-8f19-2f7609276d4b is
> alreay the raw file you need. You can rsync it and rename it to myvm.img.
>
>
> Le 13/04/2016 17:28, Budur N
HI
I have configured oVirt with 1TB storage and created a storage quota
limited to 800GB beyond 800GB if any user creates a vms oVirt should not
allow to create a vm ,but still users are able to create .
is there any setting which I'm missing ?
Thanks,
Nagaraju
___
HI All,
Creating some user policies in oVirt ,which permissions do I need to
select so that users can choose the the quota while deploying the vms.
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi
How to set quota and assign permissions in oVirt 3.5 ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
resolve the issue ?
On Tue, Apr 19, 2016 at 8:42 PM, Roman Mohr wrote:
>
> Hi,
>
> On Tue, Apr 19, 2016 at 3:30 PM, Budur Nagaraju wrote:
>
>> Hi
>>
>>
>> How to set quota and assign permissions in oVirt 3.5 ?
>>
>> When you click on your datace
Hi
Getting the below error while installing the hosted engine
packages,installing oVirt3.5.
Total size: 76 M
Installed size: 281 M
Downloading Packages:
warning: rpmts_HdrFromFdno: Header V4 RSA/SHA256 Signature, key ID
d5dc52dc: NOKEY
Retrieving key from
https://download.gluster.org/pub/gluste
y
> (rsa.pub).
>
>
> The other question is: Is it safe to assume that the LATEST release
> of glusterfs in combination with a fixed release of oVirt is always
> a good idea?
>
> Cheers
> Richard
>
>
> On 04/21/2016 10:01 AM, Budur Nagaraju wrote:
> > Hi
HI
Installed hosted engine and after configuring IP to ovirt engine unable
to ping the gateway and found that there is no issue with the Network .
Is there any thing am missing while installing Hosted engine ? below is
output details,
--== CONFIGURATION PREVIEW ==--
Engine FQDN
~]#
[root@oe ~]#
[root@oe ~]# brctl show
bridge name bridge id STP enabled interfaces
[root@oe ~]#
On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David wrote:
> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju wrote:
> > HI
> >
> > Installed hosted engine a
HI
Any updates issue is blocking ?
Thanks,
Nagaraju
On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju wrote:
> Below are the details, unable to ping the gateway from the ovirt engine
> ,able to ping the ovirt engine from host as both are there in the same
> network.
>
>
> [r
I found the solution ,promiscuous mode was rejecting the packets this was
causing the issue ,enabled and now able to ping without any issues.
Thanks for the support !
On Fri, Apr 22, 2016 at 8:39 AM, Budur Nagaraju wrote:
> HI
>
> Any updates issue is blocking ?
>
> Thanks,
>
HI
I have configured hosted engine with two hosts ,one of the hosted engine is
down and unable to make it active .
Is there anyways to fix the issue ? I have restarted ha-agent and ha-broker
but no luck.
Thanks,
Nagaraju
___
Users mailing list
Users@ov
HI
I thought Its promiscuous mode issue ,after reboot of engine unable to
reach again ? is there anyways to resolve ?
Thanks,
Nagaraju
On Fri, Apr 22, 2016 at 11:45 AM, Budur Nagaraju wrote:
> I found the solution ,promiscuous mode was rejecting the packets this was
> causing the
I have created vms in the vmware ESXi.
Thanks,
Nagaraju
On Fri, Apr 22, 2016 at 3:38 PM, Simone Tiraboschi
wrote:
> On Fri, Apr 22, 2016 at 10:27 AM, Budur Nagaraju
> wrote:
> > HI
> >
> > I thought Its promiscuous mode issue ,after reboot of engine unable to
>
HI
One of the vm is showing "?" and unable to perform any actions below are
the logs ,let me know is there any ways to bring it back ?
2016-04-28 13:31:10,501 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand]
(org.ovirt.thread.pool-8-thread-39) [191cb679] Failed in DestroyVDS
Any commands to check the same ?
On Apr 28, 2016 5:10 PM, "Michal Skrivanek"
wrote:
>
> > On 28 Apr 2016, at 10:03, Budur Nagaraju wrote:
> >
> > HI
> >
> > One of the vm is showing "?" and unable to perform any actions below
> are
ovirt node is having 50vms and one VM is having issues, by restarting
libvirt will the other vms get affect? And am not getting the option to
delete.
On Apr 28, 2016 5:26 PM, "Michal Skrivanek"
wrote:
>
> > On 28 Apr 2016, at 13:49, Budur Nagaraju wrote:
> >
> >
Earlier it was working ,now not able to power on/off shutdown. deploy in
another host etc.
On Apr 28, 2016 5:38 PM, "Michal Skrivanek"
wrote:
>
> On 28 Apr 2016, at 14:01, Budur Nagaraju wrote:
>
> ovirt node is having 50vms and one VM is having issues, by restart
PM, "Michal Skrivanek"
wrote:
On 28 Apr 2016, at 14:11, Budur Nagaraju wrote:
Earlier it was working ,now not able to power on/off shutdown. deploy in
another host etc.
I don’t mean in ovirt, I mean the guest itself. Can you get to the console?
Can you ssh to that guest? Does it d
Thank you much for your support ,able to kill the process and now able to
perform all the functions in UI.
On Thu, Apr 28, 2016 at 6:01 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
>
> On 28 Apr 2016, at 14:18, Budur Nagaraju wrote:
>
> Not able to access th
Hi
Configured hosted engine it was up for few days and all of sudden oVirt
Engine went down and now unable to bring it up ,
below are the logs details,
http://pastebin.com/xXABPNhF
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.o
rote:
> On Sun, May 8, 2016 at 1:13 PM, Budur Nagaraju wrote:
> > Hi
> >
> > Configured hosted engine it was up for few days and all of sudden oVirt
> > Engine went down and now unable to bring it up ,
> >
> > below are the logs details,
> >
>
Hi
while doing yum install "yum -y install ovirt-engine" getting error which
url not found,can you please help me on that ?
http://pastebin.com/rX744rcW
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/u
to:users-boun...@ovirt.org] *On
> Behalf Of *Budur Nagaraju
> *Sent:* Wednesday, May 11, 2016 6:45 AM
> *To:* users
> *Subject:* [ovirt-users] ovirt-engine yum install
>
>
>
> Hi
>
> while doing yum install "yum -y install ovirt-engine" getting error wh
HI
When a deploy a vm from template its takes 10-15 Minutes to get deployed ,
is it a known one or any settings do i need to do ? am using oVirt3.5
version.
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/
HI Karli,
Template is created by selecting Thin provision ,while deploying am not
getting the options to select thin provision any help would really
appreciate .'
Thanks,
Nagaraju
On Fri, Jul 15, 2016 at 12:16 AM, Karli Sjöberg
wrote:
>
> Den 14 jul 2016 20:31 skrev Bud
HI
How to upgrade oVirt3.5 to 4 ? am using centos6.7.
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI
Is there a feature to lease the vms in oVirt ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
I want to restrict the vms to users for certain period , once the lease is
expired vm should automatically retire.
also is there a feature to assign quota of vms ?
Thanks,
Nagaraju
On Wed, Aug 10, 2016 at 5:58 PM, Nir Soffer wrote:
> On Wed, Aug 10, 2016 at 1:47 PM, Budur Nagaraju wr
HI
We have deployed 200 vms in oVirt , is there a way to export the vm names
along with owner names ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI All,
While configuring iSCSI LUN is not getting detected any documents to
configure iSCSI in oVirt ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
h1YSqhH
Thanks,
Nagaraju
On Tue, Sep 20, 2016 at 6:47 PM, Dan Yasny wrote:
> Can you describe what you tried to do and how it failed?
>
> On Tue, Sep 20, 2016 at 5:54 AM, Budur Nagaraju wrote:
>
>> HI All,
>>
>> While configuring iSCSI LUN is not getting detected
Yes I did that too but no luck :(
Thanks,
Nagaraju
On Tue, Sep 20, 2016 at 8:06 PM, Dan Yasny wrote:
> After you discover, did you also click the login button?
>
> On Tue, Sep 20, 2016 at 10:28 AM, Budur Nagaraju
> wrote:
>
>> Below are the Steps,
>>
>> Und
pastebin the output
>
> On Tue, Sep 20, 2016 at 10:54 AM, Budur Nagaraju
> wrote:
>
>> Yes I did that too but no luck :(
>>
>> Thanks,
>> Nagaraju
>>
>>
>> On Tue, Sep 20, 2016 at 8:06 PM, Dan Yasny wrote:
>>
>>> After you discove
Also, can you paste /proc/scsi/scsi and blkid
>
> On Tue, Sep 20, 2016 at 11:18 AM, Budur Nagaraju
> wrote:
>
>>
>> Below are the details,
>>
>> http://pastebin.com/aLBMH3Q6
>>
>> On Tue, Sep 20, 2016 at 8:27 PM, Dan Yasny wrote:
>>
>
Here is the output of of the commands /proc/scsi/scsi and blkid
http://pastebin.com/GgL61Wcu
On Tue, Sep 20, 2016 at 8:56 PM, Budur Nagaraju wrote:
> Noting more configuration ,if I configure openfiler as a iSCSI Lun able
> to detect the lun , moment I configure EMC Lun unable to dete
Hi
I have storage of 2TB lun and only 90 GB is free ,when I set a qouta limit
to 1800GB , it showing the 300GB available free space , any configs am
missing ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/list
HI
I have created a 2TB if iSCSI lun , when I migrate a vm which is created in
a nfs storage to iSCSI storage am not able to find the iSCSI Disk
profile any configs do I need to do ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lis
;
> On Mon, Sep 26, 2016 at 12:51 PM, Budur Nagaraju
> wrote:
>
>> HI
>>
>> I have created a 2TB if iSCSI lun , when I migrate a vm which is created
>> in a nfs storage to iSCSI storage am not able to find the iSCSI Disk
>
not 'Edit' under the VM disk sub-tab.
> I guess that by saying "move the vm" you're referring to move the VM disk
> right?
>
>
> On Mon, Sep 26, 2016 at 2:00 PM, Budur Nagaraju wrote:
>
>> HI
>>
>> I have added one more Disk profile in the
HI,
When deploying a vm from template ,getting the below error,anyways to
resolve the issue ?
Not enough MAC addresses left in MAC Address Pool.
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI Rafael,
I found the configure option but didn't find the option to increase the Mac
address pool.
can you please help me ?
Thanks,
Nagaraju
On Wed, Jan 11, 2017 at 4:57 PM, Rafael Martins wrote:
> - Original Message -
> > From: "Budur Nagaraju"
&
I'm using 3.5 version and getting below options and able to get the options
Mac address pools
Roles
System Permissions
Cluster Policies
Instance Type.
Thanks,
Nagaraju
On Wed, Jan 11, 2017 at 5:16 PM, Rafael Martins wrote:
>
>
> - Original Message -----
> > From: &quo
or create the MAC pool range via the
> engine-config:
>
> Example:
> engine-config -s MacPoolRanges=00:00:00:00:00:00-FF:FF:FF:FF:FF:FF
> restart engine service
>
> Good luck
>
> On Wed, Jan 11, 2017 at 1:57 PM, Budur Nagaraju wrote:
>
>> I'm using 3.
HI
While migrating vm to different node getting the error ,below are the
logs,can you please help me in resolving the issue?
http://pastebin.com/nvCHEtxE
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo
Hi Alon,
Thanks for your quick response,
How to resolve this ? in the ovirt portal I have not found the latest one
hypervisor node.
Thanks
On Sep 10, 2015 5:04 PM, "Alon Bar-Lev" wrote:
>
> - Original Message -
> > From: "Budur Nagaraju"
> >
Hi Alon,
No ISO is available in the mentioned URL.
Thanks,
Nagaraju
On Thu, Sep 10, 2015 at 5:15 PM, Alon Bar-Lev wrote:
>
>
> - Original Message -
> > From: "Budur Nagaraju"
> > To: "Alon Bar-Lev"
> > Cc: users@ovirt.org
&g
t; In the mean time, please retrieve the Node iso from:
> http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el7_merged/
> or
> http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el6_merged/
>
> - fabian
>
> > [1] http://resources.ovirt.org/pub/ovirt-3.5/iso/
thanks!
>
> - Original Message -
> > From: "Budur Nagaraju"
> > To: "Fabian Deutsch"
> > Cc: "Alon Bar-Lev" , users@ovirt.org
> > Sent: Wednesday, September 16, 2015 10:32:52 AM
> > Subject: Re: [ovirt-users] Issues while deploy
Thank you :)
On Wed, Sep 16, 2015 at 1:24 PM, Alon Bar-Lev wrote:
>
> That's strange!
> Will send you a test program offlist.
>
> - Original Message -----
> > From: "Budur Nagaraju"
> > To: "Alon Bar-Lev"
> > Cc: "Fabian Deu
HI
Can someone pls share the latest ovirt PDF installation configuring
document ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI
Unable to attach the ISO to the newly created datacenter,below are the logs,
[root@cstlb2 ~]# tail -f /var/log/ovirt-engine/engine.log
2015-09-18 12:50:08,493 ERROR
[org.ovirt.engine.core.bll.storage.ConnectStorageToVdsCommand]
(org.ovirt.thread.pool-8-thread-8) [303cb8a5] Transaction rolled-b
HI
Unable to access the web console of the vm ,asking for console.vv .
any pluggin needs to be installed ,using firefox latest version.
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI
After installing windows 7 OS in ovirt ,by default its creating the user id
as "user" ,May I know the default password for the vms ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi Alon,
Accepted the engine password.
Thanks
Nagaraju
On Sep 18, 2015 4:39 PM, "Alon Bar-Lev" wrote:
> Please try:
> 1. blank.
> 2. the engine admin password.
>
> I know recently sysprep default was modified to blank.
>
> - Original Message -
> >
HI
Required help in installaling guest tool ,can some one help me in getting
the ISO image ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI
Need some info on how to re register the vms on the new Engine ? if the
old Engine got corrupted.
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI
Can you pls provide me the info on how to import a vmware ova format to
ovirt format ?
Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
HI
Any updates ?
Thanks,
Nagaraju
On Mon, Sep 21, 2015 at 11:10 AM, Budur Nagaraju wrote:
> HI
>
> Can you pls provide me the info on how to import a vmware ova format to
> ovirt format ?
>
> Thanks,
> Nagaraju
>
>
_
Hi
While converting vwware to ovirt getting below error ,can someone help me ?
I have given the passowd in the file " $HOME/.netrc" ,
[root@cstnfs ~]# virt-v2v -ic esx://10.206.68.57?no_verify=1 -o rhev -os
10.204.206.10:/cst/secondary --network perfmgt vm
virt-v2v: Failed to connect to esx://10
1 - 100 of 209 matches
Mail list logo
