Was reading over this post to the group about storage options. I am more of
a windows guy as appose to a linux guy, but am learning quickly and had a
question. You said that LACP will not provide extra band with (Especially
with NFS). Does the same hold true with GlusterFS. We are currently
cal networks attached to the bond.
-Original Message-
From: Yaniv Kaul
To: Bryan Sockel
Cc: users
Date: Wed, 19 Apr 2017 10:41:40 +0300
Subject: Re: [ovirt-users] Best Storage Option: iSCSI/NFS/GlusterFS?
On Tue, Apr 18, 2017 at 9:57 PM, Bryan Sockel wrote:
Was reading over this p
Hi,
I discovered an issue with my LACP configuration and i am having trouble
figuring it out. I am running 2 Dell Powered 610's with 4 broadcomm nics.
I am trying to bond them together, however only one of the nics goes active
no mater how much traffic i push across the links.
I have spoken
interfaces. I would like to some how get my bond to use all 4 interfaces.
On reboot, it always seems to reset consistently to EM1.
-Original Message-
From: Konstantin Shalygin
To: users@ovirt.org, Bryan Sockel
Date: Thu, 20 Apr 2017 23:43:15 +0700
Subject: Re: Re: [ovirt-users] LACP Bonding
ers@ovirt.org [users@ovirt.org]
Date : Thursday, April 20 2017 17:40:25
Once upon a time, Bryan Sockel said:
> It seems that is some disconnect between my network bridge, the bond
and my
> interfaces. I would like to some how get my bond to use all 4
interfaces.
> On reboot, it always se
That was my next thought, wanted to see if there was another way before
I got to that point.
Original message
From: Derek Atkins
Date: 4/20/17 8:12 PM (GMT-06:00)
To: Bryan Sockel
Cc: Chris Adams , users@ovirt.org
Subject: Re: [ovirt-users] LACP Bonding issue
Hi,
Having an issue a template from a VM's.
I am getting the following errors:
engine.log
2017-05-02 09:40:10,059-05 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-24) [2ef2fce] EVENT_ID: USER_ADD_VM_TEMPLATE(48), Correlation
ID: 176fdfa7-0467-48f5
. How would i remove the reference to this storage
domain so it is not used?
-Original Message-
From: Shahar Havivi
To: Michal Skrivanek
Cc: Bryan Sockel , users
Date: Thu, 4 May 2017 08:19:34 +0300
Subject: Re: [ovirt-users] VM Template Error
According to the log the the storage
I am doing some testing with our current ovirt setup and i am seeing some
lagging going on when i attempt to launch or access files from a network
share, or even run windows updates.
My current setup is 4 X 1 GB Nic bond with multiple Vlan's attached. Server
usage is currently low. I have al
-Original Message-
From: Juan Pablo
To: Bryan Sockel
Cc: "users@ovirt.org"
Date: Wed, 10 May 2017 14:14:13 -0300
Subject: Re: [ovirt-users] Network Performance
Bryan, could you please elaborate your setup? do you see lag on your
virt-host or in your VM's? what have you
About what i would expect to see:
[ 3] local 10.20.101.207 port 43688 connected with 10.20.101.181 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 979 MBytes 820 Mbits/sec
-Original Message-
From: Juan Pablo
To: Bryan Sockel
Cc: users
Date: Wed, 10 May
Hey,
I am having an issue moving/copying vm's and templates around in my ovirt
environment. I am getting the following error in my VDSM Logs:
"2017-06-01 01:01:54,425-0500 ERROR (jsonrpc/5) [storage.Dispatcher]
{'status': {'message': "Storage domain does not exist:
(u'97258ca6-5acd-40c7-a812-b
ese issues. The problem always seems to happen when
finalizing the move or copy.
If it makes a difference the gluster storage we are coping to and from
are dedicated storage servers.
Original message
From: Maor Lipchuk
Date: 6/2/17 5:29 PM (GMT-06:00)
To: Bryan Sockel
Is there a way to enable multi monitor support when launching a RDP Session
through the user Portal?
Bryan Sockel
Systems Administrator
Alt-N Technologies | Grapevine, TX
Office 817.601.3222 x233
Sent using Alt-N's own MDaemon Messaging Server
Get to know the Alt-N family by liking
Is there any performance loss from your if your gluster replica 3 servers
are not all the same configuration?
Server 1 - Primary
16 X 1.2 TB 10k Drives - Raid 10 - Stripe 256k (2.5 Drives)
1 CPU - Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz
64 GB Memory
Server 2 - Replica
8 X 6 TB 7.5 RPM D
Have a question in regards to storage performance. I have a gluster replica
3 volume that we are testing for performance. In my current configuration
is 1 server has 16X1.2TB( 10K 2.5 Inch) drives configured in Raid 10 with a
256k stripe. My 2nd server is configured with 4X6TB (3.5 Inch Drive
Having some issues with my Hosted Engine Appliance, I am able to get it up
and running, and i can access it only from the server that is hosting it.
The host server can ping the appliance, and the appliance can ping the host
server. The host server can ping the rest of my network and get out
Hi,
I am looking to put together a configuration setup for a new install and was
wondering if it is ok for have both gluster and ovirt running on the same
systems, or if it was better to separate my storage on to anther platform?
I am currently looking into 3 servers with 196 GB Ram, dual 6 cor
move to.
-Original Message-
From: Fernando Fuentes
To: Bryan Sockel , users
Date: Fri, 09 Sep 2016 10:43:46 -0500
Subject: Re: [ovirt-users] Hardware setup
Bryan,
Just my opinion but I would separate storage away from your compute nodes.
Regards,
--
Fernando Fuentes
ffuen...@txwea
Yes that is the document i have been looking at, unfortunately i am still
pretty new to the ovirt/gluster world. But both seem like the would be a
great fit for our goals.
-Original Message-
From: Simone Tiraboschi
To: Bryan Sockel
Cc: users
Date: Fri, 9 Sep 2016 18:12:29 +0200
rg
On Fri, Sep 9, 2016, at 10:28 AM, Bryan Sockel wrote:
Hi,
I am looking to put together a configuration setup for a new install and was
wondering if it is ok for have both gluster and ovirt running on the same
systems, or if it was better to separate my storage on to anther platform?
I
Hi,
I am getting an error attempting to install ovirt on a pair of bonded nics.
The error that we are getting is Cannot acquire nic/bridge address.
We typically run all our servers with an active/backup setup. ___
Users mailing list
Users@ovirt.org
ht
Hi,
We are making our first attempt at importing VM's from VMWare, i am able to
connect to our VMWare environment and i can choose a VM to import and i am
able to start the process. A VM is created, the disk is created as well
then the task completes in ovirt. Looking at my virtual machines,
-
From: Tomáš Golembiovský
To: "Bryan Sockel"
Cc: "users@ovirt.org"
Date: Tue, 25 Oct 2016 00:36:50 +0200
Subject: Re: [ovirt-users] Importing VM's from VMware
Hi,
during the import process engine shows status like "Initializing",
"Copying disk x/y" and
Hi,
We currently have our HostedEngine VM running on a gluster Replica 3 storage
domain. Is there a way to modify the mount options in oVirt to specify the
Backup-Volfile servers? ___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/
Hi,
I am trying to map a host device to a VM, I am able to get the host device
mapped to the VM, but i am unable to start the vm. I receive the following
Error:
Error while executing action:
VM:
Cannot run VM. There is no host that satisfies current scheduling
constraints. See below for de
Ennableing IOMMU fixed it. Thanks.
-Original Message-
From: Martin Polednik
To: Bryan Sockel
Cc: "users@ovirt.org"
Date: Mon, 23 Jan 2017 08:51:52 +0100
Subject: Re: Host Device Mapping
On 20/01/17 14:38 -0600, Bryan Sockel wrote:
>
>Hi,
>
>I am trying to map
Hi,
Came into the office with an issue with my ovirt setup this morning. On one
of my hosts the / partition was completely full causing the host to go into
an unknown state. I was able to clear out some space for the time being and
attempting to recover my that host. VM's are still running a
Need some help. I was doing some work on one of my ovirt hosts, removed it
from cluster, and re-added it to the cluster to bring it back into my
working cluster. I got a messege that my network's where out of sync. I
accidentally sync'd up my working network, now neither of my hosts will
bri
Hi,
I attempted to move a few disks from a glusterFS to an ISCSI file system. I
have number of errors during the process, and it looks like a few of the
disk moves are hung. They are hung at various percentages. in the events,
it says moving Disk X from A to B, validation completes but i copyi
: Idan Shaby
To: Bryan Sockel
Cc: "users@ovirt.org"
Date: Sun, 12 Feb 2017 10:04:57 +0200
Subject: Re: [ovirt-users] Issue with Moving Disks
Hi,
Can you please attach engine and vdsm logs so we can investigate?
Thanks,
Idan
On Sat, Feb 11, 2017 at 9:19 PM, Bryan Sockel wrote:
Hi,
I
Hi,
I am attempting to deploy an appliance to a bonded interface, and i getting
this error when it attempts to setup the bridge:
[ ERROR ] Failed to execute stage 'Misc configuration': Failed to setup
networks {'ovirtmgmt': {'bonding': 'bond0', 'ipaddr': u'10.20.101.181',
'netmask': u'255.25
Guys,
I have recently setup a new Ovirt environment, and i have created a gluster
share for both my Export and ISO Domains. Every time i try and use either
command, i get an access denied error. Here is the verbose output from the
image import:
DEBUG: API Vendor(ovirt.org)API Version(4.1
I was able to get around this by dropping one of the nics out of the bond,
and have the switch port reconfigured for a standard vlan, ran the setup and
reconfigured network and re establish the bond.
-Original Message-
From: Doug Ingham
To: Bryan Sockel
Cc: "users@ovirt.org&q
I have a similar setup i am trying to achieve, but i would like to create 2
bonds to increase the bandwith and then configure 1 bond as a backup to the
primary. Is there some way to do this?
Bryan Sockel
Sent using Alt-N's own MDaemon Messaging Server
Get to know the Alt-N family by l
Is libgfapi supposed to be working in 4.1.7.6?
Bryan
-Original Message-
From: Alessandro De Salvo
To: users@ovirt.org
Date: Thu, 9 Nov 2017 09:35:01 +0100
Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2
Hi again,
OK, tried to stop all the vms, except the engine,
20.102.181/gl-vm12/
Thanks
Bryan
-Original Message-
From: Kasturi Narra
To: Bryan Sockel
Cc: Alessandro De Salvo , users
Date: Tue, 14 Nov 2017 12:56:49 +0530
Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2
yes, it does work with 4.1.7.6 version
On T
Having an issue moving a hard disk from one vm data store new a newly
created gluster data store. I can shut down the machine and copy the hard
drive, detach the old hard drive and attach the new hard drive, but i would
prefer to keep the vm on line when moving the disk.
I have attached a port
Ok Thanks, for some reason i was thinking it was the other way around.
Bryan Sockel
-Original Message-
From: Kasturi Narra
To: Bryan Sockel
Cc: Alessandro De Salvo , users
Date: Wed, 15 Nov 2017 11:48:31 +0530
Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2
Hi
n the switch side that we can make both switches
appear as a single switch and possibly create a bond across switches, but
that is not something we have implemented.
Thanks
Bryan Sockel
-Original Message-
From: Edward Haas
To: Petr Horacek
Cc: Bryan Sockel , users
Date: Thu, 16 Nov 2017
Thank You,
From: "Milan Zamazal (mzama...@redhat.com)"
To: "Bryan Sockel"
Cc: "users\@ovirt.org"
Date: Thu, 01 Mar 2018 17:38:24 +0100
Subject: Re: VM Migrations
"Bryan Sockel" writes:
> I am having an issue migrating all vm's based on a specifi
Hey Guys,
Was working on switching my authentication over to TLS, and during the process
I have lost the Internal Authentication option on my drop down list. Need to
Know how to add it back it back to the list of drop down items.
Thanks
___
Users
Hi,
We are in the process of re-doing one of our storage domains. As part of the
process I needed to relocate my templates over to a temporary domain. To do
this, I copy the disk from one domain to another. In the past I have been able
to go into disk’s and remove the template disk from the
Not entirely sure what happened, but I am no longer able to connect to the
console on any of my vm’s. I receive the error “No CA Found!”.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Hi,
I am having to rebuild my ovirt instance for a couple of reasons. I have
setup a temporary ovirt portal to migrate my setup to while i rebuild my
production portal.
I have run int a couple of VM's that will no longer start.
Everything that i am seeing is identical to this article -
h
Permissions all seem to be correct, path is accessible, can run other vm's
off the same storage domain.
Thank You,
From: "Oliver Riesener (oliver.riese...@hs-bremen.de)"
To: Bryan Sockel
Cc: "users@ovirt.org"
Date: Sun, 27 May 2018 15:38:32 +0200
Subject: [ov
Windows 10 Images, but a couple of
2003/2012 server OS's as well.
Where would be the best place to start looking at why the VM HD's are
getting corrupted?
Thank You,
Bryan Sockel
Systems Administrator
o: 817-601-3222 ext: 233e: bryan.soc...@mdaemon.com
MDaemon Technologies
Simple Se
Array 8 Drives
Read Ahead
Write Through - 512K Stripe
Arbiter server is nothing special, just a server i have laying around.
Thank You,
Bryan Sockel
Systems Administrator
o: 817-601-3222 ext: 233e: bryan.soc...@mdaemon.com
MDaemon Technologies
Simple Secure Email
Visit us on Facebook
te the entry from the database)?
Thank You,
Bryan Sockel
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https:/
Hi,
I am getting an error attempting to install ovirt on a pair of bonded nics.
The error that we are getting is Cannot acquire nic/bridge address.
We typically run all our servers with an active/backup setup.
--
IMPORTANT!
This message has been scanned for viruses and phishing links.
However,
Hi,
I currently have a 4 node ovirt cluster running. Each node is configured with
an active passive network setup, with each link being 10 GB. After looking
over my performance metrics collected via observium. I am noticing the network
traffic rarely exceeds 100 MB. I am noticing this acro
Hi,
I am looking to implement OVN with in my setup, but could use some guidance
on the implementation. As part of the implementation i am planning on
moving from engine being installed on a physical server to running as a VM
with in my environment.
I do not need to retain any historical dat
.
VDSM.Log -
https://docs.google.com/document/d/1RWxka-EtiPHF9KWjvZrVCuV90tVKRZtOefvkXQp34BQ/edit?usp=sharing
Engine.Log -
https://docs.google.com/document/d/1wyGrlxemI_hPgUeVlCibi0AYCO7NL_HVyXv_ICooxUU/edit?usp=sharing
Thank You,
Bryan Sockel
___
Users
53 matches
Mail list logo
