On Wed, 2020-03-18 at 23:50 -0400, Robert McBroom via users wrote:
> Fixing the *.conf entries in /boot/loader/entries gets the UUID
> problem solved and I get to the login screen but my logins are not
> accepted. Copied the original to usb disk from the source with a
> Knoppix live disk so there w
On 3/19/20 6:42 AM, Tim via users wrote:
On Wed, 2020-03-18 at 23:50 -0400, Robert McBroom via users wrote:
Fixing the *.conf entries in /boot/loader/entries gets the UUID
problem solved and I get to the login screen but my logins are not
accepted. Copied the original to usb disk from the source
On Thu, 19 Mar 2020 at 00:58, home user wrote:
> (I'm not sure who I'm replying to!)
>
> I realize I'm not a good writer, but am I really this bad?!
>
It would be helpful to have one message to collect all the details. I'm
following issues across multiple forums and it is easy to get confused
If your graphics are still ok, I prefer gkellm to read temps and display
loads.
70C is at the very upper end of acceptable cpu temps, and is probably
the root cause of your lockups. How hot is the intake airflow? Check
the airflow for obstructions like dirt or cat-hair, and then pull the
co
On Thu, 19 Mar 2020 21:12:51 +1030
Tim via users wrote:
> I want to ask the obvious question: Why is perserving with this
> pallaver better than simply doing a fresh install on the other
> computer?
Because these days anaconda is adamantly opposed to let you
install where you want to install wit
Hi!
I'm using pfsense as my firewall and using it as a loca Certificate
Authority for my servers. I was wondering if it was possible either
through pfsense or through another magical way to push that local CA
rather than having to run update-ca-trust on each machine?
Thank you.
Fred
On 19.03.20 14:22, Tom Horsley wrote:
On Thu, 19 Mar 2020 21:12:51 +1030
Tim via users wrote:
...
Because these days anaconda is adamantly opposed to let you
install where you want to install without wiping out
stuff you didn't want wiped out. Installing a virtual machine
then copying it where
On 19.03.20 11:42, Tim via users wrote:
On Wed, 2020-03-18 at 23:50 -0400, Robert McBroom via users wrote:
Fixing the *.conf entries in /boot/loader/entries gets the UUID
problem solved and I get to the login screen but my logins are not
accepted. Copied the original to usb disk from the source
On Thu, 19 Mar 2020 15:06:52 +0100
sixpack13 wrote:
> 2 days ago I installed F32 on an two disk system keeping my /home and
> the second disk. Reformating the rest.
Try installing on a one disk system in a new partition
without it destroying the existing grub and replacing it
with one that boots
On 19.03.20 18:36, Tom Horsley wrote:
On Thu, 19 Mar 2020 15:06:52 +0100
sixpack13 wrote:
2 days ago I installed F32 on an two disk system keeping my /home and
the second disk. Reformating the rest.
Try installing on a one disk system in a new partition
without it destroying the existing grub
On Thu, 2020-03-19 at 13:36 -0400, Tom Horsley wrote:
> Try installing on a one disk system in a new partition
> without it destroying the existing grub and replacing it
> with one that boots the new partition instead of the old one.
> It will no longer allow you to install grub on a partition,
> i
I did my weekly patches this morning. As Samuel predicted early in this
thread, if I deleted the 2 *rescue* files from /boot, the rescue would
be re-built the next time the OS was patched. That happened. I can
boot into it successfully. I do understand that's not what I'm wanting
anyway.
On Fri, 20 Mar 2020 04:43:56 +1030
Tim via users wrote:
> a. Do not install a bootloader, let me use something else (something
> you've already got, that you're prepared to configure, yourself).
It may allow me to not install grub at all (I forget), but
then I have no way to boot that partition a
On 2020-03-20 04:15, home user wrote:
> No, that's the GPU temperature. I'm wanting the temperature in the Intel
> Core i7.
OK, I misread your post.
Have you tried "sensors"?
[egreshko@meimei ~]$ sensors
coretemp-isa-
Adapter: ISA adapter
Core 0: +38.0°C (high = +82.0°C, crit = +98
On 2020-03-20 05:15, Ed Greshko wrote:
> On 2020-03-20 04:15, home user wrote:
>> No, that's the GPU temperature. I'm wanting the temperature in the Intel
>> Core i7.
> OK, I misread your post.
>
> Have you tried "sensors"?
>
> [egreshko@meimei ~]$ sensors
> coretemp-isa-
> Adapter: ISA adap
15 matches
Mail list logo
